Home-made Electrical Apparatus

By Author	[ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z \| Other Symbols ]
By Title	[ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z \| Other Symbols ]
By Language

Download this book: [ ASCII ]

Look for this book on Amazon

We have new books nearly every day.
If you would like a news letter once a week or once a month fill out this form and we will give you a summary of the books for that week or month by email.

Title: Home-made Electrical Apparatus
Author: Morgan, Alfred Powell
Language: English
As this book started as an ASCII text book there are no pictures available.

*** Start of this LibraryBlog Digital Book "Home-made Electrical Apparatus" ***

This book is indexed by ISYS Web Indexing system to allow the reader find any word or number within the document.

***

This file was produced from page images at the Internet Archive.

Transcriber’s Note

This book was transcribed from scans of the original found at the
Internet Archive. The page scans were done by Google. The original book
was done as three volumes, but the edition I have transcribed put all
three volumes together as a clothbound book. As a result it had three
identical prefaces and duplicated ads. I have included one preface, at
the beginning, and put the ads at the end of the book. I have rotated a
couple of illustrations.

Arts and Science Series No. 7

Home-made

Electrical Apparatus

A Practical Handbook for Amateur

Experimenters

In Three Parts

*Volume I*

_Second Edition_

*BY*

*A. M. Powell*

PUBLISHED BY

COLE & MORGAN, Inc.

Publishers of the Arts and Science Series

P.O. BOX 473 CITY HALL STATION

NEW YORK, N. Y.

Printed in U. S. A.

COLE & MORGAN, Inc.

PREFACE

The purpose of this book is to aid the young experimenter in building
and operating his own electrical apparatus and instruments. Every boy of
now-a-days experiments with electricity and the right sort of book which
furnishes him with ideas gets close to his heart. Of books upon
electricity there is no end. That is granted. But there are very few
_practical_ books for the young experimenter who wishes to construct
miscellaneous electrical apparatus for his own amusement and instruction
which really amounts to something and which is worth his pains when the
labor has been finished.

This book is therefore offered as a volume of instruction for making all
sorts of batteries, rectifiers, motors, etc., which are entirely out of
the toy class and yet are not so elaborate that they cannot be easily
constructed _at home_ by the average boy who is willing to put a little
care into his work. The materials required are such that they can he
procured without any great expense.

It has been planned to present the material in such a manner that it
will aid the judgment of the young experimenter and assist him in
developing his own ideas. Without exception, all of the apparatus
described in the following pages has been actually constructed by the
author, not only once but many times and put to a practical test before
being embodied into the book. You may therefore be sure that if you
follow the instructions carefully, that the result will in each case be
a substantial piece of apparatus which is capable of fulfilling all of
your expectations.

The drawings have all been reproduced on a large scale and in almost
every case the dimensions of even the smallest details have been given.
Some of the apparatus has been described in the pages of the "Boys’
Magazine" and since its publication the readers of that magazine have
written to the author asking questions about the apparatus which have
enabled him when rewriting the material for publication in book form to
clear up many questions and further explain in a little more detail many
of the problems which naturally occur to the boy who likes to build his
own electrical devices.

THE AUTHOR.

PREFACE ...........................................................
CHAPTER I. STATIC ELECTRICAL APPARATUS ............................
How to Build a Wimshurst Machine. ...............................
Experiments with Static Electrical Apparatus. ...................
CHAPTER II. CELLS AND BATTERIES. ..................................
The Voltaic Cell. ...............................................
Homemade Batteries. .............................................
Battery Solutions or Electrolytes. ..............................
Connecting Cells. ...............................................
Storage or Secondary Cells. .....................................
An Experimental Storage Cell. ...................................
A Homemade Storage Cell. ........................................
Recharging and Caring for Storage Cells. ........................
CHAPTER III. HOW TO REDUCE THE 110 V. D.C. OR A.C. TO A LOWER
VOLTAGE FOR EXPERIMENTAL PURPOSES. ................................
CHAPTER IV. HOW AN ALTERNATING CURRENT MAY BE CHANGED INTO DIRECT
CURRENT BY MEANS OF AN ELECTROLYTIC RECTIFIER. ....................
CHAPTER V. HOW TO BUILD A STEP-DOWN TRANSFORMER FOR REDUCING THE 110
VOLT A. C. FOR EXPERIMENTAL PURPOSES. .............................
CHAPTER VI. ELECTRIC MEASURING INSTRUMENTS ........................
Galvanometers, Ammeters, Voltmeters. How to Make a Galvanometer. .
The Construction of Ammeters and Voltmeters. ....................
CHAPTER VII. CURRENT CONTROL DEVICES. .............................
How to Make a Pole Changing Switch or Current Reverses How to
Reverse a Small Motor. ..........................................
How to Make a Small Battery Rheostat for Regulating the Speed of
Small Motors, Etc. ..............................................
CHAPTER VIII. HOW TO MAKE A TELEGRAPH KEY AND SOUNDER AND INSTALL A
TELEGRAPH LINE. ...................................................
CHAPTER IX. HOW TO MAKE AND INSTALL A TELEPHONE. ..................
CHAPTER X. MEDICAL COILS AND SHOCKING COILS. ......................
CHAPTER XI. THE CONSTRUCTION OF SPARK COILS. ......................
Experiment 1—An Imitation Gassiot’s Cascade. ....................
Experiment 2—A Ghostly Light ....................................
Experiment 3—Lighting Geissler Tubes. ...........................
Experiment 4—Flickering Light. ..................................
Experiment 5—Rotating a Geissler Tube. ..........................
Experiment 6—Fluorescent Writing. ...............................
Experiment 7—An Electric Bomb. ..................................
Experiment 8—Electrifying the Garbage Can. ......................
Experiment 9—How to Make an Electric Spark Photograph Itself. ...
CHAPTER XII. HOW TO MAKE A DYNAMO-MOTOR ...........................
CHAPTER XIII. AN ELECTRIC BATTERY MOTOR. ..........................
CHAPTER XIV. HOW TO BUILD AN ELECTRIC ENGINE. .....................
CHAPTER XV. MINIATURE BATTERY LIGHTING. ...........................
CHAPTER XVI. COHERER OUTFITS FOR WIRELESS TELEGRAPHY. .............
CHAPTER XVII. HOW TO BUILD A TESLA HIGH FREQUENCY COIL. ...........
CHAPTER XVIII. AN EXPERIMENTAL WIRELESS TELEPHONE. ................
CHAPTER XIX. MISCELLANEOUS EXPERIMENTS AND APPARATUS. .............
ELECTROLYSIS. ...................................................
ELECTROPLATING. .................................................
ELECTRIC CURRENT GENERATED BY HEAT. .............................
A HANDY LIGHT. ..................................................
AN EXPERIMENTAL ARC LAMP. .......................................
A MAGNETIC DIVER. ...............................................
THE MAGNETIC FISH. ..............................................
A MAGNETIC CLOWN. ...............................................
AN ELECTRIC BREEZE. .............................................
A STATIC MOTOR. .................................................

FIG. 1.—A simple Wimshurst Machine which any boy can easily make. P
P, Plates; BR, Neutralizes; C R, Collectors; DR, Discharge Rods; J
J, Leyden Jars; H H, Insulating Handles; C, Crank; U, Upright; B,
Belt. .............................................................
FIG. 2.—The plates for the Static Machine are made of hard rubber
and are 7 inches in diameter. Each plate carries sixteen tinfoil
sectors. ..........................................................
FIG. 3.—The details of the Tinfoil Sector. Sixteen are required for
each plate. They are stuck to the plates with shellac. ............
FIG. 4.—Details of the Grooved Pulley, attached to each plate. The
Pulleys are turned out of wood. ...................................
FIG. 5.—The base of the Wimshurst Machine. All woodwork about the
machine should be carefully dried and then shellaced so that it
cannot absorb any moisture. .......................................
FIG. 6.—Details of one of the Uprights which support the Plates,
Driving Pulleys, etc. These, being made of wood, should also be
dried and shellaced so that they cannot absorb moisture. ..........
FIG. 7.—Showing the Two Uprights in position on the Base. .........
FIG. 8.—The Driving Pulleys. These are turned out of wood and
mounted on a shaft having a Crank at one end. .....................
FIG. 9.—The Crank is bent out of a piece of 3/16 rod, 7 inches long,
into the shape shown. .............................................
FIG. 10.—The Collector with the Discharge Rods, etc, in position. A
is the Brass Ball forming one terminal of the gap across which the
sparks jump. B is another Brass Ball screwed onto the end of the
Collector Rod and having a hole in it, through which the Discharge
Rod slips. CC are two threaded Washers used to clamp the Discharge
Rod in place. .....................................................
FIG. 11.—Showing how Binding Posts may be substituted for Round
Balls on the Collector Rods. ......................................
FIG. 12.—Details of the Discharger Rods. ..........................
FIG. 13.—The Supporting Bar upon which the Collector Rods are
mounted. Made of hard rubber so as to be a perfect Insulator. .....
FIG. 14.—The Neutralizers. Two are required. They are bent out of
Brass Rod and fitted with a Tinsel Tuft at each end. The centre
piece upon which the Rod is mounted should be of Hard Rubber. ....
FIG. 15.—Details of the Leyden Jars. They are simply small Test
Tubes, coated inside and outside with tinfoil for about two-thirds
their height and fitted with a Brass Rod connected with the inside
coating. ..........................................................
FIG. 16.—A Large Leyden Jar for experimental purposes. ............
FIG. 17.—Showing how to Discharge a Leyden Jar with a curved piece
of stiff wire fitted to a Wooden Handle. ..........................
FIG. 18.—The "Lightning Board" is simply a Strip of Glass covered
with small Tinfoil Squares. It may be insulated by mounting on a
Bottle. The two Wires attached to the wide Tinfoil Strips at the
ends of the "Board" are for connection to the Static Machine or
Leyden Jar. .......................................................
FIG. 19.—A very pretty effect can be produced by arranging small
tinfoil strips on the Glass in a Pattern. Each strip should be
separated from the other just far enough for a Spark to pass. .....
FIG. 20.—A very pretty design made by arranging the Strips in the
form of a Seven-pointed Star. Flowers, initials or almost any
pattern may be made in the same way. ..............................
FIG. 21.—The Electric Parasol. The upper right-hand corner shows a
piece of Tissue Paper cut into Strips. (1) Is the apparatus before
the Tissue Paper is fastened to the Cork. (2) Shows the completed
"Parasol" and (3), the Parasol when connected to the machine and the
latter is set in operation. .......................................
FIG. 22.—Electric Birds. The Birds are made of Tissue Paper and
should be about the size and shape shown in the lower right-hand
corner of the illustration above. .................................
FIG. 23.—Electric Acrobats. The Acrobats are made of paper. The
little figure in the upper right-hand part of the illustration is
the proper size. ..................................................
FIG. 24.—The Electric Mortar. C is the Mortar, P the Powder, B a
Small Ball and W W the two Wires between which the Spark igniting
the powder takes place. ...........................................
FIG. 25.—An Electric Whirligig. ...................................
FIG. 26.—A Voltaic Cell. A Voltaic Cell consists of a Strip of
Copper and a Strip of Zinc immersed in a dilute solution of
Sulphuric Acid. ...................................................
FIG. 27.—Ordinary Jelly Glasses, Tumblers, Fruit Jars, etc, make
good Jars for small cells by cutting off the tops. ................
FIG. 28.—A Simple Home-made Cell. .................................
FIG. 29.—A Home-made Battery having two Carbon Plates with a Zinc
Rod between. ......................................................
FIG. 30.—The Elements for a Simple Home-made Cell composed of two
Carbon Rods and one Zinc Rod clamped between two Wooden Strips. ...
FIG. 31.—Four Carbon Rods and one Zinc Rod arranged to form the
Elements of a Cell. ...............................................
FIG. 32.—A Battery of Three Cells arranged so that they can all be
lifted out of the solution at once. ...............................
FIG. 33.—Showing how Cells are arranged when they are connected in
Series. The Voltage of Six Dry Cells connected in series as above
would be approximately 6 x 1.5 or 9 Volts. ........................
FIG. 34.—Showing Six Dry Cells connected in Multiple. The Voltage of
such an arrangement would only be 1.5, but the Amperage available
would be six times that possible from Cells connected as in Figure
33. ...............................................................
FIG. 35.—Showing how to connect a Battery of Cells in
Series-Multiple. ..................................................
FIG. 36.—Battery Connectors like that shown above can be obtained
for 1 1/2 cents each and will be found to be very handy. ..........
FIG. 37.—A Simple Experimental Storage Battery consisting of two
Lead Plates immersed in Dilute Sulphuric Acid. ....................
FIG. 38.—Showing how to charge a Simple Storage Cell composed of two
Lead Plates immersed in Sulphuric Acid by connecting it to two
Bichromate of Potash Cells. .......................................
FIG. 39.—Showing how the Plates for a Storage Cell may be made from
Sheet Lead by boring it full of holes and filling with paste. .....
FIG. 40.—A set of three Plates composed of One Positive and Three
Negatives assembled to form a Cell. ...............................
FIG. 41.—Glass and Rubber Storage Cell Jars which are on the market
for the Electrical Experimenter and may be purchased very
reasonably. .......................................................
FIG. 42.—An empty Storage Cell Grid and also a Pasted Plate both of
which are on the market for experimenters who wish to build their
own Cells. ........................................................
FIG. 43.—Two Negative Plates "burned" together and the Connecting
Lug used. .........................................................
FIG. 44.—The Elements of a Storage Cell composed of two Negative
Plates and one Positive Plate in their proper position. ...........
FIG. 45.—Three different sizes of Storage Cells which may be
purchased ready made or built by the experimenter out of prepared
materials as explained. ...........................................
FIG. 46.—A Hydrometer for preparing and testing the Acid Solution
for Storage Batteries. ............................................
FIG. 47.—The proper way of Recharging Storage Cells from the 110
Volts D. C. Supply in series with a set of Lamps. .................
FIG. 48.—A Lamp Bank consisting of a Set of 110-Volt Lamps connected
Multiple and arranged to be placed in series with any device it is
desired to use on the 110-Volt Current. ...........................
FIG. 49.—A Single Cell of Electrolytic Rectifier. .................
FIG. 50.—An Electrode cut out of Sheet Metal. The top is bent over
at right angles and drilled so that it can be mounted on the
underside of the cover. ...........................................
FIG 51.—A Cast Electrode will last much longer than one cut from
Sheet Metal. Cast Electrodes like that above are on the market and
can be purchased very reasonably. .................................
FIG. 52.—A completed single Cell Rectifier. The right hand sketch
shows how the Electrodes are mounted on the underside of the cover.
FIG. 53.—A Diagram showing how a Rectifier cuts off one-half of the
Alternating Current Wave and changes it into Pulsating Direct
Current. ..........................................................
FIG. 54.—Circuit showing how a Single Cell of Rectifier should be
connected in series with a Lamp Bank to Recharge a Storage Cell. A
is the Aluminum Plate and L the Lead or Iron Plate. ...............
FIG. 55.—Diagram showing the Difference in Current after it has been
passed through a Single Cell or Rectifier and after passing through
a Four-Cell Rectifier. ............................................
FIG. 56.—Diagram showing how a Four-Cell Rectifier is connected. The
Alternating Current Source is connected to C and D. The Direct
Current is taken off at A and B. The Electrodes marked A, A, A, A
are the Aluminum Electrodes. L, L, L, L may be Lead or Iron. ......
FIG. 57—A Complete Four-Cell Rectifier connected together and
Mounted in a Tray. ................................................
FIG. 58.—Details of the two different Pieces of Sheet Iron used in
building up the Core. Sufficient of each piece are required to form
a pile of each three-quarters of an inch thick. ...................
FIG. 59.—The Method used in piling up the Strips to Assemble the
Core. .............................................................
FIG. 60.—Assembly of the Core. ....................................
FIG. 61.—Details of the Primary and Secondary Windings. ...........
FIG. 62.—Showing the Core completely assembled with the Primary and
Secondary in position. P, P are the Primary Terminals. 1, 2 and 3
are the Secondary Terminals. ......................................
FIG. 63.—The Step-down Transformer mounted on a Wooden Base. ......
FIG. 64.—A detailed Drawing showing how the Sides of the Case are
formed by bending a long strip of Sheet Iron at four points. ......
FIG. 65.—Details of the Top and Bottom of the Case. ...............
FIG. 66.—The completed Transformer. ...............................
FIG. 67.—A Simple Galvanometer. ...................................
FIG. 68.—Details of the Bobbin. ...................................
FIG. 69.—Details of the Armature, Bearings and Pointer. ...........
FIG. 70.—A complete Voltmeter having the Scale at the top. ........
FIG. 71—An Ammeter so constructed that the Scale is at the bottom. .
FIG. 72.—Showing how the Armature, Shaft and Pointer are assembled
for a Meter having the Scale at the bottom. .......................
FIG. 73.—Details of the Wooden Parts which form the Case. .........
FIG. 74.—Showing how the Apparatus is arranged and connected for
calibrating the Ammeter. ..........................................
FIG. 75.—Showing how the Apparatus is arranged and connected for
calibrating the Voltmeter. ........................................
FIG. 76.—A Pole changing Switch for reversing Small Motors or the
direction of an Electric Current. .................................
FIG. 77.—Top view of a small Battery Rheostat .....................
FIG. 78.—Details of the Rheostat Base. The lower part of the
illustration is a cross section. ..................................
FIG. 79.—Looking at the Base from the bottom showing the grooves in
which the Wires are laid. .........................................
FIG. 80.—The German-silver Resistance Wire is wound around a Fibre
Strip. ............................................................
FIG. 81.—The Lever, Knob, Binding Posts, etc. .....................
FIG. 82.—The completed Rheostat. ..................................
FIG. 83.—Key Frame. ...............................................
FIG. 84.—Sounder Frame. ...........................................
FIG. 85.—The Electro Magnets. .....................................
FIG. 86—The Sounder Armature. .....................................
FIG. 87.—Sounder Frame with Lever in Position. ....................
FIG. 88.—Top View of Completed Instrument .........................
FIG. 89.—Side View of Key. ........................................
FIG. 90.—Key and Circuit Closing Levers. ..........................
FIG. 91.—American Morse Code. .....................................
FIG. 92.—Circuit for Two Instruments. .............................
FIG. 93.—The Wooden Back for the Telephone. .......................
FIG. 94.—The Complete Telephone. ..................................
FIG. 95.—Details of the Receiver Hook. ............................
FIG. 96.—Showing how the Push Button is arranged. .................
FIG. 97.—Circuit showing how to connect two Telephone Stations to
the Line. .........................................................
FIG. 98.—Bobbin for Medical Coil. .................................
FIG. 99.—Bobbin with Winding. .....................................
FIG. 100.—Construction of the Core. ...............................
FIG. 101.—Vibrator Parts and Core Cap. ............................
FIG. 102.—Regulator Tube. .........................................
FIG. 103.—The Base with Location of Holes. ........................
FIG. 104.—Top View of Finished Coil. ..............................
FIG. 105.—Side View of Completed Coil. ............................
FIG. 106.—Vibrator Parts. .........................................
FIGS. 107 and 108.—Two Types of Handles. ..........................
FIG. 109.—Induction or Spark Coil. ................................
FIG. 110.—The Primary and Core. ...................................
FIG. 111.—The Secondary Winding. ..................................
FIG. 112.—The Fixed Condenser. ....................................
FIG. 113.—Details of the Wooden Coil Heads. .......................
FIG. 114.—Details of the Wooden Base. .............................
FIG. 115.—Details of the Interrupter. The Spring and Standard for
the One inch coil should be made one-quarter of an inch longer. ...
FIG. 116.—The tube. ...............................................
FIG. 117.—The Bridge. .............................................
FIG. 118.—Section of the Spark Coil showing the arrangement of the
Parts. ............................................................
FIG. 119.—End View of the Complete Coil. ..........................
FIG. 120.—Side View of the Completed Coil. ........................
FIG. 121.—Diagram of Connections. .................................
FIG. 122.—Perspective view of Coil showing names of the various
parts. ............................................................
FIG. 123—Front view of the Field Casting. .........................
FIG. 124.—Side elevation of the Field Casting. ....................
FIG. 125.—Details of the Armature. ................................
FIG. 126.—The Commutator. .........................................
FIG. 127.—The Armature and Commutator Assembled on the Shaft ready
for winding. ......................................................
FIG. 128.—Details of the Wooden Base. .............................
FIG. 129.—Details of the Bearings. ................................
FIG. 130.—The Pulley. .............................................
FIG. 131.—The Brushes. ............................................
FIG. 132.—The Completed Dynamo. ...................................
FIG. 133.—The completed Electric Motor. ...........................
FIG. 134.—Details of the Field Frame. .............................
FIG. 135.—The Assembled Field ready for Winding. ..................
FIG. 136.—Details of the Armature Lamination. .....................
FIG. 137.—The Armature assembled on the Shaft ready to Wind. ......
FIG. 138.—The Commutator. .........................................
FIG. 139.—Diagram showing how the Armature Coils are connected to
the Commutator Sections. ..........................................
FIG. 140.—The Bearings. ...........................................
FIG. 141.—The Brushes. ............................................
FIG. 142.—The Fibre Block for supporting each Brush. ..............
FIG. 143.—Completed Electric Engine. ..............................
FIG. 144.—The Engine Base. ........................................
FIG. 145.—Details of the Electromagnet Bobbin. ....................
FIG. 146.—Details of the Engine Frame. ............................
FIG. 147—The Bearings. ............................................
FIG. 148.—Details of the Shaft. ...................................
FIG. 149.—The Armature, Armature Bearing and Connecting Rod. ......
FIG. 150.—The Brushes. ............................................
FIG. 151.—A Flywheel may be cut from sheet iron. ..................
FIG. 152.—Small Tungsten Battery Lamps. ...........................
FIG. 153.—A Simple Lighting Arrangement. ..........................
FIG. 154.—Showing the differences between the Candelabra, Single
Ediswan and Double Ediswan Types of Lamp Bases. ...................
FIG. 155.—Miniature Sockets of the types known as "Flat Base
Porcelain," "Pin" and "Weatherproof." .............................
FIG. 156.—Connections for a 2.8 Volt Lamp. ........................
FIG. 157.—A Miniature Base Tungsten Filament Battery Lamp for small
lighting. .........................................................
FIG. 158.—A Tungsten Automobile Lamp with Ediswan Base. ...........
FIG. 159.—Lamps Controlled by One Switch. .........................
FIG. 160.—Lamps Controlled by Separate switches. ..................
FIG. 161.—Double Control System. ..................................
FIG. 162.—The Coherer Details. ....................................
FIG. 163.—The Complete Coherer. ...................................
FIG. 164.—Pony Type Relay. ........................................
FIG. 165.—Connections for the Receiving Set. ......................
FIG. 166.—Coherer, Decoherer and Relay Connections. ...............
FIG. 167.—How the Transmitter is Connected. .......................
FIG. 168.—The Complete Spark Gap. .................................
FIG. 169.—Details of Spark Gap. ...................................
FIG. 170.—Tesla Coil Circuits. ....................................
FIG. 171.—Secondary Tube. .........................................
FIG. 172.—Details of the Secondary Heads. .........................
FIG. 173.—Details of the Primary Head. ............................
FIG. 174.—Primary Cross Bar. ......................................
FIG. 175.—Front View of the completed Tesla Coil. .................
FIG. 176—Side View of the completed Tesla Coil. ...................
FIG. 177.—Diagram of connections for operating the Coil. ..........
FIG. 178.—Plate Glass Condenser. ..................................
FIG. 179.—When a Bar Magnet is plunged into a Hollow Coil of Wire, a
Momentary Current of Electricity is Generated. ....................
FIG. 180.—Magnetic Phantom showing the Lines of Force about a Bar
Magnet. ...........................................................
FIG. 181.—Magnetic Phantom about a Coil of Wire carrying a current.
FIG. 182.—Illustrating the Principle of the Induction Wireless
Telephone. ........................................................
FIG. 183.—Showing how the Coils may be formed by winding around
nails set in a circle in the Floor. ...............................
FIG. 184.—Circuit Diagram showing how the Coil is connected so as to
serve for either transmitting or receiving. .......................
FIG. 185.—Apparatus for Electrolysis Experiment. ..................
FIG. 186.—Electroplating Tank. ....................................
FIG. 187.—Generating Electric Current by Heat. ....................
FIG. 188.—A Handy Light. ..........................................
FIG. 189.—Experimental Arc Lamp. ..................................
FIG. 190.—The Magnetic Diver. .....................................
FIG. 191.—The Magnetic Fish. ......................................
FIG. 192.—The Magnetic Clown. .....................................
FIG. 193.—An Electric Breeze. .....................................
FIG. 194.—The Static Motor. .......................................

CHAPTER I. STATIC ELECTRICAL APPARATUS

*Static Electricity. How to Build a Wimshurst Machine. Experiments with
Static Electrical Apparatus.*

*Static Electricity* is an extremely interesting subject for the amateur
experimenter, in view of the many spectacular experiments which may be
performed with it. The number of such experiments is almost unlimited.

Static electricity was the first evidence of the wonderful force which
in the present day moves trains, lights our homes, etc., to come to the
notice of man. Long before the days of batteries, dynamos, telegraphs,
electric lights and before, perhaps, such things were even dreamed of,
static electricity absorbed the attention of scientists, and the names
of some of the world’s greatest men such as for instance, Aristotle,
Roger Bacon, Gilbert, Boyle, Newton, Franklin, etc., are closely linked
with its history. It is probably safe to say that experiments with
static electricity led the famous Italian, Galvani, to the discovery of
the sort of electricity called *galvanic* currents, and to the battery.
Galvanic current is the sort of electricity produced by batteries and
has the same properties in many ways as that generated by huge dynamos
in the power houses of to-day.

The modern boy can duplicate these old experiments far more easily and
on a larger scale than any of the old scientists could, owing to the
fact that he is supplied with explicit directions and can easily obtain
the necessary materials at a neighboring hardware or electrical store,
whereas men like Newton and Franklin not only had to *devise* or
*invent* their own apparatus but make their materials as well.

How to Build a Wimshurst Machine.

Static electricity and lightning are the same thing.

A boy can produce static electricity in small quantities by rubbing a
glass rod with a piece of flannel or silk.

[Illustration: FIG. 1.—A simple Wimshurst Machine which any boy can
easily make. P P, Plates; BR, Neutralizes; C R, Collectors; DR,
Discharge Rods; J J, Leyden Jars; H H, Insulating Handles; C, Crank; U,
Upright; B, Belt.]

Rub the rod briskly and then hold it over some tiny bits of paper or
specks of dust and watch them jump up to meet the rod, just as if the
latter were a magnet attracting small tacks or nails. It is static
electricity which gives the rod this wonderful power. If you rub the rod
briskly and then hold it close to your cheek, you will feel a slight
tickling and hear a faint crackling sound. If this is done in the dark
you may be able to see a very faint phosphorescent light or even small
sparks.

The quantity of electricity produced in this manner by rubbing a glass
rod is extremely limited and while a number of very interesting and
instructive experiments may be performed in this manner, the most
spectacular ones are only possible with the aid of a "static-machine".

[Illustration: FIG. 2.—The plates for the Static Machine are made of
hard rubber and are 7 inches in diameter. Each plate carries sixteen
tinfoil sectors.]

The most practical form of static machine is that known as the
"Wimshurst". It consists of two circular plates made of glass or hard
rubber arranged so that by turning a crank, they may be revolved in
opposite directions. On these plates are a number of small strips of
tinfoil. The static electricity is generated on these tinfoil strips and
collected by two metal rods having small pins arranged along them in a
row.

A simple form of Wimshurst machine which any boy can easily make is
illustrated in Figure 1. It will generate considerable static
electricity and will make sparks two inches long.

*The Plates* on these machines are hard rubber. They are illustrated in
Figure 2. Glass is usually used for static machine plates, but has the
disadvantage of breaking easily. It is also hard for the young
experimenter to cut out circular glass plates and drill them. The author
has had very good success with hard rubber.

[Illustration: FIG. 3.—The details of the Tinfoil Sector. Sixteen are
required for each plate. They are stuck to the plates with shellac.]

Two plates are required for the machine. They should be in the form of
circles seven inches in diameter and be perfectly true. They need to be
only one-sixteenth of an inch thick. The rubber should be perfectly flat
and not warped at any point.

*The Sectors*, as the tinfoil strips are called, are wedge shaped pieces
having rounded ends as shown in Figure 3. They should be cut of heavy
tinfoil. Thirty-two sectors are required, sixteen for each plate. They
are seven-sixteenths of an inch wide at the top, one inch long and
five-sixteenth of an inch wide at the bottom.

The plates should be very carefully cleaned by rubbing with a dry cloth
and then laid on a flat surface all ready to receive the sectors.

The sectors should be stuck to the plates with thick shellac. They
should be arranged all on one face, symmetrically and at equal distances
apart, with the inner ends resting on a circle four and one-half inches
in diameter. Each sector should be carefully pressed down on the rubber
so that it sticks smoothly without any air bubbles or creases.

Both plates should be treated in the same manner.

[Illustration: FIG. 4.—Details of the Grooved Pulley, attached to each
plate. The Pulleys are turned out of wood.]

*The Pulley* illustrated in Figure 4 is one inch in diameter and
eleven-sixteenths of an inch thick. Two of these pulleys will be
required. The hole through the centre should be about three-sixteenths
of an inch in diameter. One pulley should be attached to each of the
rubber plates. The large face of the pulley should be against the face
of the plate upon which the tinfoil sectors are mounted. The hole in the
centre of the pulley should line up perfectly with a hole of the same
size in the centre of each one of the plates. The plates are fastened to
the pulleys by three small brass nails driven into the wood through
small holes in the rubber.

*The Base* of the machine is a rectangular shaped piece of wood six
inches long, four inches wide and three-quarters of an inch thick. A
notch, one inch wide and one-half an inch deep is cut in the centre of
the front and back as shown in Figure 5. The purpose of these notches is
to receive the uprights.

*The Uprights* are strips of wood, seven inches long, one inch wide and
one-half an inch thick. The tipper end of each of the uprights is
rounded as shown in Figure 6.

[Illustration: FIG. 5.—The base of the Wimshurst Machine. All woodwork
about the machine should be carefully dried and then shellaced so that
it cannot absorb any moisture.]

Two holes should be bored through each of the uprights from front to
back. The lower hole is three-sixteenths of an inch in diameter and two
and one-quarter inches from the bottom. The upper hole is six and
one-half inches from the bottom and is between one-eighth and
three-sixteenths of an inch in diameter so that a three-sixteenth rod
driven into it will fit tightly.

The uprights should be mounted in position in the base and fastened with
screws.

The plates are mounted between the upper ends of the uprights in the
position shown in Figure 1, by driving a short piece of 3/16 round brass
rod through the uprights into the holes in the centre of the pulleys.
The rod used to mount the back plate should be one and one-half inches
long and that used for the front plate one and five-eighths inches long.
The 3/16 hole in the pulleys should be large enough so that the latter
will revolve freely.

The plates are revolved by two driving pulleys provided with a crank for
turning.

*The Driving Pulleys* are shown in Figure 8. They are not so easy to
make as the small pulleys attached to the plates. They are turned out of
wood and should be both alike. The exact shape and dimensions are shown
in the illustration. The hole through the centre should be a scant
three-sixteenths of an inch so that the pulleys will force onto a 3/16
rod very tightly.

*The Crank* is bent out of a piece of brass or steel rod about seven
inches long. The straight portion, forming the shaft upon which the
pulleys are mounted, is three and seven-eighths inches long. The portion
at right angles to this, forming what is known as the "throw" of the
crank, is one inch and seven-eighths. The part forming the crank handle
is one inch and one-quarter long.

[Illustration: FIG. 6.—Details of one of the Uprights which support the
Plates, Driving Pulleys, etc. These, being made of wood, should also be
dried and shellaced so that they cannot absorb moisture.]

The driving pulleys are placed between the two standards with the small
projecting portions or "bosses" nearest the uprights. The straight
portion of the crank should then be slipped through the hole in the
front upright and driven tightly into the driving pulleys. The driving
pulleys should fit so tightly onto the shaft that they will not slip.
The end of the shaft should project through the pulleys far enough so
that is rests in the hole in the rear standard.

The holes in the uprights or standards should be just large enough so
that the shaft will turn freely. The driving pulleys should be lined up
so that the groove in each comes directly under the groove in the
corresponding pulley attached to the plate above.

*The Belts* consist simply of heavy cotton cord. The rear belt should be
crossed so that the rear plate runs in the opposite direction from the
front plate when the crank is turned.

The electricity is collected from the sectors on the plates by two

*Collectors.* These are illustrated in Figure 10 and consists of a piece
of 5/32 brass rod, about six inches long, bent into the shape shown. Two
small tufts of "tinsel" are soldered to the U-shaped portion of the
collector so that when the latter is placed in its proper position on
the machine, they will brush against the tinfoil-sectors as they pass
when the plates revolve.

[Illustration: FIG. 7.—Showing the Two Uprights in position on the
Base.]

The other end of the rod is threaded to fit into a hole in a small brass
ball about three-eighths or one-half inch in diameter. Many
experimenters may have difficulty in securing a suitable brass ball for
this purpose. An ordinary binding post may be used instead. The hole in
the bottom of a binding post is usually threaded to fit an 8-32 screw.
The end of the rod is just the right size to receive an 8-32 thread and
so there should be no trouble in getting the parts to fit. The brass
ball is marked "A" in the illustration. The ball is preferable to the
binding because it has no sharp corners from which the electricity might
leak. Static electricity leaks from sharp edges or corners and they must
always be avoided as far as possible in the construction of static
apparatus.

The end of the rod where it screws into the ball or binding post should
be threaded back for a distance of about three-quarters of an inch and
two brass nuts screwed onto the rod. These nuts are marked "C" in the
illustration.

[Illustration: FIG. 8.—The Driving Pulleys. These are turned out of wood
and mounted on a shaft having a Crank at one end.]

The collectors are held in position by the supporting bar illustrated in
Figure 13. This bar is made of a strip of hard rubber, five and one
quarter inches long, five-eighths of an inch wide and three-sixteenths
of an inch thick.

Three holes, each five-thirty-seconds of an inch in diameter, should be
bored in the bar. One hole should be exactly in the centre and the other
holes seven-sixteenths of an inch back from the end.

The centre hole is slipped over the end of the shaft which projects
through the front standard supporting the plate and the bar fastened
across the support at right angles like a cross by driving in two small
brass nails or screws through holes made in the rubber for that purpose.

The threaded portion of the collector rods should be slipped through the
holes near the ends of the hard rubber bar and clamped firmly in
position by placing one of the nuts "C" on the back and the other on the
front and tightening them up.

The exact position of the collectors is best understood from Figure 1.
They are lettered C R in the illustration. The brass balls B are screwed
onto the ends of the rods after the nuts have been tightened. Each of
these balls should have a hole, one-eighth of an inch in diameter
drilled through it at right angles to the collector rod. The hole
provided in the binding post for the accommodation of the wire may be
used in case binding posts are employed instead of the rods.

These holes are to accommodate the Discharge Rods, which are two round
brass rods, one-eighth of an inch in diameter and three and one-half
inches long. One end of each of the rods is fitted with a small brass
ball.

[Illustration: FIG. 9.—The Crank is bent out of a piece of 3/16 rod, 7
inches long, into the shape shown.]

The other end of each is provided with a small insulating handle. A No.
8003 Electrose Knob is just the thing. These knobs are provided with a
threaded bushing so that they may be screwed onto the rod.

The proper position for the discharge rods is shown in Figure 1. By
sliding the rods back and forth in the balls on the ends of the
collectors, the distance between the balls on the ends of the rods may
be varied.

The spark discharge from the machine, when the latter is completed,
takes place between these balls.

The machine still remains to be fitted with the "neutralizers" and a set
of Leyden jars.

*The Neutralizers* are illustrated in Figure 14. Two are required. They
consist of a piece of one-eighth inch brass rod, six inches long, having
the ends bent over at right angles so as to form a shallow U. The
distance between the ends when bent should be about three and
five-eights inches. A tuft of tinsel should be soldered to the ends of
each of the neutralizers.

[Illustration: FIG. 10.—The Collector with the Discharge Rods, etc, in
position. A is the Brass Ball forming one terminal of the gap across
which the sparks jump. B is another Brass Ball screwed onto the end of
the Collector Rod and having a hole in it, through which the Discharge
Rod slips. CC are two threaded Washers used to clamp the Discharge Rod
in place.]

Each neutralizer rod is supported by a hard rubber washer three-quarters
of an inch in diameter and five-sixteenths of an inch thick. In the
centre of the washer a hole should be drilled, which will fit snugly
onto the rods upon which the plates are mounted and revolve. The
neutralizer rod passes through a hole in the upper part of the washer as
shown in the illustration.

Before the neutralizers can be put into position it will be necessary to
pull out the rods which support the plates so that the plates can be
removed. The hard rubber washers supporting the neutralizers are then
slipped over the rods so that one will come between each support and
plate when the latter is put back into position. The rods should be
turned so that the tinsel tufts touch the sectors. The rubber washers
should fit snugly on the rods so that the neutralizer will stay in any
position in which it is placed. The proper position for the front
neutralizer is a little less than half way between vertical and
horizontal as shown in Figure 1. The neutralizer behind the rear plate
should be at right angles to that in front.

[Illustration: FIG. 11.—Showing how Binding Posts may be substituted for
Round Balls on the Collector Rods.]

The machine is now all ready for operation. In order for it to operate
satisfactorily it is necessary for it to be warm and dry. It is,
therefore, a very good idea to thoroughly dry the woodwork and give it a
coat of varnish or shellac so that it cannot absorb any moisture. It may
be necessary to start the machine by rubbing a glass rod with a piece of
flannel or silk and then touching the rod to some of the sectors. The
handle of the machine should be turned from left to right, that is, in
such a direction that the front plate revolves in the same direction as
the hands of a clock.

If the machine is in proper working order a stream of small sparks
should flow between the spark balls on the ends of the discharger rods,
provided they are not over a half inch apart, when the crank is turned.

The spark can be intensified and lengthened by fitting the machine with
two small Leyden jars.

*The Leyden Jars* are made from small test tubes three inches long. The
inside of the tube should be coated with tinfoil to within about one
inch from the top. The outside of the tube should be coated in the same
manner for the same distance. The tinfoil can be secured to the glass
with shellac.

The top of the Leyden jars is closed with an ordinary cork. A piece of
heavy brass wire bent into the form of a hook should pass through the
cork and make connection with the tinfoil on the inside of the tube. One
Leyden Jar should be hung over each of the collector rods by means of
the hook. The tinfoil coatings on the outside of the jars should be
connected together by a piece of wire running across from one tube to
the other.

[Illustration: FIG. 12.—Details of the Discharger Rods.]

The machine is now complete and ready for performing a number of very
interesting experiments.

Experiments with Static Electrical Apparatus.

*A Leyden Jar* is a very simple device for accumulating and storing
static electricity. It consists simply of a wide mouthed jar or bottle
coated with tinfoil part way up on both the outside and the inside in
exactly the same manner as the small test tubes used on the static
machine.

Not all glass jars are suitable for making Leyden Jars. The quality of
the glass varies considerably and some will be found far superior to the
rest.

The glass vessels used by chemists and called "beaker glasses" usually
make excellent Leyden Jars.

It is not very difficult to make a good Leyden Jar. After you have
selected the jar or bottle you wish to use, clean and dry it very
thoroughly. Then give the inside a thorough brushing over with shellac.
Cut a strip of tinfoil which is long enough to go all the way around the
inside of the jar and about two-thirds its height. Before the shellac is
thoroughly dry but is still sticky, insert the tinfoil strip carefully
into the jar and press it smoothly against the glass.

[Illustration: FIG. 13.—The Supporting Bar upon which the Collector Rods
are mounted. Made of hard rubber so as to be a perfect Insulator.]

The outside of the jar should also be given a coat of shellac and
covered with tinfoil in exactly the same manner. The tinfoil on the
outside of the jar should be the same height as that on the inside. The
bottom of the jar should be coated, both inside and out by cutting two
circular pieces out of the tinfoil and sticking them on with shellac.

The jar should be provided with a wooden cover which will fit snugly
into the top. The wood should be dried and then given a coat of shellac
so that it cannot absorb any moisture.

[Illustration: FIG. 14.—The Neutralizers. Two are required. They are
bent out of Brass Rod and fitted with a Tinsel Tuft at each end. The
centre piece upon which the Rod is mounted should be of Hard Rubber.]

It may perhaps be well at this point to emphasize how highly important
it is to always keep all static electrical apparatus thoroughly dry and
to construct it so that it will not collect or absorb any moisture.

A small hole should be bored through the centre of the cover so as to
permit a brass rod to pass through. A piece of spring wire bent into a
spiral should be attached to the lower end of the rod. When the cover is
in position, the spring wire should make contact with the tinfoil on the
inside of the jar.

It is a very good idea to fit the top of the rod with a small brass
ball. This will prevent the electricity from "leaking" from the sharp
corners on the end of the rod. Static electricity leaks very easily from
sharp corners or points, but does not escape so readily from round
corners or balls.

[Illustration: FIG. 15.—Details of the Leyden Jars. They are simply
small Test Tubes, coated inside and outside with tinfoil for about
two-thirds their height and fitted with a Brass Rod connected with the
inside coating.]

The Leyden jar may be "charged" with electricity from the static machine
by connecting a wire from one of the discharge rods to the outside
tinfoil coating on the jar. Another wire should be connected from the
other discharge rod to the rod on the jar which connects with the inside
tinfoil coating.

Turning the handle of the machine rapidly for ten or fifteen seconds
will charge the jar. Disconnect the wires as promptly as possible so
that the electricity in the jar will not have a chance to leak back into
the machine. Be very careful while doing this, however, because if you
should happen to touch the tinfoil on the outside of the jar and the rod
which connects with the inside coating at the same time you will get one
of the surprises of your life.

[Illustration: FIG. 16.—A Large Leyden Jar for experimental purposes.]

The shock won’t really hurt you any but it will be very uncomfortable
and somewhat surprising.

You can discharge a Leyden jar by bringing a piece of wire which is
connected to the outside coating, near to the knob on the rod. When the
wire is close to the ball the electricity will jump across the space in
the shape of a snapping white spark.

The Leyden jar can be used in connection with a number of experiments
described later on.

[Illustration: FIG. 17.—Showing how to Discharge a Leyden Jar with a
curved piece of stiff wire fitted to a Wooden Handle.]

*Bottled Lightning.* A very pretty effect can be obtained by passing the
spark from a Leyden jar or a static machine over a "lightning board." A
"lightning board" consists of a pane of glass having a number of small
squares of tinfoil stuck on it so that when the electrical discharge is
passed over it, sparks take place between the little tinfoil squares and
produce an effect something like miniature lightning.

A lightning board suitable for the static machine just described may be
made from a strip of ordinary window glass about nine inches long and
two inches wide.

Clean the glass thoroughly and then give it a coat of shellac on one
side. As soon as the shellac becomes sticky, lay on a strip of tinfoil
the same size as the glass and rub it down smoothly. When the shellac
has thoroughly dried so that the tinfoil is stuck tightly to the glass,
the board is ready to be cut up into squares. This can be best
accomplished by means of a sharp knife and a ruler. Use care in doing
the work so as not to tear the tinfoil and be sure that the knife cuts
all the way through to the glass. Leave two solid strips of tinfoil at
each end to which to make connections.

[Illustration: FIG. 18.—The "Lightning Board" is simply a Strip of Glass
covered with small Tinfoil Squares. It may be insulated by mounting on a
Bottle. The two Wires attached to the wide Tinfoil Strips at the ends of
the "Board" are for connection to the Static Machine or Leyden Jar.]

The lightning board should be mounted by cementing it in a slot in a
cork in a bottle so that the glass bottle serves as an insulated
support.

If one of the tinfoil strips left solid at the end of the board is
connected to one of the discharge rods on the static machine and the
other end is connected likewise to the other discharge rod innumerable
little sparks will zig-zag between the tinfoil squares when the machine
is set in operation. The effect is quite pretty if the experiment is
performed in a dark room.

The Leyden jar can be charged by the static machine and discharged
through the lightning board. The sparks produced by the Leyden jar will
be much more brilliant than those of the static machine above.

A very pretty effect can be produced by arranging the tinfoil in the
form of a pattern or design as for example that illustrated in Figure
19. A strip of glass about the same size as that used for the lightning
board may be employed. The glass is coated with shellac and as soon as
it becomes sticky, small rectangular pieces of tinfoil arranged in a
zig-zag pattern and having small spaces between them, are stuck in
position. The end pieces are made larger than the other strips so as to
afford means for connecting the wires. The strip should then be
insulated and mounted by cementing it in a slot in the cork of a glass
bottle.

[Illustration: FIG. 19.—A very pretty effect can be produced by
arranging small tinfoil strips on the Glass in a Pattern. Each strip
should be separated from the other just far enough for a Spark to pass.]

The apparatus shown in Figure 20 is made according to the same plan but
the glass in this case is in the form of a square instead of a strip.
The tinfoil strips are arranged in the form of a seven pointed star or
any other pattern which may be desirable. The two large strips A and B
are the ones to which the wires should be connected.

*The Electric Parasol* is illustrated in Figure 21. It is made by
pasting some narrow strips of tissue paper, about three-sixteenths of an
inch wide and three or four inches long, to a small cork which has
previously been covered with tinfoil. The strips can be made most easily
by cutting a small sheet of tissue paper into strips like the teeth of a
comb as shown in the upper right hand corner of Figure 21. The tinfoil
covered cork should be mounted on the upper end of a stiff copper or
brass wire supported in a bottle.

If this wire is then connected to one of the discharge rods on the
static machine and the hand held to the other, the paper strips will
spread out like a parasol or umbrella, as soon as the machine is set in
operation.

[Illustration: FIG. 20.—A very pretty design made by arranging the
Strips in the form of a Seven-pointed Star. Flowers, initials or almost
any pattern may be made in the same way.]

A novel experiment somewhat similar in principle to the "electric
parasol" is that shown in Figure 22.

Three small paper birds about the size of that shown at the right hand
side of the illustration should be cut out of tissue paper and each one
attached to a piece of cotton thread about six inches long. The threads
are then tied to one end of a T-shaped frame bent out of copper wire and
supported on a bottle.

If the wire frame is then connected to one of the discharge rods and the
hand held to the other while the machine is set in operation, the birds
will rise in the air and fly around as far as the threads will let them.

[Illustration: FIG. 21.—The Electric Parasol. The upper right-hand
corner shows a piece of Tissue Paper cut into Strips. (1) Is the
apparatus before the Tissue Paper is fastened to the Cork. (2) Shows the
completed "Parasol" and (3), the Parasol when connected to the machine
and the latter is set in operation.]

*Electric Acrobats.* The apparatus shown in Figure 23 consists of a
circular metal plate about four inches in diameter suspended by a wire
from a wire "T" stuck in a cork in a bottle. Another circular metal
plate of the same size is laid on the table below the other. The
distance between the two plates should be about one inch or an inch and
one-half.

Cut three or four little figures, the same size as that shown in the
upper right hand part of the illustration, out of tissue paper and lay
them on the bottom plate.

[Illustration: FIG. 22.—Electric Birds. The Birds are made of Tissue
Paper and should be about the size and shape shown in the lower
right-hand corner of the illustration above.]

The circular metal plates may be made of sheet tin, copper, brass or
galvanized iron. Even cardboard, provided that it is covered with
tinfoil, will serve.

The upper plate should be connected to one discharge rod on the static
machine and the lower plate to the other. Then as soon as the machine is
set in operation the little paper figures will begin to dance up and
down, stand on their heads, hang by one foot or hand, turn somersaults
and perform all sorts of stunts.

*Gunpowder* may be ignited by the spark from a Leyden jar. A miniature
mortar may be made from a piece of broom handle about an inch and
one-half in diameter with a hole one inch deep in one end as shown by C
Figure 24. The mortar should be fastened to a small wooden base which
will support it in an inclined position as in the illustration.

[Illustration: FIG. 23.—Electric Acrobats. The Acrobats are made of
paper. The little figure in the upper right-hand part of the
illustration is the proper size.]

Bore two small holes through the wall of the mortar, near the bottom and
exactly opposite to each other Insert two short pieces of coper wire, W,
W, in the holes and fasten them tightly in position. The ends of the
wires should be about one-eighth of an inch apart.

A small pinch of gunpowder is then placed in the bottom of the mortar.

Charge the Leyden jar and then discharge it through the mortar by
connecting it to the two wires W, W. As soon as the spark passes, the
powder will explode. An experiment such as this should be performed
cautiously and the face and hands should be kept away from the powder.
Do not put more than a pinch of powder in the mortar at a time and by
all means keep the reserve supply out of the way so that there will be
no danger of exploding it by accident.

*An Electric Whirligig* is an interesting piece of apparatus which may
be built by following the suggestions contained in Figure 25.

[Illustration: FIG. 24.—The Electric Mortar. C is the Mortar, P the
Powder, B a Small Ball and W W the two Wires between which the Spark
igniting the powder takes place.]

Mount four pieces of dowel about three inches long at the corners of a
wooden base about eight inches long and two inches wide so that they
form four vertical posts as shown by A, B, C, D.

The dowels, as well as the wooden base should be carefully dried and
shellaced so that they will not absorb any moisture.

Stretch two pieces of straight stiff wire between the posts A C and B D,
near the top. The wires should be perfectly straight and level.

The whirligig itself is made by passing a sewing needle through the axis
of a small cork. Four small wires having the ends bent over at right
angles should then be stuck in the cork as shown in the upper left hand
part of Figure 25. All of the wires should point in the same direction.

[Illustration: FIG. 25.—An Electric Whirligig.]

The four wires should all be the same length so that the whirligig is
perfectly balanced. The cork is then covered with tinfoil so that there
will be an electrical connection between the four small wires and the
needle forming the shaft.

The two wires A C and B D are connected together by a wire A B and a
piece of flexible wire led to the Wimshurst machine. The opposite side
of the Wimshurst machine is then grounded or touched with the hand. If
the whirligig is laid on the wires A C and B D as shown in the
illustration and it is perfectly balanced it will commence to revolve
and roll along the wires just as soon as the Wimshurst machine is set in
operation. It is the escape of the electricity from the points of the
four wires on the whirligig which causes this.

Other interesting experiments in static electricity may be performed
with the aid of a Wimshurst machine and the experimenter who is
sufficiently interested to continue farther is referred to any good book
on physics or some such volume as "The Boy Electrician".

CHAPTER II. CELLS AND BATTERIES.

Sources of Current. One of the chief difficulties of the average young
experimenter is to secure a satisfactory source of current for operating
his apparatus.

There are three means at his disposal and he may draw his electricity
from

1. A power or lighting circuit;
2. A dynamo;
3. Batteries.

[Illustration: FIG. 26.—A Voltaic Cell. A Voltaic Cell consists of a
Strip of Copper and a Strip of Zinc immersed in a dilute solution of
Sulphuric Acid.]

Only those who are so fortunate as to live in a house wired for light
and power service and supplied from the street mains, are likely to be
able to utilize the first named. Those experimenters who live in towns
where there are no commercial power wires or whose homes are not wired
for such service will have to therefore depend upon a dynamo or a
battery.

A dynamo is a very satisfactory source of current, provided some sort of
power, such as a windmill, water motor or small engine is available for
driving it. A hand dynamo is unsatisfactory for some purposes because
the experimenter is usually unable to drive the dynamo and attend to
other work at the same time.

Batteries are the most expensive source of current but for many reasons,
as explained above, are all that is available to the average
experimenter.

There are two classes of batteries, known as

1. Primary batteries;
2. Secondary or storage batteries.

*Primary Batteries* are those which generate their own current by the
action of some chemical such as, for example, an acid upon a metal.

*Secondary Batteries* derive their current from a dynamo or other source
of electricity and store it away in the form of *Chemical energy* until
it is used up. A storage battery might be likened to a pail, which can
be carried to a dynamo and filled full of electricity. Those who possess
a storage battery can recharge it themselves from the 110-volt lighting
or power circuit, from a dynamo or by taking it to an automobile garage
where recharging is done.

Homemade batteries are not as practical as those which can be purchased
ready made, but the knowledge and experience gained in making your own
are so valuable that every experimenter is urged to start in this way.

Various materials such as zinc, copper, carbon, etc., can be used to
make some very interesting and valuable batteries.

One of the most common mistakes made in reference to cells and batters
is in calling a single cell a *battery*. One cell is a cell. More than
one cell connected together is a *battery of cells* or simply a
*battery*.

The Voltaic Cell.

The first practical cell was invented in 1786 by an Italian professor
named Volta and it is, therefore usually called the Voltaic cell.

A Voltaic cell may be easily made by the experimenter, by placing some
water, mixed with sulphuric acid, in a glass tumbler or a jelly jar and
then immersing therein a strip of zinc and a strip of copper, each about
four inches long and one inch wide. The strips must be kept separate
from one another and should be scraped clean and bright before they are
placed in the solution. A copper wire is fastened to the top of each one
of the strips. The acid solution should be composed of one part of acid,
mixed with ten parts of water.

When mixing acid and water, always remember to pour the acid into the
water and never pour water into acid. Otherwise the solution will
suddenly become very hot and is liable to crack the jar. Acid should
always be mixed in a glass or earthenware vessel and never in any sort
of a wooden or metal receptacle, because it will attack and dissolve
metals and wood.

As soon as the acid has been prepared for the Voltaic cell fill a
tumbler about three quarters full and then immerse the zinc and copper
strips therein. As soon as the strips are in the acid, bubbles will
commence to rise from the zinc. These bubbles are a gas called hydrogen
and are evidence of a chemical action which takes place in a battery.
The zinc is being dissolved by the acid and during the process, sets
free hydrogen gas.

It will probably be noticed that very few bubbles arise from the copper
plate and that there seems to be little chemical action there.

It will also be noticed that if the two wires connected to the strips
are brought together the bubbles will arise from the zinc much faster
than before. That is because, when the wires are connected together, a
complete electrical circuit is formed: The zinc is really being oxidized
or slowly burned. If zinc is burned in the open air or in a fire it will
give out its energy in the form of heat but when it is burned in an acid
solution in the presence of another metal it gives out its energy in the
form of electricity.

The zinc strip in a Voltaic battery is known as the *negative* pole or
cathode, and the copper strip, as the positive pole or anode. When the
electrical circuit is completed by touching the two wires connected to
the poles together, the current is supposed to flow from the positive
pole through the wires and back into the solution through the negative
pole.

If the two wires, instead of being connected together, are connected to
an electrical instrument called a voltmeter the needle or pointer on the
meter will swing over and point to about one volt.

*A Voltmeter* is an instrument for measuring electrical pressure or
*potential*. The pressure of an electric current is measured in *volts*
just as the pressure of water may be measured in *pounds*.

If the copper strip is lifted out of the solution and a carbon plate or
rod also having a wire attached is substituted in its place it will be
found that the voltage or potential has increased to one and one-half
volts. Zinc and carbon are said to have a greater potential difference
than zinc and copper and inasmuch as it is usually desirable for a
battery to have the greatest potential difference possible, zinc and
carbon are employed in the batteries of to-day instead of zinc and
copper.

If the wires are then disconnected from the voltmeter and connected to
an electrical instrument called an *ammeter*, the needle or pointer will
probably swing over until it indicates a current of perhaps ten amperes.
An *ammeter* is an instrument for measuring the volume of an electric
current. An *ampere* is a unit of current and is used to designate the
rate of flow just as feet per second are used to denote rate of flow in
the case of water in a pipe.

If the meter is allowed to remain connected to the cell for a short time
it will be noticed that the pointer will commence to slowly drop back
towards zero.

The cell is then becoming *polarized*, which is to say that small
bubbles of hydrogen which are liberated by the chemical action, collect
on the carbon and cause the strength of the battery to fall off. If the
battery is agitated or the carbon is lifted out and scraped it will be
found that the current will immediately rise again to its first
strength.

It would be a nuisance if it were continually necessary to scrape the
carbon or shake the battery so as to avoid *polarization* and so another
means is employed to secure the desired result.

This is accomplished by introducing certain chemicals into the solution
which will give forth *oxygen*. When oxygen and hydrogen meet under
proper conditions they combine and form ordinary *water*.

*Bichromate of potash* or as it is also often called *potassium
bichromate* is the chemical most commonly employed for this purpose.

[Illustration: FIG. 27.—Ordinary Jelly Glasses, Tumblers, Fruit Jars,
etc, make good Jars for small cells by cutting off the tops.]

Homemade Batteries.

*The materials* required for making batteries, suitable as a source of
current for the experimenter, will not be found expensive in most cases.

*Carbon rods* and *plates* may be purchased from an electrical supply
house but they can also be easily and cheaply obtained from old dry
cells. Dry cells may be split open with a cold chisel and a hammer. Care
should be exercised not to break the carbon in removing it.

The round carbon rods used in arc lamps may be used for making batteries
provided that if they are copper plated, the copper is first removed by
immersing the rod in a bath of nitric acid. If this precaution is not
taken there will be a "local action" set up between the copper and the
carbon and the battery will not be as efficient as it will be if the
copper is removed.

Carbon rods and plates are easily drilled with an ordinary hand drill.
Carbon is quite brittle and breaks easily, therefore only very light
pressure should be used.

While zinc rods and plates may also be purchased they are easily made by
the experimenter who possesses a little ingenuity. The melting point of
zinc is quite low. It can be melted in a small iron pot and cast into
the form of rods or plates in plaster-of-Paris moulds. Plates may also
be cut out of heavy sheet zinc.

[Illustration: FIG. 28.—A Simple Home-made Cell.]

Ordinary jelly-glasses, tumblers, fruit jars, etc., make good jars for
small cells. The tops of fruit jars and batteries can be cut off so as
to make the opening larger.

The cutting can be done with an ordinary glass cutter or by filling a
scratch completely around the jar or bottle, at the place it is desired
to cut it off, with a three cornered file. If a hot poker or wire is
then held against the scratch it will commence to crack along the line
and follow the hot poker as it is drawn around.

[Illustration: FIG. 29.—A Home-made Battery having two Carbon Plates
with a Zinc Rod between.]

Figure 28 shows a simple arrangement consisting of a carbon and a zinc
plate mounted upon a wooden strip. The strip is used to support the
plates and rests across the top of the jar so that the plates hang below
in the solution. Most chemicals attack wood and for that reason it is
well to dip the strip in some hot paraffin. The carbon and zinc plates
are fastened on opposite sides of the wooden strip by means of a round
headed screw and a washer. A wire lead should be placed under the washer
on each plate. If the screw and washer are then smeared with some hot
paraffin or vaseline they will be protected from corrosion.

Care should be used so that the two screws employed to fasten the plates
to the strip do not touch each other in the wood. If they should, the
battery will be "short circuited" and the current will flow through the
screws instead of the wires.

Figure 29 shows an arrangement consisting of two carbon plates mounted
upon a wooden strip. The zinc element consists of a rod set in a whole
in the strip between the two carbon plates.

It will be found that two carbon plates will form a better cell than one
with only one plate or rod.

The arrangement illustrated in Figure 30 shows two carbon rods and one
zinc rod clamped between two wooden strips. The zinc rod is placed in
the center and the carbons to either side.

[Illustration: FIG. 30.—The Elements for a Simple Home-made Cell
composed of two Carbon Rods and one Zinc Rod clamped between two Wooden
Strips.]

The wooden strips are cut away a bit at the points where they clamp the
rods so as to form sort of a groove into which the rods fit without
slipping or twisting. The strips are drawn together tightly at the ends
by two wood screws.

When more than one carbon rod or plate is used in a cell, the carbons
should all be connected together so as to form a single unit.

The drawing in Figure 30 shows a wire twisted around the carbons so as
to connect them together but it would be a far better connection if the
wire was clamped between the carbons and the wood so that it is held
firmly.

Four carbon rods may be utilized by following the suggestion shown by
the drawing in Figure 31.

This consists of a square piece of wood about 4 x 4 inches and one-half
of an inch thick.

[Illustration: FIG. 31.—Four Carbon Rods and one Zinc Rod arranged to
form the Elements of a Cell.]

A zinc rod is set in a hole in the center. Four carbon rods are set in a
circle around the zinc and held in place by screws. All the carbon rods
should be connected together. The wooden top not only serves to support
the carbon and zinc rods, but will also act as a cover for the cell and
prevent the solution from evaporating.

Battery Solutions or Electrolytes.

It has already been shown how cells become "polarized" when the solution
consists simply of sulphuric acid and water. An ordinary acid solution
also has the further disadvantage that the zinc element is continually
consumed by the acid when it is in the solution, regardless of whether
current is being drawn from the cell or not. It is of course consumed
more rapidly when the circuit is complete and current is flowing than
when it is not, but the action is still nevertheless sufficiently rapid
to entirely consume the zinc even in the latter case in a very short
time. If an ordinary acid solution is used therefore as the liquid or
*electrolyte*, as it is technically termed, it is always necessary to
lift the elements out of their solutions whenever the cells are not in
use. They should be lifted out and carefully washed so as to remove all
traces of acid.

[Illustration: FIG. 32.—A Battery of Three Cells arranged so that they
can all be lifted out of the solution at once.]

A milder chemical which does not attack the zinc so rapidly as an acid
is often used wherever a battery is to be employed for ringing bells,
operating sounders, telephoning, etc., and only a small amount is
required.

Sal-ammoniac or chloride of ammonium, as it is also called, is a good
chemical for this purpose. It is very cheap and only requires to be
dissolved in water. A good strong solution should be made and an element
consisting of several carbons and one zinc such as those shown in
Figures 29, 30 and 31 used.

Such a cell will give about 1.5 volts and 3 or 4 amperes. If the current
is drawn from the battery continuously or too rapidly, it will also
*polarize* and the current will begin to fall off. The advantage of a
sal-ammoniac cell is that the elements may be left in the solution when
the cell is not in use, without appreciable waste of the zinc.

A very powerful cell of the non-polarizing type capable of delivering a
heavy current and having an E. M. F. of two volts can be made by adding
some potassium bichromate to a sulphuric acid solution.

An electrolyte of this sort may be prepared by dissolving four ounces of
bichromate of potash in sixteen ounces of water. Add to this, four
ounces of sulphuric acid. The acid should be added slowly and the
solution stirred at the same time.

This solution will be found an excellent one to use with cells having
carbon and zinc elements. The current and voltage are much higher than
those of an ordinary acid solution.

This type of cell also has the disadvantage that the zincs waste away
rapidly when in the solution, regardless of whether current is being
drawn or not. This can be partly overcome by *amalgamating* the zincs
with mercury. In order to amalgamate your battery zincs, procure a
little *mercuric nitrate* from a druggist or chemical house. Dissolve
the mercuric nitrate in a small amount of water and then rub the zincs
with a wad of cotton or cloth which has been dipped in the mercuric
nitrate solution.

The arrangement shown in Figure 32 is a very convenient one to follow in
arranging a battery of three or more cells. The elements of three cells
are all mounted upon a strip of paraffined wood and connected in series.
The three battery jars are placed in a row so that each pair of elements
will dip into their proper jar when the strip is laid across the tops.

Such an arrangement is not only more compact than one having the
elements composing each cell mounted upon separate strips, but will be
found very convenient when an electrolyte composed of bichromate of
potash and acid is used, because all the elements may then be raised out
of the solutions at the same time.

It is possible to place the jars in a frame and arrange a windlass
fitted with a crank so that the elements may be easily raised or lowered
from and to the solution. Such an arrangement is called a "plunge
battery."

Connecting Cells.

Cells may be connected either in *series*, in *multiple*, or in
*series-multiple*, depending upon the number of cells to be used and the
amperage and voltage desired.

[Illustration: FIG. 33.—Showing how Cells are arranged when they are
connected in Series. The Voltage of Six Dry Cells connected in series as
above would be approximately 6 x 1.5 or 9 Volts.]

Cells are in series when they are connected with a wire leading from the
negative pole of one of the positive pole of another, so that the
current flows through each one in turn. Figure 33 shows six cells
connected in series. Cells are placed in series when voltage is the most
important factor. The total voltage of the battery is then equal to the
sum of the voltages of the cells. For example, the voltage of the
ordinary dry cell is about 1.5 and therefore if four dry cells are
connected in series the total voltage of the battery will be six. If six
dry cells are connected in series the voltage at the terminals will be
about nine.

When a heavy amperage is desired, cells are connected in multiple.
Figure 34 shows six cells connected in multiple. It will be noticed that
all the negative poles are connected together to form one terminal,
while all the positive poles form another. The amperage of the average
dry cell is about 20. The amperage of a battery of cells connected in
multiple is equal to the sum of the amperages of the separate cells. The
amperage of four cells connected in multiple will be about 80 and about
120 in the case of six cells.

[Illustration: FIG. 34.—Showing Six Dry Cells connected in Multiple. The
Voltage of such an arrangement would only be 1.5, but the Amperage
available would be six times that possible from Cells connected as in
Figure 33.]

The life of the average dry cell is about twenty ampere hours under
normal conditions. If however the cell is discharged at a high rate, say
for instance, five amperes, it will be found that the life is less than
twenty ampere hours. On the other hand, if the discharge rate is very
low, as for example, one-quarter of an ampere, the capacity of the cell
will be greater. In order to get the most economical service from a
battery it is therefore advisable to lighten the load as far as
possible, and cells are consequently often connected in
*series-multiple* with that result in view. In a case, for illustration,
where it might be desirable to secure a current 4 1/2 volts and five
amperes from dry cells, the series-multiple arrangement could be
recommended. Three dry cells connected in series will furnish 4 1/2
volts and five amperes, but by using two sets as in Figure 35, the load
is divided between them and each set will only have to furnish amperes
to the circuit. *Two sets of cells used in series-multiple will
therefore last more than twice as long as either set would alone.*

The series-multiple arrangement is recommended where cells are to be
used for operating toy trains, induction coils, motors, etc., as being
the most economical.

Always be sure to use large wire in connecting cells. Fine wire offers
considerable resistance to the electrical current and the full benefit
of the batteries cannot be secured when it is used.

[Illustration: FIG. 35.—Showing how to connect a Battery of Cells in
Series-Multiple.]

Use care to scrape all connections so that they are clean and bright.
Tighten the binding posts with a pair of pliers so that there is no
chance of their becoming loose.

Another wise precaution is to always arrange batteries so that there is
a small space between two cells and no likelihood of any of the wires or
binding posts coming into contact with one another so as to form a short
circuit.

After the connections have been carefully made a little vaseline smeared
over them will prevent corrosion.

[Illustration: FIG. 36.—Battery Connectors like that shown above can be
obtained for 1 1/2 cents each and will be found to be very handy.]

Storage or Secondary Cells.

Storage or secondary cells (also sometimes called accumulators), differs
from primary cells in that they will not give forth an electric current
until they have been *charged* by passing an electric current through
them.

[Illustration: FIG. 37.—A Simple Experimental Storage Battery consisting
of two Lead Plates immersed in Dilute Sulphuric Acid.]

The Storage Cell is therefore a very convenient means of taking electric
energy at one time or place and storing it up for future use. From this
it must not be implied that electricity is actually stored in such a
battery. The energy of the electric current is really changed into
chemical energy and this energy produces electricity when the cell is
again discharged.

The superiority of the storage cell over any other form of battery is
universally recognized. The dry cell has an E. M. F. of only 1.5 volts
and deteriorates rapidly with age. The E. M. F. of a storage cell is 2
volts, or 33 1/3 per cent higher. Storage cells will operate almost any
electrical device with increased power over any other form of battery. A
wireless set will send farther, lamps will turn steadier and a motor
will give more power.

[Illustration: FIG. 38.—Showing how to charge a Simple Storage Cell
composed of two Lead Plates immersed in Sulphuric Acid by connecting it
to two Bichromate of Potash Cells.]

If properly cared for, a storage cell will last indefinitely. It may be
recharged an unlimited number of times and is exactly as good as new
each time. A dry cell must be thrown away when discharged.

Storage cells are rated by their output in *Ampere Hours.* An *Ampere
Hour* is the amount of current represented by one ampere flowing for one
hour. A 10 ampere hour cell will give 2 amperes for five hours, 1 ampere
for 10 hours, 1/2 ampere for 20 hours, etc. The ampere hour capacity of
a cell divided by the amount of current being used will determine how
long that current can be drawn before recharging is necessary.

Storage cells may be recharged from any source of *direct* current, that
is, from the lighting circuit, in series with a lamp, from a small shunt
wound dynamo, from dry cells or other primary batteries, or from
alternating current by using a *Rectifier*.

An Experimental Storage Cell.

Storage cells consist of lead plates immersed in an electrolyte of
dilute sulphuric acid.

Cut two strips, one inch wide and five inches long, out of sheet lead
about one-eighth of an inch thick.

Attach a wire to each one of the plates and then immerse them in a jar
full of *electrolyte* composed of:

1. Ten parts of water.
2. One part of sulphuric acid.

Connect the wire leading from the plates to a voltmeter and you will
notice that the pointer will not move away from zero.

Disconnect the wires and mark one plate as the *positive*, by means of a
little cross; mark the other plate *negative*, with a straight line.

Connect two good bichromate cells in series and lead the positive
terminal to the lead plate marked with a cross. Connect the negative
pole of the battery to the other lead plate. Bubbles of gas will
immediately begin to arise from the lead plates. Let the batteries
remain connected for about five minutes and then remove them. If you
then connect the two lead plates to the voltmeter again you will find
that the needle now swings nearly to two volts.

You will also find that your storage cell, for the two lead plates are
now a storage cell, will also ring a bell or run a small motor for a few
seconds.

The two lead plates became *charged* when the current from the
bichromate cells was passed through them. This little experiment
illustrates the principle of the storage cell very well.

A storage cell made of lead plates in the manner just described would
not possess sufficient capacity to make it worth while as a practical
cell. It has been found that if instead of a solid flat plate, a
framework or grid is used, consisting of a set of bars crossing one
another at right angles, leaving spaces between, which are filled with a
paste made of lead oxides, there will be a considerable gain in the
capacity of the cell.

A Homemade Storage Cell.

The storage cell illustrated in the accompanying illustrations is very
simple to make and a battery of them capable of delivering six or eight
volts will prove a very convenient source of current for performing all
sorts of electrical experiments.

[Illustration: FIG. 39.—Showing how the Plates for a Storage Cell may be
made from Sheet Lead by boring it full of holes and filling with paste.]

The plates are cut from sheet lead from one-quarter to five-sixteenths
of an inch thick. The height and width will depend upon the size of the
jars used. There are several sizes of rectangular glass storage cell
jars on the market, and if the plates are made about three inches wide
and three and one-half inches high, they will fit the smallest size of
jar. A lug about one inch and one-half long and three-quarters of an
inch wide is left projecting at the top.

Three plates are used in each cell. Each cell will have an E. M. F. of
two volts when fully charged. In order therefore to have a battery
capable of delivering six volts, three cells will be necessary. Nine
plates will be required for three cells.

The body of the plates should then be drilled full of holes about
one-eighth of an inch in diameter as shown by B in Figure 39.

The plates are now ready for pasting. Select three of the plates and
mark them with a small cross. These are to be *positive* plates when
finished. The paste for these plates is made by mixing red lead with
diluted sulphuric acid. The paste should form a good stiff mixture. Lay
the three plates upon a smooth board and press the paste carefully into
the holes with a flat stick. They are then laid aside to dry and harden.

[Illustration: FIG. 40.—A set of three Plates composed of One Positive
and Three Negatives assembled to form a Cell.]

The six remaining plates are to be *negatives* when finished and they
are pasted in identically the same manner as the positives except that
the paste is made of a mixture of yellow lead and dilute sulphuric acid
instead of red lead.

A pasted plate is shown at the right in Figure 39.

Cut six rectangular pieces, three by three and one-half inches, of heavy
blotting paper or thin whitewood. The thin wood used in the construction
of fruit baskets may be used for this purpose. These rectangles are to
be used as "separators" between the plates.

[Illustration: FIG. 41.—Glass and Rubber Storage Cell Jars which are on
the market for the Electrical Experimenter and may be purchased very
reasonably.]

The plates should then be assembled in groups of three, as shown in
Figure 40. The positive plate is placed in the centre with a separator
on either side. Two negative plates are then placed on the outside. The
lugs on the negative plates should come opposite to each other. A square
lead block having a hole bored through the centre may be placed between
the two negative lugs. The lugs are then clamped together with a binding
post and a screw. The plates are held in a compact bundle by two heavy
rubber bands passing around them.

Each group of plates is then placed in its proper jar and the jar filled
full of a mixture composed of:

1. Four parts of water, and
2. One part of sulphuric acid.

The plates are now ready for forming.

The cells are connected in series by leading a wire from the negative of
one to the positive of another and so on.

The terminals of the battery are then connected to a steady source of
direct current of at least ten volts. The positive pole of the battery
should be connected to the positive of the current source and the
negative to the negative.

The source of current may be (1) the 110 volt D. C. supply in series
with a lamp bank as described in Chapter IV; (2) the 110 volt A. C.
supply after it has passed through a rectifier; (3) another battery, or
(4) a shunt wound dynamo.

[Illustration: FIG. 42.—An empty Storage Cell Grid and also a Pasted
Plate both of which are on the market for experimenters who wish to
build their own Cells.]

The current passed through the storage cells during the forming process
should be about one ampere for cells of the size described above. As
soon as the positive plates of the storage cells have changed to a dark
chocolate-brown color and the negatives to a gray-slate, disconnect the
storage battery from the source of current and proceed to use it just as
you would any ordinary battery. Use it until it is exhausted and then
connect to the charging current again, taking care to make certain that
the positive pole of the battery is connected to the positive pole of
the current source.

After the cells have been recharged and discharged in this manner about
ten times they will be completely "formed" and ready for permanent
service.

Complete directions for recharging storage cells and instructions for
their care and maintenance will be found further on.

The only objection to the storage cells just described is that the paste
is liable to fall out of the plates in time. The plates or "grids" as
they are called used in commercial storage cells are cast in elaborate
moulds which make it possible to overcome this difficulty. Such grids
cannot however be made by the experimenter.

Jars, pasted plates and empty grids may be purchased from well known
firms dealing in apparatus for the experimenter, and with their aid it
is possible to construct a very substantial and durable storage cell at
home.

The empty grids or fully formed plates may be purchased in the following
sizes:

─────────────────────────────────────────────────────────────────
Positive or Negative Plate, size 2 7/8 x 2 1/2
─────────────────────────────────────────────────────────────────
" 3 1/8 x 2 7/8
─────────────────────────────────────────────────────────────────
" 3 5/8 x 5 3/4
─────────────────────────────────────────────────────────────────
" 4 3/4 x 2 7/8
─────────────────────────────────────────────────────────────────
" 4 3/4 x 5 3/4
─────────────────────────────────────────────────────────────────

Glass jars will be found satisfactory for stationary batteries. Rubber
jars are however advisable for portable batteries. Jars of the following
sizes may be easily obtained:

──────────────────────────────────────────────────────────────────
Glass Jar, outside 3 3/4 x 4 x 1 1/2 inches
──────────────────────────────────────────────────────────────────
Glass Jar, outside 3 3/4 x 5 x 1 1/2 inches
──────────────────────────────────────────────────────────────────
Hard Rubber Jar, outside. 6 1/2 x 3 1/2 x 1 1/2 inches
──────────────────────────────────────────────────────────────────
Hard Rubber Jar, outside. 6 1/2 x 6 1/2 x 1 1/2 inches
──────────────────────────────────────────────────────────────────

If the empty grids are purchased, they should be pasted in the same
manner as those plates just described. An empty grid of this type is
shown in Figure 42. A pasted plate is shown along side of it.

The two negative plates in cells of this type are fastened together by
"burning" into a lug, The lugs for this purpose may also be purchased
and will be found inexpensive.

The long lugs on the negative plates are cut off so that they will only
just project through the rectangular holes in the "connecting lug" when
the latter is in place, as shown by A in Figure 43.

The plates are "burned" into the connecting lug by using a red hot
soldering iron to melt the lead until they flow together at those
points. This is a job requiring a little skill and the experimenter had
better practice burning some odd bits of lead together first so as to
avoid all possibility of spoiling his plates.

[Illustration: FIG. 43.—Two Negative Plates "burned" together and the
Connecting Lug used.]

The positive plate is placed in position, as shown in Figure 44.

Wooden separators of the same size as the plates are placed between the
plates and the whole strapped together with heavy rubber bands near the
top and bottom.

The cells are then placed in their jars and the latter poured full of
electrolyte, providing that the batteries are to be of the stationary or
open type.

If it is desirable that they be portable and arranged so that the acid
will not easily spill, it will be necessary to seal them at the top.

The sealing is accomplished by cutting a "cover" strip out of thin wood
which will slip down over the lugs into the jar so that it comes about
one-half an inch below the top. A small hole should be bored in the
centre of the cover strip to receive a short piece of hard rubber or
lead tubing, which will act as a vent and permit the gases formed during
charging to escape or the electrolyte to be emptied at will.

[Illustration: FIG. 44.—The Elements of a Storage Cell composed of two
Negative Plates and one Positive Plate in their proper position.]

The cover strip should fit into the jar tightly so that when the sealing
mixture is poured in it will not run down around the plates or into the
jar.

The top of the battery is then poured full of a molten compound of
asphaltum and pitch.

No attempt should be made to seal the batteries when they contain acid.
The inside of the jar should be clean and dry.

After the cells are sealed and filled with electrolyte they are ready
for either forming or charging, depending upon whether the empty grids
were purchased and pasted by the experimenter or the plates were bought
already pasted and formed.

If they require forming, they must be put through the same forming
process which has already been described.

The finished cells when sealed will appear like those shown in Figure
45, according to the sizes of plates and jars used.

[Illustration: FIG. 45.—Three different sizes of Storage Cells which may
be purchased ready made or built by the experimenter out of prepared
materials as explained.]

Recharging and Caring for Storage Cells.

Storage cells are especially affected by the usage given them. If they
are mistreated they will quickly go to pieces, whereas, on the other
hand if well treated they will last indefinitely.

It is important that the electrolyte used in the cells should always be
of the proper strength. The only accurate method of preparing the
electrolyte is with the aid of a *hydrometer*. A hydrometer is an
instrument for determining the specific gravity of solutions.

It is a little device which looks somewhat like a thermometer. It is
placed in the solution and allowed to float. There is a numbered scale
along the upper part of the hydrometer and the *specific gravity* or
strength of the solution is indicated on the scale by the point which is
level with the surface of the solution.

The normal specific gravity for a storage battery solution should be
about 1.250. The strength can be increased by adding more acid and
decreased by adding water.

Ordinary commercial or technical grades of sulphuric acid and ordinary
water are satisfactory for primary batteries, but the acid and water
used in making the electrolyte for storage cells must be *chemically
pure* if you wish to obtain good results and desire your batteries to
hold their charge while standing.

Storage cells can be recharged with DIRECT current only. A dynamo for
recharging storage cells must be SHUNT wound. The voltage of the
charging current must be greater than that of the storage cells. About
three volts of charging current will be required for each cell of the
storage battery. Cells may be connected in multiple when recharging so
as to bring the voltage of the cells below that of the charging current.
It will of course, however, take much longer to recharge cells connected
in multiple than the same cells connected in series, provided that the
amperage of the current is the same.

Storage cells must not be recharged too rapidly. It is better to
recharge them slowly rather than too rapidly. Two amperes is plenty for
small cells of 10-15 ampere hours capacity. Three amperes is sufficient
for cells of 15-25 ampere hours capacity. Five to six amperes is the
right charging rate for a 40 ampere hour battery and 8 amperes in the
case of a 60 ampere hour battery.

[Illustration: FIG. 46.—A Hydrometer for preparing and testing the Acid
Solution for Storage Batteries.]

Storage cells should never be allowed to stand discharged for any length
of time or the plates are liable to become hardened and "sulphated."
They turn white when they are sulphated. It will take a great deal of
charging and recharging to get them back in shape when once they get in
that condition.

Never short circuit a storage cell or discharge it too rapidly.

Whenever any great amount of sediment collects in the bottom of the
jars, pour out the acid solution and wash the cell out thoroughly with
some pure water.

The plates of a storage cell should always be raised up off the bottom
of the jar, so that any sediment which collects will fall below.

[Illustration: FIG. 47.—The proper way of Recharging Storage Cells from
the 110 Volts D. C. Supply in series with a set of Lamps.]

It is a very good plan to keep the terminals of a storage cell or
battery smeared with vaseline so that they will not become corroded.

You can tell when a storage cell or battery is fully recharged by the
color of the plates. The positives will in that case be a dark chocolate
brown and the negatives a light slate gray color.

A cell which is fully recharged will indicate 2 1/2 volts on a voltmeter
connected across its terminals while the charging current is still on.

CHAPTER III. HOW TO REDUCE THE 110 V. D.C. OR A.C. TO A LOWER VOLTAGE
FOR EXPERIMENTAL PURPOSES.

It is often desirable to operate experimental apparatus and other
electrical devices from the 110 volt lighting circuit. Such a circuit
may be either direct or alternating, commonly spoken of as D.C. and A.C.
The easiest method of reducing the voltage of the 110 volt circuit to a
value where it can be used in place of an ordinary battery is to use a
step-down transformer. A transformer will, however, operate only on
alternating current and it is impossible to use it on a direct current
circuit.

[Illustration: FIG. 48.—A Lamp Bank consisting of a Set of 110-Volt
Lamps connected Multiple and arranged to be placed in series with any
device it is desired to use on the 110-Volt Current.]

It is therefore necessary to secure the desired result by placing an
adjustable resistance in the circuit and the most practical method of
accomplishing this is to use a "lamp bank."

*A Lamp Bank* consists of a number of incandescent lamps arranged on a
board so that any desired number may be quickly included in or withdrawn
from the circuit.

Figure 48 illustrates such an arrangement. It consists of a number of
Edison sockets of the type known as "flat-base porcelain receptacles",
mounted in two rows upon a suitable baseboard. Six or ten receptacles
will usually prove sufficient for the ordinary lamp bank.

The lamps are connected in "series-multiple." The diagram in the upper
left hand corner of Figure 48 shows just how this is done. Four binding
posts should be mounted upon one end of the board and marked A, B, B and
C as shown. B and B are connected together, or to use an electrical
term, are "in common."

The 110 volt supply is connected to the posts B and C. If any electrical
device is then connected to A and B and a lamp placed in each one of the
receptacles, the lamps will be in series with the apparatus and lower
the voltage of the 110 volt circuit to a value where it may be used for
recharging storage cells, operating toy motors, electroplating, lighting
miniature lamps, running toy railways, etc.

110 volt carbon lamps should be used on a lamp bank operated on a 110
volt circuit. Carbon lamps consume more current than tungsten lamps and
it will therefore not be necessary to use as many. Each 16 c.p. 110 volt
lamp used will allow about one-half of an ampere to pass through the
circuit. Thirty-two candle power bulbs of the same voltage will pass
about one ampere, while an 8 c.p. bulb will only permit one-quarter of
an ampere to flow.

It is therefore very easy to regulate the amount of current flowing by
using lamps of different sizes and screwing them in or out of the
receptacles.

A lamp bank such as this may of course be used on either the 110 volt A.
C. or D. C. circuit.

CHAPTER IV. HOW AN ALTERNATING CURRENT MAY BE CHANGED INTO DIRECT
CURRENT BY MEANS OF AN ELECTROLYTIC RECTIFIER.

Oftentimes the only source of electrical energy for experimental work is
the 110 volt alternating current supply. This may be reduced to a
voltage suitable for operating small battery motors, trains, lamps,
etc., by means of a "lamp bank" resistance or a step-down transformer.

Direct current is *necessary* however in order to recharge storage
batteries and to operate many other devices. The electrolytic rectifier
is a device for changing alternating current into direct current and
will be found satisfactory for this purpose, provided too much is not
demanded of it. It is fairly efficient if used only to rectify small
amounts of current. It is not efficient when large amounts of currents
are passed through it and quickly becomes very hot in such a case.

An electrolytic rectifier consists of an electrode of iron or lead and
one of aluminum immersed in a solution of sodium phosphate.

[Illustration: FIG. 49.—A Single Cell of Electrolytic Rectifier.]

An ordinary glass battery jar may be used to hold the solution,
preferably one measuring 5 x 7 inches. The electrodes are supported by a
wooden cover which also serves to prevent the solution from evaporating.
The cover may be circular in form and simply rest on the top of the jar
or may have a groove turned on the underside so that it fits the rim of
the jar snugly.

It is a wise precaution to thoroughly saturate the cover with paraffin
by immersing it in a molten bath of that material. If the cover is
allowed to remain in the molten paraffin until all bubbles have ceased
to rise, the paraffin will thoroughly permeate the wood and protect it
from the action of the Chemical solution used in the rectifier.

[Illustration: FIG. 50.—An Electrode cut out of Sheet Metal. The top is
bent over at right angles and drilled so that it can be mounted on the
underside of the cover.]

As stated above, one electrode may be made of iron or lead. The other
should be aluminum. The electrode may be cut out of sheet metal and made
in the form of a strip about one and one-half inches wide and six inches
long. The top of each electrode is bent over at right angles and bored
with a small drill and an 8-32 brass machine screw is passed through the
hole and through the cover into the bottom of the binding post mounted
on the top of the cover, thereby serving not only to fasten the
electrode securely in place to the underside of the cover, but also to
establish connection between the electrode and the binding post itself.

Electrodes which are cut out of sheet metal possess the disadvantage
that they are not quite as efficient and will not last as long as
electrodes which are cast.

Cast electrodes are much heavier and far more efficient in many other
ways. They cannot be easily made by the young experimenter, but may be
procured from any one of several firms dealing in supplies for
experimenters.

The right hand sketch in Figure 52 shows how the electrodes should
appear when they are mounted in position on the underside of the cover.
They are placed about two and one-half inches to three inches apart.

The solution is formed by dissolving sodium-phosphate in water until a
"saturated solution" is formed, that is, until the water will not
dissolve any more. Sodium-phosphate dissolves rather slowly and it will
be necessary to stir the solution and crush the lumps which form with a
stick or glass rod.

Fill the jars nearly to the top and then place the electrodes into
position.

[Illustration: FIG 51.—A Cast Electrode will last much longer than one
cut from Sheet Metal. Cast Electrodes like that above are on the market
and can be purchased very reasonably.]

The action of the electrolytic rectifier, in changing alternating
current into direct current, is interesting and peculiar. The rectifier
acts much like a valve which opens one way and closes the other.

If a battery is connected to the electrodes of a rectifier, the positive
pole of the battery being connected to the lead or iron electrode and
the negative of the battery to the aluminum electrode of the rectifier,
the current from the battery will flow through the rectifier and nothing
unusual will happen. If, however, the poles are reversed so that the
positive pole is connected to the aluminum electrode, oxygen gas will
form on the aluminum. The action of the oxygen gas is to combine with
the aluminum and form a coating of *aluminum oxide* all over the
electrode. Aluminum oxide is an insulator and it therefore quickly forms
an insulating coating which shields the electrode from the solution and
stops the passage of the current. This action is almost instantaneous.

[Illustration: FIG. 52.—A completed single Cell Rectifier. The right
hand sketch shows how the Electrodes are mounted on the underside of the
cover.]

If the rectifier is connected to an alternating current supply it will
act just like a valve permitting the current to flow in one direction
but stopping it whenever the aluminum electrode is *positive*. The
resulting current is therefore, under proper conditions, an intermittent
current flowing only in one direction.

An alternating current may be represented by a wavy line drawn above and
below a straight line. Every time that the wavy line crosses the
straight line it represents an alternation or a reversal of the
direction in which the current flows.

[Illustration: FIG. 53.—A Diagram showing how a Rectifier cuts off
one-half of the Alternating Current Wave and changes it into Pulsating
Direct Current.]

The direct current from an electrolytic rectifier working under proper
conditions is practically one-half of the alternating current wave and
may be represented by the series of waves marked by "C" in the lower
part of the illustration in Figure 53.

It will be noticed that these lines do not cross the straight line and
the current therefore does not reverse but flows in one direction only.

When a single cell of rectifier is used on the 110 volt current supply,
it should be placed in series with a lamp bank or a step-down
transformer so that the current is reduced to lower voltage.

Figure 54 shows how to connect a storage cell in series with a single
cell of rectifier and a lamp bank so that the storage cell may be
recharged from the alternating current. A step-down transformer will be
found more efficient and not quite so wasteful of current as a lamp
bank. The rectifier and the storage cell are simply connected in series
with the secondary of the step-down transformer in order to secure this
result.

[Illustration: FIG. 54.—Circuit showing how a Single Cell of Rectifier
should be connected in series with a Lamp Bank to Recharge a Storage
Cell. A is the Aluminum Plate and L the Lead or Iron Plate.]

[Illustration: FIG. 55.—Diagram showing the Difference in Current after
it has been passed through a Single Cell or Rectifier and after passing
through a Four-Cell Rectifier.]

The negative pole of the storage cell must always be connected to the
aluminum electrode of the rectifier.

The series of little curved lines at the bottom of Figure 53 which
represent the alternating current after it has been changed into direct
current by the action of the rectifier, have a space between each two,
showing that there are periods during which no current flows but that
the current is intermittent and made up of a number of short impulses.
One-half of the alternating current is therefore really wasted.

It is possible, by means of four cells of rectifier, to so connect them
that "both halves of the alternating current wave are utilized" and the
spaces are filled up as shown in the lower part of Figure 55.

[Illustration: FIG. 56.—Diagram showing how a Four-Cell Rectifier is
connected. The Alternating Current Source is connected to C and D. The
Direct Current is taken off at A and B. The Electrodes marked A, A, A, A
are the Aluminum Electrodes. L, L, L, L may be Lead or Iron.]

The current which would normally be in a reverse direction, and
therefore below the straight line, has been completely reversed so that
it flows in the same direction as that above the line.

Figure 56 shows how to connect four cells of rectifier in order to
secure this result.

An electrolytic rectifier composed of cells approximately 5 x 7 inches,
as described, will not efficiently handle a current of over two to two
and one-half amperes. A four cell rectifier will operate to the best
advantage on a voltage over 50, and for that reason it is always best to
use a lamp bank or step-down transformer in connection with it.

When the solution in a rectifier becomes hot it will not operate as
efficiently as when cold. The solution becomes exhausted after a certain
amount of usage and requires renewal. This condition will be indicated
by the failure of the rectifier to operate properly. The old solution
should then be thrown away and the jars and electrodes washed and
cleaned thoroughly before the new solution is poured in.

[Illustration: FIG. 57—A Complete Four-Cell Rectifier connected together
and Mounted in a Tray.]

CHAPTER V. HOW TO BUILD A STEP-DOWN TRANSFORMER FOR REDUCING THE 110
VOLT A. C. FOR EXPERIMENTAL PURPOSES.

A Step-Down Transformer will reduce the 110 volt alternating current to
a low voltage. These low voltage currents are still alternating but will
operate almost all sorts of direct current apparatus with the exception
of permanent magnet type motors which are now practically obsolete.

A suitable step-down transformer may be used to operate electrical toys,
such as small fans, motors and miniature electric railway trains, ring
bells, light small lamps, operate spark coils, etc., in fact the
different uses are practically unlimited, depending only upon the
ingenuity of the experimenter.

[Illustration: FIG. 58.—Details of the two different Pieces of Sheet
Iron used in building up the Core. Sufficient of each piece are required
to form a pile of each three-quarters of an inch thick.]

A step-down transformer cannot be used to recharge storage cells or for
electro-plating unless the current is first passed through a rectifier.

A transformer is both in principle and construction really very simple.

It consists simply of two coils of wire wound around an iron core. One
coil consists of many turns of fine wire and is connected to the 110
volt alternating current. This coil is called the *primary*. The other
coil consists of a smaller number of turns of larger wire and is called
the *secondary*. The lower voltage currents are obtained from the
secondary.

The first step to take in making a transformer is to procure some sheet
iron of the sort used for making stove pipes. It is called stove pipe
iron.

This iron will have to be cut into a number of pieces like A and B in
Figure 58.

The exact shape and dimensions are most easily understood from the
illustration. A somewhat resembles a three-pronged fork, while B is
simply a strip 2 5/8 inches long and 1/2 inch wide.

[Illustration: FIG. 59.—The Method used in piling up the Strips to
Assemble the Core.]

A sufficient quantity of each piece will be required to make a pile
three-quarters of an inch thick when tightly compressed.

The best method of procedure is to lay out one piece like "A" very
accurately and then cut it out. Hammer it out perfectly flat and use it
as a pattern to lay out the other pieces with. The cutting can be done
with a pair of ordinary tin snips. The pieces should all be cut very
accurately and truly so that they will match when piled up. The rough
edges of the iron can be smoothed up with a file.

Figure 60 shows how the core should look when it is assembled. It should
form a rectangle three and three-quarters inches long and two and
five-eighths inches wide.

The method of piling up the *laminations*, as the pieces forming the
core are called, is illustrated in Figure 59. One of the strips B is
placed against the open end of A. The next set of strips is arranged in
the same manner except that the position is reversed so that the strip B
is at the opposite end of the pile. This method is continued, reversing
each alternate set of strips until the pile is complete as shown in
Figure 60. After the core has been assembled, examine it carefully and
make certain that none of the strips are of the wrong size so that some
protrude farther than others.

The next step in the work is to make the windings, The windings are each
made on a cardboard tube having an inside diameter of about 1 1/16
inches. The tubes may be made by rolling a strip of wrapping paper
around a piece of broom handle or some other round object of the proper
size. The edges of the tube should be glued so that it cannot unroll.

[Illustration: FIG. 60.—Assembly of the Core.]

The *secondary winding* is an inch and nine-sixteenths long and one and
thirteen-sixteenths of an inch in diameter.

It is composed of 120 turns of No. 17 B. S. gauge single cotton covered
wire wound in six layers.

A tap is led out at the end of the second layer.

The *primary* is one and nine-sixteenths inches in diameter and one and
one-sixteenth long. It is composed of 1040 turns of wire wound in 13
layers.

[Illustration: FIG. 61.—Details of the Primary and Secondary Windings.]

[Illustration: FIG. 62.—Showing the Core completely assembled with the
Primary and Secondary in position. P, P are the Primary Terminals. 1, 2
and 3 are the Secondary Terminals.]

The windings must be carefully made and every care taken to see that
they are properly insulated. It is a very good plan to insert a layer of
paper between each two layers of wire.

After the windings are finished they are ready to assemble on the core.
In order to put them in place, the core must be taken apart first. The
primary and secondary go along side of each other on the centre tongue
of the A strips.

The core is put together again with the windings in position by slipping
each alternate "A" strip through from the opposite direction so that
when it is all assembled the result is like that shown in Figure 62.

The transformer is now ready for mounting. The usual method of mounting
a step-down transformer is to place it in an iron box or case. This is
of course the best way because the windings and core are then protected.
The experimenter who wishes to go to the trouble of building an iron box
for his transformer will find it worth the time.

For the benefit of those however who may wish to mount the transformer
on a switchboard or as part of some apparatus, the scheme shown in
Figure 63 is suggested. The base consists simply of a rectangular piece
of hardwood which has been given a coat of shellac.

[Illustration: FIG. 63.—The Step-down Transformer mounted on a Wooden
Base.]

The transformer core rests on two wooden strips marked "S" and "S" in
the illustration. It is clamped to the base by two strips, "T" and "T,"
held in position by round head wood screws at each end.

The terminals of the primary winding are led to the two binding posts,
marked "P" "P." The secondary terminals are connected to three binding
posts, marked 1, 2 and 3.

The 110 volt A. C is connected to the primary posts P P by means of a
flexible wire and plug which can be screwed into the nearest lamp
socket.

The low voltage is secured from the binding posts 1, 2 and 3.

· Binding Posts 1 and 2 will give 2 volts
· Binding Posts 2 and 3 will give 8 volts
· Binding Posts 1 and 3 will give 12 volts

[Illustration: FIG. 64.—A detailed Drawing showing how the Sides of the
Case are formed by bending a long strip of Sheet Iron at four points.]

The drawings in Figures 64, 65 and 66 will be of assistance to those who
wish to enclose the transformer in an iron case instead of mounting it
on a board.

The case is made of sheet iron. The sides are composed of a strip of
sheet iron fifteen and seven-eighths inches long and two and
three-quarters inches wide. The strip should be bent at four points so
as to form a rectangular box, the sides of which are four and
three-sixteenth inches long and the front and back, three and
nine-sixteenths.

The ends of the strip should overlap about three-eighths of an inch and
be riveted or soldered.

The bottom may be fastened to the sides with a couple of rivets or by
soldering at one or two points.

The bottom and top of the case should both be the same. They are made
from a rectangular shaped piece of sheet iron four and seven-eighths
inches long and four and one-quarter inches wide.

A notch five-sixteenths of an inch square is cut out of each corner and
the sides and ends then folded down along the dotted lines as indicated
in Figure 65.

[Illustration: FIG. 65.—Details of the Top and Bottom of the Case.]

The transformer is laid in the case with a small block of wood under the
core at either side so as to raise the windings up off the bottom. The
secondary terminals are connected to binding posts marked 1, 2 and 3 in
Figure 66. These binding posts are mounted on insulating bushings which
pass through the holes marked No. 1, No. 2 and No. 3 in Figure 64. The
insulating bushings consist simply of fibre washers so that the binding
posts will not short circuit on the metal case.

One end of a piece of double conductor lamp cord is led through a hole
in the back of the case and soldered to the two primary coil terminals.
The other end of the lamp cord is connected to an attachment plug which
may be screwed into a lamp socket.

[Illustration: FIG. 66.—The completed Transformer.]

The transformer case is then poured full of molten coil wax so that the
space around the transformer is entirely filled. After the wax has
cooled, fasten the cover on and it is complete.

Arts and Science Series No. 8

Home-made

Electrical Apparatus

A Practical Handbook for Amateur

Experimenters

In Three Parts

*Volume II*

_Second Edition_

*BY*

*A. M. Powell*

PUBLISHED BY

COLE & MORGAN, Inc.

Publishers of the Arts and Science Series

P.O. BOX 473 CITY HALL STATION

NEW YORK, N. Y.

Printed in U. S. A.

COLE & MORGAN, Inc.

CHAPTER VI. ELECTRIC MEASURING INSTRUMENTS

Galvanometers, Ammeters, Voltmeters. How to Make a Galvanometer.

If several turns of wire are wrapped about a compass, and a current of
electricity sent through the coil, the compass needle will be deflected.
Such an instrument is called a *galvanometer* and may be used for
detecting very feeble currents.

Figure 67 shows a very simple form of galvanometer which may be made by
winding about fifty turns of No. 36 B. & S. Gauge single silk covered
wire around an ordinary pocket compass. The compass is set on a block of
wood and the wire wound around both the compass and the block. The
terminals of the wire are connected to two binding posts.

[Illustration: FIG. 67.—A Simple Galvanometer.]

A galvanoscope of this sort may also be used for a polarity indicator to
distinguish between positive and negative poles. Connect an ordinary dry
cell to the galvanometer and the needle will immediately swing to one
side or the other, depending upon which way the current flows. The
carbon of the dry cell is *positive* and the zinc is *negative*. Note
which way the needle swings, whether toward the binding post connected
to the positive pole or the one connected to the negative pole. It will
swing towards the corresponding pole when any other source of current is
connected to it and by knowing whether it points towards positive or
negative it is very easy to determine the polarity.

The Construction of Ammeters and Voltmeters.

The experimenter will find a voltmeter and an ammeter to be very useful
instruments about the workshop and laboratory. A *voltmeter* is an
instrument designed to measure electro-motive force or electrical
pressure. An instrument designed to measure rate of flow of current is
called an *ammeter*.

Ammeters and voltmeters are really, in principle, galvanometers, the
scales of which have been calibrated to read in amperes or volts, as the
case may be.

The little meters described below are very simple but quite sensitive.

[Illustration: FIG. 68.—Details of the Bobbin.]

The wooden bobbin which holds the wire is shown in Figure 68. The exact
dimensions are best understood from the illustration. The wood can be
easily secured from an old cigar box. In laying out the work, scratch
the lines on the wood with the point of a darning needle. Pencil lines
are too thick to permit of accuracy in small work. The bobbin should be
perfectly square and true when finished. Finish by rubbing with fine
sandpaper and then give it a coat of shellac. Two bobbins will be
required, one for the voltmeter and one for the ammeter. Do not use any
nails in putting the bobbins together. Use strong glue only.

The bobbin for the ammeter should be wound full of No. 14 B. & S. Gauge
double cotton covered magnet wire. The voltmeter requires much smaller
wire. No. 37 B. & S. Gauge single silk covered wire will serve the
purpose satisfactorily, but a finer size such as No. 38 or 40, is
better. Such fine sizes will probably, however, prove more difficult for
the experimenter to obtain. Sufficient wire should be used to fill the
bobbin up. The wire should be wound on carefully in smooth even layers.

A small hole should be bored in one of the flanges, through which to
pass the end of the wire when starting the first layer. About six inches
of wire should be left at both ends of the coils to make connection to
the terminals with. The whole winding should be given a coat of shellac
when finished.

[Illustration: FIG. 69.—Details of the Armature, Bearings and Pointer.]

The armature is a piece of soft steel, one and one-eighth inches long,
and one-quarter of an inch thick. A one-sixteenth inch hole is bored,
slightly above the centre of the armature, to receive the shaft. The
centre of gravity is thus thrown below the centre of mass and the
pointer attached to the armature will always return to zero if the
instrument is level. The shaft is a piece of one-sixteenth inch bessemer
steel rod, three-eighths of an inch long. The ends are filed to a sharp
point as shown in the upper pert of Fig. 69. A small hole is bored in
the top of the armature almost directly over the shaft as shown in Fig,
69 to receive the lower end of the pointer, which is a piece of No. 16
aluminum wire, three and one-quarter inches long. The other end of the
pointer should be flattened slightly by tapping with a hammer and then
filed into a shape resembling a spear head.

[Illustration: FIG. 70.—A complete Voltmeter having the Scale at the
top.]

After all the holes have been bored and before the shaft and the pointer
are in place, the armature must be tempered so that it will retain its
magnetism. In order to temper the armature, heat it to a bright red and
drop it immediately into a basin of strong salt water. It may then be
magnetized by rubbing one end against the pole of a strong magnet.

The bearings are formed by two 6-32 brass screws, one-half an inch long
and having a small hole in the end to accommodate the end of the shaft.
These screws pass through the upper flange of the bobbin from the
opposite sides. The holes in the flanges should be slightly smaller than
the outside of the screw so that the latter will fit snugly and "take
hold" as if the wood were threaded.

Figures 70 and 71 show two different methods of assembling and
completing the instruments. In one, the bobbin is mounted on the base
and the scale is at the top. In the other, this relation is just turned
abound and the bobbin is at the top and the scale at the bottom. In the
latter case the pointer must be attached to the bottom of the armature
instead of the top.

[Illustration: FIG. 71—An Ammeter so constructed that the Scale is at
the bottom.]

Figure 73 shows the shapes and dimensions of the wooden parts which
compose the case.

A glass front slides in two shallow grooves cut in the wooden sides,
one-eighth of an inch from the front. Glue and brass screws should be
used in putting the case together. Do not use iron or iron screws.

[Illustration: FIG. 72.—Showing how the Armature, Shaft and Pointer are
assembled for a Meter having the Scale at the bottom.]

The two binding posts connected to the terminals of the wire on the
bobbin should be mounted on the base. A small, round-headed brass screw,
long enough to pass all the way through the base will serve to level the
instrument and bring the pointer exactly at zero. If a little brass
strip is placed in the slot in the screw head and soldered there so as
to form what is known as a "winged screw", the adjustment may be made
with the fingers and without the aid of a screw driver.

The scale is formed on a piece of stiff white cardboard directly under
the pointer. The scale is supported by gluing it to two small wooden
blocks. The various values are marked on the scale with a pen and ink.
The glass front should therefore not be put in place until the
instrument has been calibrated.

To properly calibrate the meters, they must be compared with a suitable
standard.

The zero value on the meters is normally in the centre of the scale.
When a current is passed through the bobbins, the armature tends to
swing around at right angles. But since the armature is pivoted above
its centre of mass, the centre of gravity is displaced when it swings
and exerts a pull in opposition to that of the bobbin. The amount of
swing will be greater as the current is correspondingly stronger. The
pointer will swing either to the right or to the left, depending upon
the direction in which the current passes through the coil of wire on
the bobbin.

[Illustration: FIG. 73.—Details of the Wooden Parts which form the
Case.]

The zero point on the two instruments shown in the accompanying
illustration is at the extreme left of the scales. The pointers are bent
to the left so that the current may be passed through the meters in only
one direction and the scales will have a greater range of values.

In order to calibrate the ammeter, place it in series with a standard
ammeter having a calibrated scale which is known to be correct. A set of
strong batteries and a rheostat should be included in the circuit. The
arrangement is illustrated in Figure 74. The rheostat is adjusted so
that various current readings are obtained. The positions of the pointer
on the standard meter are carefully noted and corresponding graduations
made on the scale of the other meter for each value.

[Illustration: FIG. 74.—Showing how the Apparatus is arranged and
connected for calibrating the Ammeter.]

[Illustration: FIG. 75.—Showing how the Apparatus is arranged and
connected for calibrating the Voltmeter.]

In order to calibrate the voltmeter it must be compared to a standard
voltmeter. The voltmeters must be placed in parallel or shunt with each
other as shown in Figure 75.

A switch is connected to the battery so that the voltage of a varying
number of cells may be passed through the meters. In order to secure a
close adjustment of the voltage, a rheostat is placed across the battery
and switch so that it shunts the cells which are in circuit. By
adjusting both the rheostat and the switch, any voltage within the
maximum range of the battery may be secured.

After the meters have been calibrated and assembled, they are ready for
service and will form a very useful and valuable part of the
experimenter’s laboratory.

When using the meters remember that it is always necessary that the
ammeter shall be in series and the voltmeter in parallel or shunt with
the circuit.

CHAPTER VII. CURRENT CONTROL DEVICES.

How to Make a Pole Changing Switch or Current Reverses How to Reverse a
Small Motor.

The switch shown in Figure 76 is a very simple device which will be
found very handy for many purposes. It consists of two brass levers
mounted alongside of each other and connected together with an
insulating strip or yoke bearing a handle so that they can both be moved
together. The levers are pivoted at their back ends and provided with
binding posts marked B. P. and B. P. in the illustration. The front ends
of the levers swing over three switch contact points properly spaced so
that the levers touch the adjoining contacts at the same time. The
contacts are marked 1, 2, and 3.

[Illustration: FIG. 76.—A Pole changing Switch for reversing Small
Motors or the direction of an Electric Current.]

We will suppose that the experimenter has some device operated by a
battery and desires to arrange the apparatus so that he can quickly
reverse the terminals of the battery so as to send the current through
the device in either direction quickly and at will. The apparatus to be
operated should be connected to the two binding posts mounted on the
switch levers and marked B. P. and B. P. Connect the negative pole of
the battery to the contact marked 2 (the center one), and the positive
pole to both 1 and 3 (the outside ones). When the switch is thrown to
the right so that the levers rest on the contacts 2 and 3, the right
hand lever will be positive and the left hand one negative. When the
switch is thrown to the left so that the levers rest on 1 and 2, the
left hand lever will be positive and the right hand one negative. The
current has been reversed.

[Illustration: FIG. 77.—Top view of a small Battery Rheostat]

A switch such as this makes it possible to quickly reverse the running
direction of small motors. In order to accomplish this, connect the two
brushes on the motor to the two switch levers. Connect the contracts 1
and 3 (the two outside ones) together and lead the wire to one terminal
of the battery used for operating the motor. In case the motor is
operated by a generator or from the 110 volt current, connect the wire
to one terminal of the power source. The middle contact on the switch
(marked 2) should be connected to one end of the field winding on the
motor. The other end of the field winding should be connected to the
remaining battery terminal or power source.

Moving the switch back and forth will send the current through the
commutator in opposite directions and cause the motor to run in either
direction as desired.

How to Make a Small Battery Rheostat for Regulating the Speed of Small
Motors, Etc.

*A Rheostat* is a variable resistance for regulating the amount of
current flowing in a circuit. It is a very useful device about the
experimental laboratory. It may be used, for regulating the speed of
small motors, the amount of current flowing into a storage battery when
recharging, the brilliancy of a lamp, etc.

[Illustration: FIG. 78.—Details of the Rheostat Base. The lower part of
the illustration is a cross section.]

Figure 77 shows a form of small rheostat which may be easily built by
the experimenter. It consists of a coil of German silver resistance wire
wound around a fibre form and set in a groove in a wooden base. A brass
lever slides over the edge of the resistance coil so that the portion
included in the circuit may be increased or decreased easily at will.

The dimensions shown in the several drawings which follow are for a
rheostat having a resistance of approximately ten ohms and suitable for
general experimental work. It is possible to use the same plans and by
doubling the dimensions, make a rheostat which is much larger and may be
used to carry heavier currents or which possesses more resistance.

[Illustration: FIG. 79.—Looking at the Base from the bottom showing the
grooves in which the Wires are laid.]

The details of the wooden base are given in Figures 78 and 79. The
outside diameter of the base is four inches. It is five-eighths of an
inch thick. The lower 7 part of Figure 78 shows a cross section of the
base. The groove is three and one-eighth inches in diameter inside,
five-sixteenths of an inch thick and five thirty-seconds of an inch
wide. The hole in the centre of the base is to accommodate the shaft of
the switch lever, Two holes, seven-eighths of an inch apart are drilled
at the back of the base to accommodate the binding posts. The binding
posts’ holes and also the hole in the centre of the base for the shaft
are countersunk at the bottom as shown in Figure 79.

The fibre strip which supports the German silver resistance wire is
shown in Figure 80. It is eight inches long, three-eighths of an inch
wide and one-eighth of an inch thick.

If the experimenter has access to a lathe it is possible to wind the
wire on the fibre strip under tension with the aid of the screw feed so
that the wire will go on very tightly and with a small air space between
the turns. When a lathe is not available it will be necessary to groove
the top and bottom of the fibre strip with the aid of a three-cornered
file. The grooves should be evenly spaced and as close together as
possible. They serve to prevent the wire from slipping and the adjacent
turns becoming short circuited.

The wire used to wind the strip should be No. 24 B. & S. Gauge German
Silver wire and should be bare. Wind the wire tightly into the grooves
in the strip and fasten both ends by looping through a small hole bored
in the ends of the fibre for that purpose.

The fibre strip can be bent so that it will fill in the groove in the
wooden base by heating it in the flame of a bunsen burner. It should
not, of course, be heated too hot or the fibre will burn. Warm it
thoroughly and bend into a circle of the same diameter as the groove in
the base. Then force the strip into the groove with the two ends
opposite the two binding post holes. The strip should fit into the
groove tightly so that there is no danger of it shifting or slipping
out.

[Illustration: FIG. 80.—The German-silver Resistance Wire is wound
around a Fibre Strip.]

The details of the switch lever, knob and binding posts, are shown in
Figure 81. The lever is made of sheet brass cut into the shape shown and
is one and three-quarter inches long. The knob is similar to those used
on typewriters for turning the paper roller. It is fitted with a
threaded stem moulded into the head. These knobs may be obtained at
almost any supply house carrying goods for experimenters. The lever is
slipped over the stem and clamped tightly against the knob by a nut on
the under side. The end of the stem or shaft fits into the hole in the
centre of the wooden base. Slip a washer over the end and then thread on
a brass washer. Tighten the nut up until the end of the lever makes firm
contact with the resistance wire but is not so tight that it binds and
cannot be easily moved by turning the knob. When the right position for
the nut is found, solder it to the stem so that it cannot change its
adjustment.

[Illustration: FIG. 81.—The Lever, Knob, Binding Posts, etc.]

The completed rheostat is shown in Figure 82. The right hand terminal of
the German Silver wire is connected to the right hand binding post. The
other binding post is connected to the washer around the lever shaft on
the under side of the base. The wires should be laid in grooves cut in
the bottom of the base for that purpose.

Drive a brass headed upholsterer’s nail into the base near the left hand
terminal of the resistance so that when the lever is swung around in
that direction as far as it will go, the tack will raise the lever up
off the resistance wire and break the circuit completely. Two small
nails should be driven into the base in such a position that they will
limit the swing of the lever and prevent it from moving so far that it
passes over the ends of the resistance unit.

The rheostat may be connected in a circuit by attaching two wires to the
binding posts. It should be placed in series with any device which it is
desired to regulate. The carrying capacity is limited to two amperes
owing to the fact that a heavier current than this will cause the wire
to overheat. Turning the knob so that the lever moves towards the
upholsterer’s nail, which raises it up off the wire, increases the
amount of resistance in the circuit and cuts down the current, until the
lever slides up on the nail when the circuit is broken entirely. Moving
the knob in the other direction decreases the resistance and increases
the current until the lever has moved as far as it may, when the current
will be at a maximum.

[Illustration: FIG. 82.—The completed Rheostat.]

CHAPTER VIII. HOW TO MAKE A TELEGRAPH KEY AND SOUNDER AND INSTALL A
TELEGRAPH LINE.

The modern telegraph consists essentially of four things:

1. A battery which produces the electric current.
2. A wire to conduct the current from one point to another.
3. A key or switch for turning the current off and on.
4. An electro-magnetic receiving apparatus, which changes the
pulsations of the electric current into sounds.

[Illustration: FIG. 83.—Key Frame.]

Its operation is not, as many suppose, complicated and difficult to
understand, but is quite simple.

The key is really a form of switch and is simply a contrivance for
controlling the electric current. It consists of a steel lever, pivoted
in the centre, and provided with a rubber knob, which the operator
grasps lightly with the thumb and forefinger. When the lever is pressed
downwards, a platinum point on the under side is brought into contact
with another similar point set into a rubber bushing in the base of the
key, so that there is no electrical connection between the two points
unless the key is pressed down or "closed" as it is usually termed.

The receiving device, or "sounder," consists of two electro-magnets
mounted on a base under a flat strip or iron, called the armature, which
is attracted by the magnetism of the electro-magnets when a current
flows through them, and is withdrawn by a spring when no magnetism is
produced by the windings.

[Illustration: FIG. 84.—Sounder Frame.]

The armature is usually mounted on a strip of brass or aluminum called
the "lever". The lever strikes against an anvil and produces the clicks
which form the dots and dashes of the telegraph alphabet.

Every time the key is pressed, an electric current goes through the
line, causing the magnets to draw the armature downward and produce a
click. When the key lever is released, the current is shut off and the
lever flies up and clicks against the top of the anvil.

The time between the first and second clicks may be easily varied at
will, by changing the length of time that the key lever is held down.
Two clicks very close together, made by pressing the key and immediately
releasing it, are called a "dot". A "dash" is made by pressing the key
down and holding it down for a fraction of a second so that the interval
between the first and second clicks is about three times as long as that
between the clicks of a dot.

[Illustration: FIG. 85.—The Electro Magnets.]

Any boy can make a simple telegraph set quite easily. The only drawback
of such an apparatus, however, is that it is usually not practical for
long lines but may only be used for ticking messages from one room to
another.

It is equally possible for the young experimenter to make a perfectly
practical telegraph outfit which will operate over a line a mile long,
if he is willing to give the time and labor necessary to the work.

The telegraph set-described below is one which, because of its
simplicity, particularly lends itself to construction by the young
experimenter whose tools are rather limited.

In order to make a really practical telegraph outfit, it is almost
essential that the key and sounder frame be made out of cast iron so as
to give the instruments the requisite stiffness. It is easier to use
castings than to attempt to bend the parts out of metal.

In order to secure the proper castings it will be necessary to first
make a set of "patterns". This is not very difficult.

The key frame is shown in Figure 83 and the Sounder frame in Figure 84.
The patterns should be cut out of wood according to the exact shape and
dimensions shown in the illustrations. Omit all the holes, however,
because no holes should appear in the patterns but only in the finished
castings.

[Illustration: FIG. 86—The Sounder Armature.]

The patterns should be made perfectly smooth and be a good, clean job
throughout. After they are finished, give them each a coat of shellac
and they are ready for the foundry. Almost any iron foundry will make up
the castings if supplied with the patterns. If a number of experimenters
"chip in" and make up a set of patterns from which several sets of
castings are ordered at the same time, the cost will be very slight.

After the castings are secured, they should be cleaned up with a file
and drilled according to the illustration in Figures 83 and 84. Several
of the holes should be tapped to receive an 8-30 machine screw. Such
holes are marked in the illustrations.

The holes not marked "Tap" should be just large enough to allow an 8-32
screw to slip through.

[Illustration: FIG. 87.—Sounder Frame with Lever in Position.]

*The Electro-magnets* are illustrated in Figure 85. The magnet core is
made of a piece of 5-16 inch round iron rod an inch and a quarter long.
A fibre washer, three-quarters of an inch in diameter is fitted over
each end of the core. One end of the core is drilled and tapped to
receive an 8-32 screw.

The magnet bobbin, before winding is shown at the left of the
illustration and a finished magnet at the right. Two magnets are
required. They should both be wound in the same direction with No. 25
single cotton covered wire. The wire should be wound in smooth, even
layers and the terminals led out through two small holes in the fibre
heads.

*The Sounder Armature* is a piece of steel or iron rod, five-sixteenths
of an inch square and three and three-eighths inches long. It serves
both as the armature and the sounder lever. The exact location of the
holes is shown in Figure 86. The holes "h" and "i" should be tapped to
receive an 8-32 screw. The hole "j" should pass a screw of the same
size. This screw serves as the pivot for the armature. Figure 87 shows
how the sounder frame should appear when the lever is in position. The
screw A controls the distance which the armature moves on its upward
stroke. The screw B strikes the "anvil" on the downward stroke and
controls the distance between the armature and the electro-magnets.

[Illustration: FIG. 88.—Top View of Completed Instrument]

The armature is pushed upwards and held away from the magnets against
the screw A by a small spiral spring. The lower end of the spring sets
in the hole "C" in the sounder frame and the upper end rests against the
end of the screw C so that the tension of the spring can be regulated by
moving the screw up and down. The armature should be free to move up and
down on the pivot screw but should not move sideways.

*The Base* of the instrument is a rectangular piece of hardwood, four
and one-half inches long, three and three-quarter inches wide and
one-half inch thick. The sounder is mounted on the base in the position
shown in Figure 88, which is a top view of the complete instrument. Two
long 8-32 machine screws pass upwards through the wooden base, through
the holes "e" and "f" in the sounder frame and into the bottom of the
magnets, thus serving not only to hold the magnets in position but also
the sounder frame to the base.

[Illustration: FIG. 89.—Side View of Key.]

Figure 89 is a side view of the completed key. The key lever and the
circuit closing lever are illustrated in Figure 90. The lever is four
and three-eighths inches long and five-sixteenths of an inch wide. It
should be made from spring brass. The circuit closing lever is a strip
of brass of the same width. All the holes in both levers, with the
exception of the centre hole in the key lever should be large enough to
pass an 8-32 screw. The centre hole should be tapped to receive an 8-32
screw.

The key lever is fastened to the frame by means of a round headed 8-32
machine screw. The screw should be tightened so that the lever cannot
move from side to side. The circuit closing lever is pivoted to the back
end so that it can swing. The key lever should be fitted with a regular
key knob and the circuit closing lever with a small knob such as is
generally used for the purpose. Both of these styles of knobs can be
purchased from almost any electrical supply house.

The contact points are best made of silver. Silver makes a better
contact metal than almost anything else, with the exception of platinum.
If silver cannot be obtained a piece of large german-silver wire may be
used.

[Illustration: FIG. 90.—Key and Circuit Closing Levers.]

One contact is soldered to the under side of the key lever. The other
contact should be mounted on the head of a screw and pass through a hole
in the iron key frame and through the wooden base underneath. This lower
contact should be directly underneath the upper contact and be
thoroughly insulated from the base. Several thicknesses of well
shellaced paper will form a first class insulating medium. The length of
the contacts should be such that there is a distance of about 3-32 of an
inch between them when the lever is horizontal.

The circuit closing lever should make contact with a small strip of
spring brass under the lower contact point so that the contact is
connected to the frame of the key through the circuit closing lever when
the latter is "closed".

The adjustment screw on the key frame is used to regulate the upward
stroke of the key lever.

The adjustment screw on the key lever is used to regulate the spring
tension of the lever. The lower end rests against the top of a small
spiral spring made of brass wire.

[Illustration: FIG. 91.—American Morse Code.]

Connecting the outfit is a very simple mater. The two inside terminals
of the sounder magnets should be connected together. One of the outside
terminals is led to a binding post mounted on the back of the base. The
other terminal is connected to the lower key contact. The frame of the
key is connected to a second binding post at the back of the base. The
connecting wires should pass through small holes and along the under
side of the base.

The Morse Telegraph Code is shown in Figure 91.

A single dry cell will provide sufficient current for practising the
Code. The cell should be connected to the two binding posts and the
circuit closing lever should be kept open at all times or the battery
will become exhausted.

[Illustration: FIG. 92.—Circuit for Two Instruments.]

The number of batteries required on a long line will depend upon the
resistance of the line and cannot easily be pre-determined.

Figure 92 shows a circuit for connecting two instruments on a line. When
the double contact switch is on point A the batteries are out of
circuit. Throwing the switch on B puts the batteries into circuit. They
should be kept out of circuit when the stations are not in use. The
circuit closer at Station 1 must be kept closed when Station 2 is
telegraphing and vice versa.

CHAPTER IX. HOW TO MAKE AND INSTALL A TELEPHONE.

Not many years ago, the telephone was the wonder of the times just as
the aeroplane and the wireless are to-day. The original telephone
apparatus was an exceedingly crude and simple arrangement which has
gradually developed into a wonderful and complex system which makes it
possible to carry on a conversation with almost any other point in the
United States as easily as it is face to face.

[Illustration: FIG. 93.—The Wooden Back for the Telephone.]

Many of my young readers have undoubtedly already constructed a set of
telegraph instruments and rigged up a line with some nearby chum. Like
the telegraph, the principle of the telephone is that of a current of
electricity flowing over a line wire into a pair of electro-magnets, and
it is not any more difficult to install a short telephone line than a
telegraph. Of course there are many important differences between a
telephone and a telegraph but they are not intricate or complex.

The telephone is exceedingly sensitive when compared to the telegraph.
An ordinary telegraph relay requires about one hundredth of an ampere to
operate it, whereas a telephone receiver will produce an audible sound
on a current of less than one millionth of an ampere.

[Illustration: FIG. 94.—The Complete Telephone.]

The telephone may be defined as an apparatus for transmitting speech to
a distance by means of electricity. The part of the apparatus which
takes up the sounds and changes them into electric currents is the
transmitter. Where words are spoken into the mouth-piece of the
transmitter, they strike a thin metal diaphragm, to the back of which is
fastened a small cup-shaped piece of carbon. A second cup is mounted in
a rigid position directly back of the first and the space between is
filled with small polished granules of carbon. When the granules are
undisturbed and are lying loosely together their resistance to an
electric current is so great that they allow almost none to flow.

When the vibrations of the voice strike the diaphragm they move it back
and forth and cause the carbon cup mounted on its back to move and exert
a varying pressure on the granules. When the granules are compressed
their resistance is greatly lowered and they permit current to pass.

That part of the apparatus which transforms the pulsating current back
into sound waves is called the receiver. It consists of a thin iron
disk, placed very near but not quite touching the end of a small
permanent magnet about which is wound a coil of fine insulated wire.

[Illustration: FIG. 95.—Details of the Receiver Hook.]

If the transmitter and receiver are connected together in series with a
battery and words are spoken into the transmitter, the little carbon
granules are immediately thrown into motion, and being alternately
compressed and released cause corresponding changes in the current
flowing through the receiver from the battery.

The strength of the magnetic pull exerted by the combined permanent
magnet and coil of wire varies with each change in the electric current
and thus by alternately attracting and repelling the diaphragm causes it
to vibrate and emit sounds.

This is the general principle of the telephone. The telephones in actual
service to-day are complicated with bells, induction coils, condensers
and relays, which render them more efficient, but the general principle
of the transmission of the speech is the same.

I would not advise the young experimenter to attempt to build his own
transmitter and receiver except for the knowledge and experience gained
thereby. Homemade instruments of this sort are not likely to prove
sensitive enough for practical purposes over a long line.

A first class telephone receiver can be purchased for 90 cents and an
equally good transmitter for $2.25 These, together with an ordinary
electric bell can be built into a first class telephone instrument which
will give excellent service over a long line.

[Illustration: FIG. 96.—Showing how the Push Button is arranged.]

Any boys can easily build and install such an arrangement. When
completed it will prove invaluable as a source of communication from one
part of the house to another, from the house to the barn or between two
chums living in the same neighborhood. Figure 93 shows the wooden back
of the instrument. It is made from a piece of board 12 inches long and 7
inches wide, by cutting into the shape shown. This back serves to mount
the transmitter, receiver, bell, etc.

*The Bell* is for the purpose of giving an audible signal so that the
person hearing it will know that some one at the other end of the line
wishes, to talk.

Figure 94 is a front view of the completed instrument. The bell is
mounted on the upper part of the back as shown in the illustration.

*The Receiver Hook* is shown in detail in Figure 95. It should be cut
out of heavy sheet brass and finished in the shape shown.

The receiver hook is mounted directly under the bell as shown in Figure
94. The hook should project out to the left beyond the edge of the back.
The hook is mounted by a round headed brass screw passing through the
hole in the right hand end.

[Illustration: FIG. 97.—Circuit showing how to connect two Telephone
Stations to the Line.]

The hook should move freely up and down between two contacts (marked 1
and 2 in Figure 94). These contacts are simply two small brass strips
bent at right angles and fastened about an inch apart along the left
hand edge of the wooden back by means of two small round headed brass
wood screws. The position of the contacts should be such that the hook
is in a horizontal position when it is half way between the two. A small
spring is arranged so as to pull the hook up against the upper contact
(No. 1) when the receiver is lifted off. When the receiver is hung on
the hook, it should overcome the lift of the spring and pull the hook
down against the lower contact (No. 2).

*The Receiver* may be purchased at almost any reliable electrical supply
house. It should be provided with a ring so that it can be hung onto the
hook.

*The Transmitter* is preferably of the "solid back" long distance type.
It also can be purchased ready made from almost any electrical supply
house.

The transmitter is mounted on the wooden back directly under the hook.
It is marked T in Figure 94.

*A Push Button*, made out of two round headed brass wood screws and a
strip of spring brass as shown in Figure 96, is mounted to the right of
the transmitter.

One end of the spring is fastened down firmly with a screw, the other
end is bent so that it is directly over but does not touch the second
screw mounted about seven-eighths of an inch away.

Four binding posts should be arranged along the bottom of the wooden
back and two more just to the left of the transmitter.

The set is now ready to "wire" or connect. The connections can be
understood best by following the diagrams in Figures 94 and 97.

Starting with the four binding posts along the bottom of the back, mark
the left hand one B1, mark the next one B2, the third E and the fourth
L.

Connect a wire from binding post B1 to the post P1 directly above it.
Run the wire from P1 to the brass strip on the push button. Connect
binding posts B2 and E together and from E run a wire to the right hand
binding post on the bell. Connect a wire from the left hand post on the
bell to the lower contact 2. The hook should be connected to binding
post L. The upper contact 1 is connected to one terminal of the
transmitter. The other terminal of the transmitter goes to binding post
P2. The telephone receiver should be connected to the posts P1 and P2 by
means, of flexible wire. The contact on the push button should be
connected to the upper hook contact 1.

The set is now complete, ready to connect to a similar outfit.

The battery is connected to the binding posts marked B1 and B2. E and L
are the line posts to which the wires connecting the two sets are led.

The wire connecting the two outfits should not be smaller than No. 18 B.
& S. gauge. No. 14 will prove better if the line is a long one.

The wire should be very carefully insulated. Ordinary porcelain knobs
will serve as suitable insulators.

If desirable, only one wire need be used, the circuit being completed by
connecting the post E on each instrument to the ground or earth. The gas
or water pipes will form the most suitable ground connection.

The number of batteries required will depend upon the length of the
line. The actual number necessary to ring the bell properly can be best
ascertained by experiment. It should be noticed that the battery
connections at each station are reversed so that the batteries will be
series. The negative of the battery at one station is connected to E and
the positive pole of the other battery at the other station to the
similar post.

When the stations are not in use the receivers should be left hanging on
the hooks. In order to call the other station, lift the receiver off the
hook. This throws the transmitter, receiver and battery into the
circuit. The resistance of the receiver and transmitter, however, are so
great that they will prevent enough current from flowing to ring the
bell at the other station. Pressing the push button will short circuit
the transmitter and receiver and allow enough current to flow to ring
the bell at the other station. The other person has merely to lift up
his receiver in order that the two parties may talk back and forth.

When the receivers are on the hooks both bells are in circuit ready for
either party to call up.

CHAPTER X. MEDICAL COILS AND SHOCKING COILS.

Medical coils and "shocking coils" are the same. The term "shocking
coil" is usually applied to the low priced medical coils which most boys
are familiar with for giving "shocks".

[Illustration: FIG. 98.—Bobbin for Medical Coil.]

A medical coil is nothing more or less than a small induction coil for
raising the voltage of a battery high enough to produce a shock. The
human body possesses so much resistance that the voltage of one or two
cells of ordinary battery is not sufficient to pass enough current
through to be felt except under exceptional conditions, as for instance
when contact is made directly with a nerve through an open cut or a
metal filling in a tooth.

A small lathe will be of much assistance in making some of the parts and
fittings for the medical coil, although it is not absolutely essential
and the ingenious young experimenter can undoubtedly find some method of
doing without it. It is not necessary to follow the dimensions given
here exactly, and a very good coil can be built by adapting spools,
binding posts, etc., which may already be on hand, although, of course,
they should be used with some sense of proportion in mind so that
nothing is carried to an extreme.

The first part which will be required is the bobbin. This is shown in
Fig. 98 and consists of a wooden spool, two and seven-sixteenth inches
long and one inch in diameter. It has a three-eighths inch hole running
all the way through the center. The dimensions of the flanges, etc., can
probably be best understood by referring directly to the illustration.
The flanges are flattened slightly on one side so that when the bobbin
is mounted the flat portion will rest on the base and give a better
support.

[Illustration: FIG. 99.—Bobbin with Winding.]

*The Primary Winding* consists of two layers of No. 24 B. & S. Gauge
single cotton covered wire. The terminals of the winding should be led
out through two small holes in the right hand head of the bobbin. Cover
the winding with two or three layers of thin shellaced paper and then
wind on the secondary. The secondary is composed of ten layers of No. 36
B. & S. Gauge single cotton covered wire. The inside end of the
secondary should be connected to the outside end of the primary. The
outside terminal is led out through a small hole in the head at the
opposite end from the primary leads.

The wire on both the primary and secondary should be wound on in smooth
even layers. The illustration in Figure 99 shows the bobbin after the
windings are finished.

*The Core* is made out of thin sheet iron rolled up into a cylinder two
and three-sixteenths inches long and nine-thirty-seconds inches in
diameter. The core should be rolled up just as tightly as possibly,
because the more iron there is in the core, within of course reasonable
limit, the better the coil will work. Thin tin plated iron cut from a
cracker box may be used for the core. The thinner it is the better. A
core of this sort, rolled up out of sheet iron will give much better
results than a core composed of a solid bar of iron.

[Illustration: FIG. 100.—Construction of the Core.]

The end of the core is slipped into an iron "core" cap. This is shown in
Figure 101. It consists of a small cylinder, seven-sixteenths of an inch
in length, cut from a piece of iron rod, three-eighths of an inch in
diameter. A hole nine-thirty-seconds of an inch in diameter and
five-sixteenths of an inch deep should be drilled in one end. This cap
is slipped over one end of the core. It should fit very tightly so that
it will not pull out.

The core is then slipped into the bobbin with the outside end of the
core cap projecting about one-sixteenth of an inch out of the end at
which the primary terminals lead out. The cap should fit into the bobbin
very snugly so that the core is held firmly in place.

Since the hole through the bobbin is three-eighths of an inch in
diameter and the core is only nine-thirty-seconds of an inch in diameter
there should be a space all around the core, except at the end where the
cap is, so that a thin brass "regulator" tube can be slipped in and out
over the tube.

[Illustration: FIG. 101.—Vibrator Parts and Core Cap.]

*The Regulator Tube* should be two and seven-sixteenths inches long and
have an inside diameter of five-sixteenths of an inch. In case the
experimenter has any difficulty in securing a tube of this size he can
easily make one by rolling a piece of sheet brass around a suitable
sized rod and soldering the edges.

When the tube is slipped over the core and moved in and out of the
bobbin, after the coil has been finished and set in operation, it will
regulate the strength of the secondary or "shocking" current. When the
tube is completely out of the bobbin, the current will be the strongest.

If a paper scale, divided into sixteenths of an inch and bearing
numbers, is pasted around the tube it will act as an indicator of the
current strength.

The base is wood and measures four and five-eighths inches long, two and
three-quarters inches wide and is one-half an inch thick. The proper
location of the various holes can be found by referring to the
illustration in Figure 103. The corners of the base should be slightly
rounded so as to improve the appearance.

Figure 104 is a top view of the coil after it has been assembled. The
bobbin is mounted a little back of the centre of the base so that the
core cap will be opposite the armature of the vibrator.

[Illustration: FIG. 102.—Regulator Tube.]

*The Vibrator Parts* are illustrated in Figures 101 and 106.

The vibrator spring is a piece of thin steel or phosphor bronze,
one-quarter of an inch wide and one and three-sixteenths inches long. A
soft iron armature, five-sixteenths of an inch in diameter and
one-eighth of an inch thick is fastened to one end of the spring. A
five-thirty-seconds inch hole is drilled in the other end and it is then
mounted in the "vibrator posts". This consists of a small brass pillar,
one-quarter of an inch in diameter and five-eighths of an inch long. The
lower end is drilled, and tapped to receive a 4-36 screw which fastens
it to the base. A saw slot one-quarter of an inch deep is made in the
top to receive the vibrator spring.

The post which holds the adjustment screw is identical with that which
supports the vibrator spring, except that a threaded hole is drilled
through the saw slot, fifteen-thirty-seconds of an inch from the bottom,
through which the screw passes. The end of the adjustment screw, which
may be an ordinary knurled thumbscrew from a binding post, should be
fitted with a "contact" point. The best contact point is a piece of
platinum, but a small piece of silver can be made to serve the purpose
very well.

[Illustration: FIG. 103.—The Base with Location of Holes.]

[Illustration: FIG. 104.—Top View of Finished Coil.]

The vibrator spring should also be fitted with a similar contact point.

[Illustration: FIG. 105.—Side View of Completed Coil.]

The medical coil is very easy to connect. Run the inside primary
terminal to the binding post on the rear left hand corner of the base.
Connect the other terminal to the vibrator post. A wire should be led
from the adjustment screw post to the binding post mounted on the
forward left hand corner of the base.

[Illustration: FIG. 106.—Vibrator Parts.]

One or two cells of battery should be sufficient to operate the coil.
Connect the battery to the two binding posts. Adjust the thumbscrew
until the contact on the end just touches the contact point on the
vibrator spring. The current will then flow through the primary winding
and magnetize the core. The magnetism of the core will draw the armature
towards it, thus pulling the contacts apart and interrupting the
current. The process will repeat itself very rapidly at a speed
depending upon the adjustment of the thumbscrew and as long as the
battery remains connected.

[Illustration: FIGS. 107 and 108.—Two Types of Handles.]

The handles for the coil are very easily made out of a piece of brass
tubing about two and one-half inches long and five-eighths of an inch in
diameter. They can also be made by rolling a piece of sheet brass or tin
into a tube and soldering the edges together. The illustration shows two
methods of making the handles and attaching the cords. The handle in the
upper part of the illustration is made from a piece of tubing. A wooden
plug or cork is fitted into one end. The wire passes through a hole in
the centre of the plug and is turned back over the edge so that when the
plug is forced into the tube, the wire will make contact with it. The
handle in the lower part of the illustration is made from one of the
brass cylinders in which the indelible ink for rubber stamps is
supplied. A hole is bored in the bottom through which the wire passes.
The end of the wire is soldered to a piece of stiff brass wire bent into
the shape of a hairpin. The ends of the wire are spread apart so that
they will spring against the inside of the tube. The connector is then
pulled up inside of the handle.

The flexible wires or "cords" as they are sometimes called, attached to
the handles, should be about eighteen inches long. The opposite ends to
the handles should be led through two holes in the base, in front of the
bobbin. The left hand cord should be connected to the vibrator post and
the right hand cord to the outside secondary terminal.

The coil is now complete, ready for operation. Connect the battery to
the binding posts. Start the interrupter and grasp one of the handles in
each hand. Draw the regulator tube out of the bobbin gradually and the
current will gradually grow stronger and stronger until it is impossible
to hold the handles. When the regulator tube is all the way in the
bobbin it is practically impossible to feel the current. Of course any
intermediate strength between the two extremes can easily be secured.
The shock from the coil is harmless. When the regulator is all the way
out, the shock is very strong. The only result, however, is to make the
person receiving it drop the handles. The current from medical coils is
often prescribed by physicians for rheumatism and nervous disorders, but
it must be properly applied in order to be of benefit.

CHAPTER XI. THE CONSTRUCTION OF SPARK COILS.

A Spark Coil is one of the most interesting pieces of apparatus that an
experimenter can possess. Not only can it be used to transmit wireless
messages, but numerous and various experiments may be performed with its
aid.

The purpose of a spark coil is to generate enormously high voltages
which are able to send sparks across an air space which ordinary battery
currents of low voltage could not possibly pierce.

[Illustration: FIG. 109.—Induction or Spark Coil.]

It consists of an iron core surrounded by a coil of heavy wire known as
the "primary" and a second outside winding of finer wire known as the
"secondary." The primary is connected to a few cells of dry battery in
series with an "interrupter."

Every time that the interrupter shuts off the battery current in the
primary, currents are induced in the secondary which are of sufficiently
high voltage or pressure to leap across a space in the shape of sparks.

A spark coil is not very hard to construct, but it requires careful
workmanship and patience. It is not usually a job which can be finished
in a day, but will take quite a little time, especially in winding the
secondary.

In describing the construction of a spark coil in this chapter,
directions and dimensions have been given for a one-quarter inch coil.
The general method of procedure is the same for all sizes of coils, the
dimensions only, are different. The experimenter may therefore easily
build a larger coil than the one-quarter inch by consulting the tables
of dimensions.

Parts for spark coils are for sale by many electrical houses and it is
possible to purchase the complete parts for less than the separate
materials would cost.

Such parts are made by special machinery and therefore are produced
quite cheaply.

The Core is made of soft iron "core wire" about No. 20 or 22 B. & S.
Gauge. Each piece should be four and three-quarters inches long. Iron
wire may be bought already cut to length from various houses dealing in
experimenter’s supplies. Considering the amount of labor that is
required to cut each piece to length arid then straighten it out, it is
cheaper to purchase the wire already cut.

[Illustration: FIG. 110.—The Primary and Core.]

──────────────────────────────────────────────────────────────────
Size of Coil. O Length of P Diameter of Primary Wire
Core Core
──────────────────────────────────────────────────────────────────
1/4 inch 4 3/4 inches 1/2 inch 18 B. & S.
──────────────────────────────────────────────────────────────────
1/2 inch 5 inches 5/8 inch 18 B. & S.
──────────────────────────────────────────────────────────────────
1 inch 7 inches 5/8 inch 18 B. & S.
──────────────────────────────────────────────────────────────────

"Core wire" is a special grade of wire which is very soft and has been
annealed.

If ordinary iron wire is used in making a core, it must first be
annealed. This is accomplished by tying the wire in a compact bundle and
placing it in a wood fire until it is red hot. After the wire is hot,
cover it with ashes and allow the fire to die away.

When the fire has gone out and the wire has cooled the annealing process
is complete. Enough wires each four and three-quarters inches long to
form a compact bundle one-half inch in diameter will be required.

[Illustration: FIG. 111.—The Secondary Winding.]

───────────────────────────────────────────────────────────────────
L Size L Length of M No. of M Size No. of Turns Wire
of Coil Secondary Sections of Hole per Section
───────────────────────────────────────────────────────────────────
1/4 in. 2 3/8 in. 1 1 1/18 5,000 37
in. en.
───────────────────────────────────────────────────────────────────
1/2 in. 2 3/8 in. 1 1 1/8 10,000 37
in. en.
───────────────────────────────────────────────────────────────────
1 in.¹ 2 2/8 in. 1 1 1/8 10,000 37
in. en.
───────────────────────────────────────────────────────────────────

¹ There are two sections of secondary used on the 1-inch coils.

Cut a piece of tough wrapping paper about six inches long and four and
one-half inches wide. Roll it up in the form of a tube so that it is six
inches long and one-half inch in diameter inside.

Glue the inside and outside edges of the paper so that the tube cannot
unroll and then slip the core wires into it until the tube is packed
tightly and no more can be slipped in.

The core is now ready for the primary, which consists of two layers of
No. 18 B. & S. Gauge cotton covered wire wound over the core for a
distance of three and three-quarters inches. The winding should start
five-eighths of an inch from one end of the core. The wire must be wound
very smoothly and carefully. The inside end of the wire can be fastened
so that it will not become loose by placing a short piece of tape
lengthwise of the core and winding two or three turns over it. Then
double the end back and complete the winding over it. The end of the
wire can be fastened by imbedding a piece of tape under the winding with
a small loop projecting and then passing the wire through the loop.

Figure 110 shows the complete core with primary winding in position.

*The Secondary* is a much more tedious job than the primary and must be
very carefully made. Whenever it is possible for the experimenter to
purchase a secondary already wound he is advised to do so.

The secondary consists of 5,000-6,000 turns of No. 37 B. & S. Gauge,
enameled wire wound in smooth, even layers, with two layers of paper
between every two layers of wire.

The primary winding is wrapped with six layers of "empire cloth or
paper." Empire cloths and papers are a yellow insulating material made
by treating linen or paper with linseed oil.

Roll up a paper tube of five or six layers of paper so that the finished
tube is two and one-half inches long and of proper inside diameter to
just slip over the primary winding when the empire cloth or paper is in
position.

The secondary is wound over this paper tube. It will be necessary to
mount the tube on a round wooden mandrel fitted with a small crank or
handle so that the tube may be revolved. A "winder" may be very easily
made by mounting a round wooden stick of the same diameter as the inside
of the paper tube in a pair of wooden supports. Bore a hole in one end
of the stick and bend a piece of stiff wire in it so as to form a crank.

[Illustration: FIG. 112.—The Fixed Condenser.]

───────────────────────────────────────────────────────────────────
Size Length Width Length Width No. of No. of
of of of of of Paper Tinfoil
Coil Paper Paper Tinfoil Tinfoil Sheets Sheets
───────────────────────────────────────────────────────────────────
1/4 30 in. 4 3/8 30 in. 4 in. 5 4
in. in.
───────────────────────────────────────────────────────────────────
1/2 30 in. 4 3/8 30 in. 4 in. 5 4
in. in.
───────────────────────────────────────────────────────────────────
1 in. 30 in. 4 3/8 30 in. 4 in. 7 6
in.
───────────────────────────────────────────────────────────────────

The paper placed between each two layers of the secondary winding should
be the special waxed paper which is made for that purpose.

Start and end each layer of wire one-half inch from the edges of the
paper. Wind the wire in smooth, even layers, permitting each turn to
touch the other, but none to lap over. Wind on two layers of waxed paper
between each layer of wire and the next. The paper must be put on
smoothly and evenly so as to afford a firm foundation for the next layer
of wire.

The wire should never come nearer to the edges of the paper than
one-half inch or the insulation of the secondary will be weak and the
coil not liable to give a long spark.

The utmost care should be used not to break the wire. If it should
break, the ends must be very carefully connected. The number of turns
that each layer averages should be carefully noted so that by keeping a
record of the number of layers it is possible to tell how many turns
have been wound on. When five to six thousand turns have been wound on
the secondary it is sufficiently large, and the outside end of the wire
should be fastened and prevented from unwinding by securing it with a
drop of sealing wax.

When winding a secondary remember that if at any point in the work, you
allow the winding to become irregular or uneven, the irregularity will
be much exaggerated on the succeeding layers. For this reason do not
allow any irregularities to occur and if the wire tends to go unevenly,
wind on two or three extra layers of the waxed paper to smooth it out.

[Illustration: FIG. 113.—Details of the Wooden Coil Heads.]

──────────────────────────────────────────────────────────────────
Size of Coil D K J
──────────────────────────────────────────────────────────────────
1/4 in. 3 in. 2 1/2 in. 1/2 in.
──────────────────────────────────────────────────────────────────
1/2 in. 3 in. 2 1/2 in. 5/8 in.
──────────────────────────────────────────────────────────────────
1 in. 3 1/2 in. 3 in. 5/8 in.
──────────────────────────────────────────────────────────────────

*The Condenser* consists of alternate layers of tinfoil and paraffined
paper piled on top of each other and then rolled up.

Four sheets of tinfoil, thirty-six inches by two and three-quarters
inches wide will be required. Eight strips of waxed condenser paper,
three and one-quarter inches wide and thirty-six inches long are
necessary.

Lay one sheet of paper out flat on a table or board and place a sheet of
tinfoil over it. The tinfoil should be along the centre of the paper
strip so that there is a one-quarter inch paper margin along the sides.
One end of the tinfoil should project over the end of the paper about
two inches. Lay two sheets of waxed paper over the tinfoil making them
line up with the first paper sheet all around. Then place another strip
of tinfoil on the paper. It should be directly above the first sheet of
tinfoil, but the end of the tinfoil must overlap the paper by two inches
at the opposite end from the first sheet. Place two more sheets of paper
over the tinfoil and on top of that a third strip of foil. The third
strip of foil should line up exactly with the first strip. Then lay two
more sheets of waxed paper over the third sheet of foil and place the
fourth sheet of tinfoil in position making it exactly line up with the
second sheet. Place a single sheet of paper on top.

The result should consist of four sheets of tinfoil insulated from each
other with two strips of paper between each two strips of foil.

Connect the first and third sheets together with a wire and the second
and fourth sheets likewise.

Cut out a piece of cardboard, one and one-quarter inches wide and three
and one-quarter inches long. Lay the cardboard on one end of the
condenser and roll the condenser up around it very tightly. Tie it with
a piece of string to keep it from unrolling, and dip it in some melted
paraffine. Then place it between two boards with a weight on top so as
to press it out flat.

*The Coil Heads* are made from two hardwood blocks three inches square
and one-half an inch thick. A circular groove, two and one-half inches
in diameter and one-quarter of an inch deep is turned in each block to
receive a cardboard tube of the same diameter. The two upper corners of
each of the blocks are rounded slightly to improve their appearance. One
of the heads has a round hole one-half inch in diameter bored through
the centre so that one end of the core may be passed through. The core
should project through about one-eighth of an inch. The other head is
bored with a hole of the same diameter but the hole should not pass all
the way through, and serves merely to receive and support the other end
of the core.

[Illustration: FIG. 114.—Details of the Wooden Base.]

───────────────────────────────────────────────────────────────────
Size of Coil A B C
───────────────────────────────────────────────────────────────────
1/4 in. 8 in. 4 in. 1 1/8 in.
───────────────────────────────────────────────────────────────────
1/2 in. 8 1/4 in. 4 1/2 in. 1 1/8 in.
───────────────────────────────────────────────────────────────────
1 in. 10 1/4 in. 4 1/2 in. 1 1/4 in.
───────────────────────────────────────────────────────────────────

*The Base* of the coil is a box eight inches long, four inches wide and
one and one-eighth inches deep. It is made in the form of a hollow box.
Give the base a coat of stain, preferably some dark color, such as
mahogany, and then a coat of shellac or varnish.

The wooden heads should be stained black.

The parts of the interrupter are shown in Figure 115. They cannot be
made by every experimenter on account of the tools required, but can be
purchased very cheaply from concerns dealing in material for
experimenters.

*The Standard* is a piece of hexagonal brass rod one and
three-sixteenths inches long and three-eighths of an inch in diameter.
The lower end of the standard is tapped to receive an 8-32 machine
screw. A hole is bored at right angles to the axis of the standard, one
inch from the lower end and tapped to receive an 8-32 thumbscrew.

[Illustration: FIG. 115.—Details of the Interrupter. The Spring and
Standard for the One inch coil should be made one-quarter of an inch
longer.]

The Thumbscrew should be about seven-eighths of an inch long and be
provided with a lock nut so that it can be fastened in position. The end
of the thumb-screw is drilled with a small hole and a contact point
driven in tightly. The contact point is usually a piece of platinum
wire, but in the case of a small coil may be a piece of the special
contact wire which is sold for just this purpose.

[Illustration: FIG. 116.—The tube.]

──────────────────────────────────────────────────────────────────
Size of Coil Length of Tube Diameter of Tube
──────────────────────────────────────────────────────────────────
1/4 inch 4 1/4 inch 2 1/2 inch
──────────────────────────────────────────────────────────────────
1/2 inch 4 1/2 inch 2 1/2 inch
──────────────────────────────────────────────────────────────────
1 inch 6 1/2 inch 3 inch
──────────────────────────────────────────────────────────────────

*The Spring* is a piece of thin steel, three-eighths of an inch wide and
two and one-eighth inches long. Several holes are drilled in it. The
illustration shows the exact location of these holes. The holes A and C
should be just large enough to allow an 8-32 machine screw to slip
through. The hole B is just large enough to receive a piece of contact
wire.

*The Contact* wire should be about three-thirty-seconds of an inch long
and be slipped in the hole and riveted in place.

*The Armature* is a piece of soft iron cut out of a rod one-half an inch
in diameter. It should be about one-quarter of an inch thick, but should
have a small stud left on one face so that the stud may be slipped into
the hole marked C in the steel spring and the armature then riveted
firmly to the spring by flattening out the stud.

[Illustration: FIG. 117.—The Bridge.]

──────────────────────────────────────────────────────────────────
Size of Coil E Length I Width
──────────────────────────────────────────────────────────────────
1/4 inch 4 7/8 inch 3/4 inch
──────────────────────────────────────────────────────────────────
1/2 inch 5 1/8 inch 3/4 inch
──────────────────────────────────────────────────────────────────
1 inch 7 1/8 inch 3/4 inch
──────────────────────────────────────────────────────────────────

The spring is bent at right angles about one-half inch from the end as
shown by the dotted line in Figure 115.

*A Cardboard Tube*, two and one-half inches in diameter and four and
one-quarter inches long, is used to inclose the primary and secondary
windings when they are in position. The tube may be given a very fine
appearance by gluing a single layer of black bookbinders’ cloth over it.

*The Bridge* shown in Figure 117 is a strip of wood about one-eighth of
an inch thick, four and seven-eighths inches long and three-quarters of
an inch wide. It is stained to match the base and is then given a coat
of shellac or varnish. Two holes are bored in, the bridge, one inch from
each end.

The coil is now ready for assembling. Figure 118. shows a cross-section
of the complete coil.

Slip the secondary over the insulating cloth or paper wrapped around the
primary. Pass one end of the core through the hole in the coil head
making sure that the groove is on the side towards the secondary. The
secondary should be exactly in the centre of the primary.

[Illustration: FIG. 118.—Section of the Spark Coil showing the
arrangement of the Parts.]

Slide the cardboard tube over the primary and secondary into the groove.
Lead the secondary terminals out through small holes in the cardboard
tube at opposite ends so that the wires are separated as far as
possible. Slip the other coil head over the end of the core and the tube
and then mount the coil on the top of the base. The coil should be in
the centre of the base when considered from front to back. It should be
to the left of centre, however, when viewed from side to side.

The two primary heads should be four inches apart When the coil is
assembled.

The primary wires are led down close to the wooden head and through the
base under the coil. They should be kept as far away from the secondary
as is possible.

The coil is fastened to the base by a wood screw passing through the
base into each of the wooden heads.

Figure 122 will show best how the interrupter is arranged. The brass
spring carrying the armature at its upper end is mounted in front of the
core end projecting through the wooden head. The standard carrying the
thumbscrew and the lock nut are mounted directly behind the spring in
such a position that the contacts touch each other and line up
perfectly.

[Illustration: FIG. 119.—End View of the Complete Coil.]

──────────────────────────────────────────────────────────────────
Size of Coil B Width of Base D Width of Head
──────────────────────────────────────────────────────────────────
1/4 inch 4 inch 3 inch
──────────────────────────────────────────────────────────────────
1/2 inch 4 inch 3 inch
──────────────────────────────────────────────────────────────────
1 inch 4 1/2 inch 3 1/2 inch
──────────────────────────────────────────────────────────────────

A small brass washer is placed between the standard and the base so that
it will not "bite" into the wood when the screw is tightened. The
standard and the spring are both mounted by 8-32 brass machine screws
passing through the base.

Two binding posts are mounted on the corners of the base near the
interrupter.

[Illustration: FIG. 120.—Side View of the Completed Coil.]

───────────────────────────────────────────────────────────────────
Size of A C D E F G H Q
Coil
───────────────────────────────────────────────────────────────────
1/4 in. 8 in. 1 3 4 3 1 5/8 4
1/8 in. 7/8 in. 7/16 in. 1/4
in. in. in. in.
───────────────────────────────────────────────────────────────────
1/2 in. 8 1/4 1 3 5 3 1 5/8 4
in. 1/8 in. 1/8 in. 7/16 in. 1/2
in. in. in. in.
───────────────────────────────────────────────────────────────────
1 in. 10 1 3 7 4 1 5/8 6
1/4 1/4 1/2 1/8 in. 7/16 in. 1/2
in. in. in. in. in. in.
───────────────────────────────────────────────────────────────────

The condenser is fastened to the under side of the base by means of a
wooden strip passing across it and secured to the base by means of two
small wood screws.

One of the binding posts is connected to one of the primary wires. The
other primary wire is connected to the spring. The other binding post is
connected to the standard.

The condenser is connected directly "across" the interrupter, that is,
one wire is connected to the spring and the other wire to the standard.

Two binding posts are mounted on the wooden bridge and then the bridge
is fastened across the top of the coil by means of two brass nails. The
secondary terminals are connected to these binding posts.

The Coil is now ready for operation. Connect two pieces of wire to the
secondary binding posts and bring them toward each other until they
almost touch. The space between should be about one-quarter of an inch
long.

[Illustration: FIG. 121.—Diagram of Connections.]

Connect three or four good dry cells to the primary posts and turn the
thumbscrew until the contact point on the end touches the contact on the
spring. The interrupter should immediately commence to "buzz" and if the
coil has been properly constructed and connected, a stream of sparks
will jump between the wires connected to the secondary.

It may be possible that the action of the interrupter and consequently
the strength of the sparks at the secondary can be improved by bending
the spring’ either away or towards the core. A little experimenting will
soon show just how much tension the spring should have. When the proper
position of the thumb-screw is found, tighten the lock nut so that it
cannot change its adjustment.

[Illustration: FIG. 122.—Perspective view of Coil showing names of the
various parts.]

Details and instructions for building and experimenting with larger
spark coils are given in our books "Experimental Wireless Construction"
and "Induction Coils."

EXPERIMENTS WITH SPARK COILS.

Experiment 1—An Imitation Gassiot’s Cascade.

Wrap a piece of copper wire around a small glass jar and connect it to
one of the secondary terminals of the coil. Fill the jar up with water
and dip a wire connected to the other secondary terminal into the water.
If the coil is then set into operation, the entire outside of the jar
will be covered with sparks starting from the wires and rushing upwards
into the neck of the jar. If the coil used for this experiment is a very
small one, the glass jar should also be very small, as for example, a
small medicine vial. This experiment shows off the best when performed
in the dark.

Experiment 2—A Ghostly Light

Grasp the bulb of an old incandescent electric light bulb in one hand
and touch the base of the lamp to one of the secondary terminals of the
coil. Set the coil in operation and the bulb will glow with a weird
greenish light. This experiment will work best in the dark.

Experiment 3—Lighting Geissler Tubes.

The most beautiful and wonderful effects may be obtained from Geissler
tubes operated from a spark coil in a dark room. These tubes come in an
almost endless variety of styles and shapes. They are exhausted of air
and fitted with metallic wires, sealed into the ends, a portion of the
wire projecting outside in the form of small rings, so that the
connections are easily established.

Some of the tubes are of ordinary glass, while others are made of glass
having in its composition certain metallic oxides. Some of the tubes are
filled with various gases in a highly rarified state. Others have a
double wall with the outside filled with a fluorescent liquid, such as
an aqueous solution of sulphate of quinine or an alcoholic solution of
strammonium, and other compounds.

The tubes are not very expensive. They can be obtained in a great
variety of sizes. Most well stocked electrical houses carrying goods for
the electrical experimenter have them on hand.

Such tubes are of necessity very fragile articles and should be handled
with extreme care. It is a good plan to keep them wrapped in cotton and
to put them away in a strong wooden box, so as to reduce the danger of
breakage.

The very smallest coil, even the one-quarter inch size, will serve to
light a large tube. . In fact, if too large a coil is used, there is
danger of spoiling the tube.

The tubes are connected to the spark coil by running a wire from each of
the small rings at the ends of the tubes to the secondary terminals.
Several tubes may be connected in series when a or 1-inch coil is
available.

To show the best effects, the room should be in perfect darkness and the
tubes should be placed against a background of black velvet.

Experiment 4—Flickering Light.

Spread your fingers out and move your hand rapidly back and forth over a
lighted Geissler tube in a darkened room. Your hand will appear to have
ten or twelve fingers instead of five. This is due to the fact that the
light from a Geissler tube is flickering and not at all steady. Each
time the interrupter of the coil opens, the current is sent through the
tube and lights it momentarily. The flickering is almost too rapid to be
perceived by the naked eye until you have something like the fingers or
a pencil in front of it.

Experiment 5—Rotating a Geissler Tube.

An extremely pretty effect can be secured by rotating a Geissler tube at
high speed while it is lighted. This may be accomplished by means of an
electric motor of small size. The tube is tied tightly to a stick of
wood which has a hole drilled exactly in its center into which the motor
shaft fits tightly. Two rings of metal are mounted on the motor shaft,
and a wire is led from each to a terminal of the tube. A copper strip
rests on each ring, and these two copper strips are connected to the
secondary of the spark coil.

When the motor is started and the coil set into operation, the tube will
appear like the spokes of a wheel. The intermittent light will make the
tube visible for a fraction of a second in various positions around the
circle as it rotates, and this gives the effect which is much like that
of a pinwheel.

Experiment 6—Fluorescent Writing.

Dissolve some sulphate of quinine in water and then draw a picture or
design or write a sentence on a piece of white paper with it, and allow
it to dry. The writing will be invisible, but if you hold it up to a
lighted Geissler tube in a dark room, it will appear as if written with
a beautiful blue ink.

Experiment 7—An Electric Bomb.

This is a very interesting experiment from which there is no danger if
it is performed carefully.

The mortar is nothing more or less than a piece of wood which is hard
and well seasoned, and has a small hole bored in its axis about
three-eighths of an inch in diameter and an inch deep.

Two short lengths of stiff copper wire should be inserted through the
sides near the bottom of the hole so as to form a small spark gap
between the ends.

Put a little gunpowder in the mortar and connect two wires from the
secondary terminals of the spark coil to the spark gap. Place a cork
loosely in the muzzle of the mortar and then, standing well away, close
the switch in the primary circuit of the coil, so that a spark passes
through the mortar. The spark will ignite the powder and it will explode
with a loud report.

*Caution*.—Do not use more than a pinch of powder at a time as this is
sufficient to cause a sharp explosion.

Experiment 8—Electrifying the Garbage Can.

If you are ever annoyed by dogs or cats that knock the cover off the
garbage can in their search for canine and feline delicacies, you can
give them the surprise of their lives with the aid of a spark coil upon
the occasion of their next visit.

Set the can upon a thick piece of perfectly dry wood and run a wire from
the can to one secondary terminal of the spark coil. Connect the other
secondary terminal to the ground or to a water or gas pipe.

The next time you see a dog with his nose in the can, close the switch
connected to the primary circuit. What happens will not hurt the dog,
but he will travel for home as fast as four legs can carry him.

Experiment 9—How to Make an Electric Spark Photograph Itself.

This experiment must be conducted in a dark room with the aid of a
photographer’s ruby lamp so that the photographic plates used will not
become "light struck" and spoiled.

Place an ordinary photographic plate on a piece of sheet metal with the
coated or sensitive side up. Connect the piece of sheet metal to one of
the secondary terminals of the spark coil by means of a wire.

Then sift some dry starch powder, flour of sulphur or talcum powder
through a thin piece of gauze on to the plate. Lead a sharp pointed wire
from the other secondary terminal of the coil. Complete the primary
circuit of the coil just long enough to make one single spark.

Wipe the powder off the plate thoroughly and develop it in the usual
manner. The negative will show a peculiar electric discharge looking
very much like sea moss. No two photographs will be alike. The test
results are obtained when only one or two sparks are allowed to pass.

Arts and Science Series No. 9

Home-made

Electrical Apparatus

A Practical Handbook for Amateur

Experimenters

In Three Parts

*Volume III*

_Second Edition_

*BY*

*A. M. Powell*

PUBLISHED BY

COLE & MORGAN, Inc.

Publishers of the Arts and Science Series

P.O. BOX 473 CITY HALL STATION

NEW YORK, N. Y.

Printed in U. S. A.

COLE & MORGAN, Inc.

CHAPTER XII. HOW TO MAKE A DYNAMO-MOTOR

It is very difficult to construct a first class dynamo without resort to
the materials and methods employed in the manufacture of commercial
machines. The necessity for careful workmanship in every detail, can
hardly be overestimated. Poor workmanship and poor materials will always
result in an inefficient machine. Telegraph instruments, toy motors,
etc., may be constructed from all sorts of odds and ends of materials,
and they will work fairly well, but in order to make a real dynamo it
will be necessary to use certain materials for which nothing can be
substituted.

[Illustration: FIG. 123—Front view of the Field Casting.]

The field casting must be soft gray cast iron and the magnet wire should
be of good quality.

Both the field and the armature of the small dynamo described in the
following pages are cast iron and patterns will be necessary in order to
form the moulds for the castings. It may be possible for several
experimenters to club together and make the patterns, or have them made,
for building this dynamo.

The dynamo described has an output of about ten watts. It may also be
used as a motor and as such will develop considerable power. The
castings for this machine are already on the market and may be obtained
from the publishers of this book.

[Illustration: FIG. 124.—Side elevation of the Field Casting.]

*The Field* is shown in Figures 123 and 124. The details in both
illustrations are fully dimensioned and probably no comment in that
direction will be necessary.

If the experimenter decides to make his own patterns he should use every
care to make certain that they are carefully and accurately made. They
should be made of wood and finished by rubbing with fine sandpaper until
perfectly smooth and then given a coat of shellac. The parts should also
be given a slight "draft" or taper toward one side so that the pattern
may be easily withdrawn from the mould.

[Illustration: FIG. 125.—Details of the Armature.]

The easiest way to bore out the "tunnel" of the field is to perform the
work on a lathe. If no lathe is handy, the work can be accomplished with
nothing more than the aid of a file and a little patience. It should be
cleaned out until it is perfectly round and measures one and
five-sixteenths of an inch in diameter.

Any rough spots on the casting should be smoothed up with a file.

*The Armature* is illustrated in Figure 125. The centre of the armature
should be bored out to fit a three-sixteenths inch shaft.

The shaft is a piece of steel rod four inches long. The outside of the
armature should be turned down to a diameter of one and one-quarter
inches, making it one-sixteenth of an inch smaller in diameter than the
tunnel in the field.

*The Commutator* is illustrated in Figure 126. It has two sections and
consists of a short piece of brass tubing fitted on a fibre core and
split lengthwise on two opposite sides so that each section is insulated
from the other.

It is not very difficult to make such a commutator. A hole is drilled
through the fibre, which fits very tightly on the shaft. The shaft is
then placed in a lathe with the fibre in position and the latter turned
down until a piece of seven-sixteenths inch brass tubing can be driven
on. The tube should be five-eighths of an inch long. Then mark two lines
along the tube at points diametrically opposite. Bore two small holes to
receive two small screws, a short distance away from each side of these
lines and on each side of them. Make certain that the screws do not go
into the fibre far enough to touch the shaft. The commutator may then be
split along each side of the lines with a hacksaw, continuing the cut
right through the brass and slightly into the insulating core. The heads
of the screws should be filed off flush with the surface of the
commutator and the latter trued up and made perfectly smooth.

[Illustration: FIG. 126.—The Commutator.]

If each section of the commutator is provided with a small brass machine
screw near the back edge as shown in Figure 126, it will greatly
facilitate connection with the ends of the armature windings.

The armature, shaft and commutator, as they should appear when assembled
are shown in Figure 127.

Those portions of the armature and shaft which will come into contact
with the armature wire should be insulated with shellaced paper. Soak
the paper in the shellac until it is soft and it can be very easily
pressed into proper shape to fit the armature. Allow the shellac to dry
and harden before winding on the wire.

[Illustration: FIG. 127.—The Armature and Commutator Assembled on the
Shaft ready for winding.]

The armature will not need to be fastened on the shaft if it is a tight
fit and cannot be twisted. If it is loose, it may be fastened by means
of a small set screw or pin. The commutator should fit the shaft very
tightly so that it will not slip or twist.

*The Armature Winding* is No. 20 B. & S. Gauge single-cotton covered
magnet wire. Sufficient wire should be put on to fill up the winding
space completely. Do not, however, put on too much wire or it will
interfere with the field magnets and prevent the armature from
revolving. Test the winding after it is finished to see that the wire is
not "grounded" or connected to the armature at any point. If the
insulation is perfect, give the winding a good coat of shellac and allow
it to dry. The ends of the winding are each connected to one of the
commutator sections as shown in Figure 127.

*The Field Winding* is No. 20 B. & S. Gauge single cotton covered wire.
The wire should be wound on in smooth, even layers, and the winding
space between the flanges completely filled up. The winding space in the
field frame should be insulated with shellaced paper by covering the
core and the flanges. The flanges are best insulated with paper disks
cut in two halves so that they will slip around the core.

[Illustration: FIG. 128.—Details of the Wooden Base.]

The details of the wooden base are shown in Figure 128. It is a
rectangular shaped piece of wood, five inches long, four inches wide and
five-eighths of an inch thick. The corners are slightly rounded.

*The Bearings* are small brass castings. They are both alike. The
details are illustrated in Figure 129. It will be necessary to make a
wooden pattern and send it to a brass foundry for castings. The castings
should be smoothed up with a file and then drilled. The shaft hole
should be three-sixteenths of an inch in diameter and the screw holes
just large enough to pass an 8-32 screw. The bearings are fastened to
the projecting arms on the field casting by means of round headed 8-32
brass machine screws. The armature should revolve exactly in the centre
of the tunnel in the field and should be free in the bearings so that it
runs easily and without binding.

*The Brushes* are illustrated in Figure 131. They are cut out of spring
copper and bent according to the shape and dimensions shown.

The field is fastened to the base by means of two large machine screws
passing upwards through the base into threaded holes in the bottom of
the casting. The brushes are bent at right angles and mounted on the
base on either side of the commutator with small round headed wood
screws. They should bear firmly against the commutator. The commutator
should be in such a position on the shaft, in relation to the armature,
that the dividing lines between the two sections are directly opposite
the centre of the iron faces of the armature as shown in Figure 127.

[Illustration: FIG. 129.—Details of the Bearings.]

[Illustration: FIG. 130.—The Pulley.]

[Illustration: FIG. 131.—The Brushes.]

The shaft should be fitted with a small grooved pulley to accommodate a
small round belt. The completed dynamo is shown in Figure 132. The
dynamo is connected in what is known as "shunt." One terminal of the
field magnet is connected to one brush and the other terminal to the
other brush. A wire is then led from each one of the brushes to a
binding post.

Before the dynamo will generate current it will be necessary to
magnetize the field by connecting the terminals to several strong
batteries and allowing the current to flow through for several seconds.
A shunt wound dynamo will only generate when run in a certain direction.
In order to make it generate when run in the opposite direction, it is
necessary to reverse the field connections to the brushes.

[Illustration: FIG. 132.—The Completed Dynamo.]

The dynamo will be found to operate as a very powerful little motor, but
on account of having only a two pole armature, it must be started when
the current is turned on by giving the shaft a twist.

The dynamo may be driven by a small water motor or from the driving
wheel of a sewing machine. It may be used as a generator for lighting
lamps, ringing bells, electroplating, etc.

CHAPTER XIII. AN ELECTRIC BATTERY MOTOR.

AN electric motor has two essential parts. These are a field magnet for
furnishing a strong magnetic field and a revolving armature.

It is an easy matter to make a strong electric motor suitable to operate
on batteries by the exercise of a little careful workmanship.

The field frame and armature of the motor shown in Figure 133 are
laminated, that is, built up of separate sheets of iron. They may be
made out of sheet tin or ordinary stove pipe iron. The cheapest and
simplest method of securing good flat material is to get some old scrap
from a tinner’s or plumbing shop.

*The Details of the Field* are shown in Figure 134. The exact shape and
dimensions can be understood by reference to the illustration. Lay out
one lamination very carefully as a pattern. Cut it out and smooth up the
edges, making certain that it is perfectly true to size and shape. Then
use it as a template to lay out the other laminations by placing it on
the metal and scribing a line around the edges with a sharp pointed
needle. Enough laminations should be cut out to make a pile five-eighths
of an inch high when tightly pressed together.

[Illustration: FIG. 133.—The completed Electric Motor.]

*The Armature* is made in exactly the same manner as the field frame,
that is, by cutting out a pattern according to the shape and dimensions
shown in Figure 136 and using it as a template to lay out the other
laminations. Enough should be cut to make a pile five-eighths of an inch
high when tightly squeezed together.

[Illustration: FIG. 134.—Details of the Field Frame.]

[Illustration: FIG. 135.—The Assembled Field ready for Winding.]

The armature is one and three-sixteenths inches in diameter. The hole in
the field frame which accommodates the armature is one inch and
one-quarter in diameter so that there is a space in between for the
armature to revolve in.

The hole through the center for the shaft should be of such diameter
that the laminations will force very tightly on a shaft one-eighth of an
inch in diameter. The laminations should be very carefully flattened and
then forced over the steel shaft which is two and one-eighth inches
long. Clean up all the rough edges with a file and smooth the outside so
that it will revolve properly in the field without scraping.

[Illustration: FIG. 136.—Details of the Armature Lamination.]

[Illustration: FIG. 137.—The Armature assembled on the Shaft ready to
Wind.]

Figure 137 illustrates the armature assembled on the shaft and ready to
be wound.

*The Armature Windings* consist of four layers of No. 22 B. & S. Gauge
double cotton covered magnet wire wound around each leg. The iron should
be very carefully insulated with shellaced paper before the wire is put
in position so that there will not be any danger of short circuit due to
the sharp edges of the metal cutting through the insulation. Each leg
should contain the same number of turns of wire and all should be wound
in the same direction.

The Commutator is illustrated in Figure 138. It consists of a piece of
brass tubing seven-sixteenths of an inch long, five-sixteenths inside
and three-eighths of an inch outside. It should be forced onto a piece
of fibre five-sixteenths of an inch in diameter and seven-sixteenths of
an inch long. Split the tube into three equal parts by dividing it
longitudinally with a hack-saw. Make a fibre ring which will force onto
the tube very tightly when it is in position on the fibre core and so
hold the three commutator sections firmly in position. The sections
should be so arranged that there is a small space between each two and
they are perfectly insulated from each other. The fibre core should have
a one-eighth inch hole through the centre so that it may be forced
tightly onto the shaft and up against the armature after the windings
are in position. The commutator should be in such a position that the
split between each two sections come directly opposite the centre of
each winding. Suppose that the windings are lettered A, B, and C, the
commutator section between A and B is numbered 1, that between A and C
is No. 2, and the one between C and B is No. 3. Then the inside terminal
of B is connected to the outside terminal of A and soldered to the end
of commutator section No. 1 close to the winding. The inside end of B is
connected to the outside terminal of C and to commutator section No. 2.
The inside end of winding C is connected to the outside of B and to
commutator section No. 3. The connection of the armature windings to the
commutator are represented by the diagram in Figure 139.

[Illustration: FIG. 138.—The Commutator.]

[Illustration: FIG. 139.—Diagram showing how the Armature Coils are
connected to the Commutator Sections.]

[Illustration: FIG. 140.—The Bearings.]

*The Field Winding* consists of five layers of No. 18 B. & S. double
cotton covered wire. A much neater job may be made of this part of the
work if two fibre heads are cut to slip over the field and support the
ends of the winding as shown in the illustration in Figure 133.

*The Bearings* are illustrated in Figure 140. They are made out of
three-eighths inch brass strip one-sixteenth of an inch thick by bending
and drilling as shown in the illustration. The location of the holes is
best understood from the drawing. The larger bearing is assembled on the
field at the side towards the commutator.

Assembling the motor is a comparatively easy matter if it is done
properly and carefully. The bearings are mounted on the field frame by
screws passing through the holes B and B into a nut on the outside of
the bearing at the opposite side of the field.

The armature should revolve freely without binding and without any
danger of scraping against the field. Slip some small fibre washers over
the ends of the shaft between the armature and the bearings so as to
take up all end play.

*The Brushes* are made of spring copper according to the shape and
dimensions shown in Figure 141. They can be cut out with a pair of
snips.

Each brush is mounted on a small fibre block supported on the large
motor bearing. The holes marked A and C in the illustration should be
threaded with a 4-36 tap. The hole B should be made one-eighth of an
inch in diameter and drilled all the way through the block.

The holes A and C are used to fasten the blocks to the bearing. The
brushes are fastened to the blocks by means of a 6-32 screw with a nut
on the lower end.

*The Base* is a rectangular block, three inches wide, three and one-half
inches long and three-eighths of an inch thick. The motor is fastened to
the base by four small right angled brackets bent out of strip brass and
secured to the field frame by two machine screws passing through the
holes H and H into a nut at the opposite end.

[Illustration: FIG. 141.—The Brushes.]

One terminal of the field winding is connected to a binding post mounted
on the base. The other terminal of the field is connected to the right
hand brush. The end of the wire should be placed under the head of the
screw which holds the brush to the fibre block. The brush should be on
the under side of the block so that it bears against the under side of
the commutator.

The left hand brush bears against the upper side of the commutator and
is connected to a second binding post on the base of the motor. This
makes it a "series" motor, that is, the armature and the field are
connected in series.

[Illustration: FIG. 142.—The Fibre Block for supporting each Brush.]

The motor is now ready to run. Put a drop of oil on each bearing and
make certain that the curved portion of the brushes bear firmly against
the centre of the commutator on opposite sides. The armature having
three poles, should start without assistance and run at high speed as
soon as the current is applied. Two cells of dry or other battery should
be sufficient. The motor may be fitted with a small pulley so that its
power may be utilized for driving small models.

CHAPTER XIV. HOW TO BUILD AN ELECTRIC ENGINE.

An Electric engine is really a form of electric motor but differs from
the most common form of the latter in that the armature, instead of
revolving, oscillates back and forth, like the piston of a steam or
gasoline engine. Electric engines are not as efficient as electric
motors from the standpoint of the amount of power delivered in
proportion to the current used, but they make very interesting models
and the young experimenter will derive fully as much pleasure in
constructing one as from the construction of an electric motor. Various
forms of electric engines were made before the first practical electric
motor was invented. They amounted to little more than curiosities,
however, and could only be used where the expense of electric current
was not to be regarded.

[Illustration: FIG. 143.—Completed Electric Engine.]

The engine illustrated in Figure 143 is of the double action type. It is
provided with two electromagnets arranged so that one pulls the armature
forward and the other pulls it back. The motion of the armature is
transmitted to the shaft by means of a connecting rod and crank. It is
very simple to build and the design is such that it will operate equally
well whether it is made large or small. If you do not happen to have all
the necessary materials to build an engine according to the dimensions
shown in the drawings you can make it just one-half that size and it
will work equally well although it will of course not give as much
power.

The complete engine is shown in Figure 143. All the various parts have
been marked so that you can easily identify them in the other drawings.
It is well to study this illustration carefully first so that you will
understand just how all the parts are arranged.

*The Base* is illustrated in Figure 144. It is made of a piece of
hardwood, seven inches long, three and one-half inches wide and one-half
an inch thick.

[Illustration: FIG. 144.—The Engine Base.]

*The Magnets*. The size of the electromagnets will largely determine the
dimensions of the rest of the engine. The magnets shown in Figure 145
are made of three-eighths inch round iron, two and one-half inches long,
provided with two fibre washers one and one-eighth inches in diameter.
One end of each of the steel cores is drilled and tapped to receive an
8-32 iron screw. The experimenter may possibly be able to secure some
old magnet cores fitted with fibre heads from an old telephone bell or
"ringer" as they are sometimes called. A suitable bolt can be made to
serve the purpose by cutting it off to the right dimensions with a hack
saw. If a drill and a tap are not available for drilling and tapping the
end so that the core can be properly mounted in the frame of the engine
it is possible by the exercise of a little ingenuity to use the threaded
portion of a bolt to good advantage. The hole in the frame should then
be made larger so that the end of the bolt will slip through instead of
an 8-32 screw and the core clamped in position by a nut on each side.

The fibre washers are spaced two and one-sixteenth inches apart. The
space in between should be wound full of No. 18 B. & S. Gauge cotton
covered magnet wire. Before winding in the wire, cover the core with a
layer of paper so that the wire does not touch the metal. The ends of
the wire should be led out through small holes in the fibre heads.

[Illustration: FIG. 145.—Details of the Electromagnet Bobbin.]

It is not absolutely necessary to use No. 18 B. & S. Gauge wire in
winding the magnets but this is the size which will give the best
results on the average battery.

[Illustration: FIG. 146.—Details of the Engine Frame.]

If you use larger wire, the engine will require more current from the
battery. If you use finer wire, a battery of a higher voltage will be
necessary. The current consumption will, however, be less.

*The Frame.*—The electromagnets are mounted in the frame of the engine
by means of two screws passing through the holes E and D. The details of
the frame are illustrated in Figure 146. It is made of a strip of
wrought iron or cold rolled steel, nine and one-quarter inches long, an
inch or an inch and one-eighth wide and one-eighth of an inch thick. The
material for making this part of the engine and also the bearings can
probably best be obtained at some blacksmith shop or hardware store.
Heavy galvanized iron can be used but it is not usually thick enough and
it may be necessary use two thicknesses. The ends of the strip are
rounded and bent at right angles so as to form a U-shaped piece with
sides one and three-quarters inches high. The holes D and E should be
large enough to pass an 8-32 screw. The holes A, B and C should be about
one-eighth of an inch in diameter. They are used to pass the screw which
hold the frame of the engine to the wooden base.

[Illustration: FIG. 147—The Bearings.]

*The Bearings* are shown in Figure 147. They are U-shaped and are made
out of a strip of iron or steel in the same manner as the frame of the
engine but are three-quarters of an inch wide instead of an inch and
one-eighth. The dimensions will be understood best by referring to the
drawing. The 3/32 inch holes near the top of each side are the bearing
holes for each end of the shaft. The one-eighth inch holes below are
used to fasten the brush holder in position. The holes in the bottom
serve to fasten the bearings to the base.

[Illustration: FIG. 148.—Details of the Shaft.]

*The Shaft* will probably prove the most difficult part of the engine to
make properly. The details are given in Figure 148. It is made of a
piece of one-eighth inch steel rod bent so that it has a "throw" of
one-half an inch, that is, is offset one-quarter of an inch so that the
connecting rod moves back and forth a distance of one half an inch. The
finished shaft should be three inches long. The piece of steel used
should be longer than this, so that it can be cut off to exact
dimensions after the shaft is finished. A second crank should be bent in
one end of the shaft so as to form an offset contact for the brushes.
This second crank will have to be at right angles to the first one and
should be much smaller. The ends of the shaft are turned or filed down
to a diameter of three-thirty second of an inch for a distance of about
the same amount so that they will fit in the bearing holes and turn
freely but not allow the whole shaft to slip through. The work of making
the shaft will require a small vice, a light hammer, files and a couple
of pairs of pliers. One pair of pliers should be of the round nosed type
and the other a pair of ordinary square jawed side cutters. It may
require two or three attempts before a perfect shaft is secured. When
finished it should be perfectly true and turn freely in the holes. The
bearings can be adjusted slightly by bending so that the shaft will fit
in the holes and be free but yet not be loose enough to slip out.

*The Armature* is a strip of soft iron, two and one-eighth inches long,
seven-sixteenths of an inch wide and three-sixteenths of an inch thick.
A one-sixteenth inch slot, three-eighths of an inch long is cut in one
end. A one-sixteenth inch hole is drilled through from one side to the
other, one-eighth of an inch from each end. The hole which passes
through the slot is used to pass the pin which pivots the armature to
the connecting rod. The other hole is used to mount the armature in its
bearing. The armature bearing is a small edition of the one which is
used to support the engine shaft. The details and the dimensions are
given in the lower left hand side of Figure 149. The armature is shown
in the centre of the same illustration. The connecting rod is
illustrated at the right. This is made from a strip of
three-sixty-fourths inch brass, three-sixteenths of an inch wide and one
and five-eighths inches long. A one-eighth inch hole should be drilled
close to one end and a one-sixteenth inch hole close to the other.

[Illustration: FIG. 149.—The Armature, Armature Bearing and Connecting
Rod.]

*The Brushes* are two strips of thin phosphor bronze sheet, two and
three-sixteenths inches long and nine-thirty-seconds of an inch wide.
They are illustrated in Figure 150. The block upon which they are
mounted is hard fibre. It is one and five-eighths inches long and
three-eighths of an inch square.

[Illustration: FIG. 150.—The Brushes.]

*The Flywheel*. It may be possible to secure a flywheel for the engine
from some old toy. It should be about three and one-half inches in
diameter. A flywheel can be made out of sheet iron or steel by following
the suggestion in Figure 151, which shows a wheel cut out of one-eighth
inch sheet steel. It is given the appearance of having spokes by boring
six three-quarter inch holes through the face as shown. The hole in the
centre of the wheel should be one-eighth of an inch in diameter. The
wheel is slipped over the shaft and fastened in position by soldering.

The parts are now all ready to assemble into the complete engine. Mount
the electromagnets in the frame and fasten the frame down to the wooden
base so that one end of the frame comes practically flush with the left
hand edge of the base. Fasten the bearing across the frame at right
angles by a screw passing through the centre hole in the bottom of the
bearing, through the hole A and into the base. The bottom of the bearing
should be bent slightly so as to straddle the frame. The bearings should
be secured and prevented from turning or twisting by two screws passed
through the other two holes in the bottom. Use round-headed wood screws
in mounting the bearing and the frame. The armature bearing should be
mounted on the frame directly between the two electromagnets. Then place
the armature in position by slipping a piece of one-sixteenth inch brass
rod through the bearing holes and the hole in the lower part of the
armature.

[Illustration: FIG. 151.—A Flywheel may be cut from sheet iron.]

Solder the flywheel in position on the shaft and snap the latter into
the bearings. Adjust the bearings so that the shaft will turn freely.
The connecting rod should be slipped over the shaft before it is placed
in the bearings. Fasten the other end of the connecting rod to the
armature by means of a piece of one-sixteenth inch brass rod which
passes through the small holes bored for that purpose. When the flywheel
is spun with the fingers, the armature should move back and forth
between the two electromagnets and almost but not quite touch the two
magnet poles. All the moving parts should be fitted firmly together but
be free enough so that there is no unnecessary friction and so that the
engine will continue to run for a few seconds when the flywheel is spun
with the fingers.

The brushes, supported on their fibre block should be mounted on the
bearing by means of two screws passing through the holes in the bearing
into the block. The position of the brushes should be such that the
shaft passes between the two upper ends but does not touch them unless
the small contact crank mentioned above is in proper position to do so.
The proper adjustment of the brushes, so that they make contact with the
shaft at the proper moment, will largely determine the speed and power
which the finished engine will develop.

Two binding posts should be mounted on the right hand end of the base so
that the engine can be easily connected to a battery. Connect one
terminal of the right hand electromagnet to one of the binding posts.
Run the other terminal of the electromagnet to the brush on the opposite
side of the shaft. Connect one terminal of the left hand electromagnet
to the other binding post and run the other terminal to the brush on the
opposite side of the shaft. Save for a few minor adjustments, the engine
is now ready to run. Connect two or three cells of dry battery to the
two binding posts and turn the flywheel so that it moves from right to
left across the top. Just as the crank passes "dead centre" and the
armature starts to move back away from the left hand magnet, the small
contact crank should touch the left hand brush and send the current
through the right hand magnet. This will draw the armature over to the
right. Just before the armature gets all the way over to the right, the
contact should break connection with the left hand brush and interrupt
the current so that the inertia of the flywheel will cause it to keep
moving and the armature to start to move over towards the left hand
magnet at which point the contact on the shaft should commence to bear
against the right hand brush, thus throwing the left hand magnet into
circuit and drawing the armature over to that side. If the brushes and
the cranks are in proper relation to each other the engine will continue
to repeat this operation and gradually gain speed until it is running at
a good rate.

The appearance of the engine can be improved by painting the metal parts
black and the flywheel red. The magnets can be wrapped with a piece of
bright red cloth to protect the wire against injury and brighten the
appearance of the engine.

CHAPTER XV. MINIATURE BATTERY LIGHTING.

The tungsten lamp has opened wonderful possibilities in the field of
electric lighting by means of miniature lamps operated from batteries.

The tungsten lamp uses less than one third the amount of current
required by the old-fashioned carbon filament lamps in producing the
same candle power. This means that the battery will last three times as
long.

Miniature lighting is one of the most practical phases of experimental
electricity to which the experimenter can apply his time. Battery
operated lamps will be found invaluable in many places for lighting dark
corners, hallways, barns, garages, camps, bungalows, workshops, etc.

*Tungsten Battery Lamps* are made in a great many different styles and
sizes.

The smallest sizes are used for flashlights, hand-lanterns, etc. These
are not rated according to their candlepower, but to the voltage which
they should be operated on. Flashlight lamps will be found satisfactory
as a means of illuminating closets, cellars, stairways, etc., but do not
give sufficient light for reading or any purpose of that sort. The light
which they give varies from one to three candle-power according to the
size of the lamp. They are made for 1.5, 2.8, 3.8 and 5.8 volts or
respectively one, two, three and four dry cells. Flashlight lamps are
provided with what is known as a miniature base only.

A very simple lighting arrangement which will prove exceedingly useful
for illuminating a dark closet, a coal bin or the face of a clock, etc.,
consists of a 1.5 volt lamp, a single cell of dry battery and a suitable
switch and wire. Such an installation may be made at a cost of less than
seventy-five cents.

[Illustration: FIG. 152.—Small Tungsten Battery Lamps.]

The lamp is mounted in what is known as a miniature porcelain base
receptacle. The switch may most conveniently be the type termed a "wood
base" switch. In case the lamp is installed for illuminating a clock, a
"pear push" and a flexible cord may be substituted for turning the light
off and on in place of the switch. It can then be suitably hung
alongside of the clock or bed as desired.

The wire should not be smaller than No. 18 B. & S. Gauge or else it will
offer too much resistance to the electric current and full benefit of
the candle-power of the lamp will not be secured. Annunciator wire is
preferable. It has good insulation and at the same time is not too large
to be easily run through corners, cracks, etc.

The diagram in Figure 153 shows how to connect the lamp to the battery
and switch. Figure 156 shows two dry cells connected in series for use
with a 2.8 volt lamp.

[Illustration: FIG. 153.—A Simple Lighting Arrangement.]

When more illumination is desired than that furnished by flashlight
lamps greater candle-power will be required. The following table shows
the voltages and candle-powers of those lamps which are most suitable in
such an instance:

· G6....4 volts 4 candle-power
· G6....6 volts 4 candle-power
· G8 6 volts 6 candle-power

They may also be operated from dry cells. If they are intended to be in
use for other than a few minutes at a time it will be well to use a
battery consisting of two sets of cells connected in series multiple.
The method of connecting cells in series multiple has already been
illustrated in Figure 35. This will lighten the strain on the battery
and it will be found that two sets of batteries used in series multiple
will last *more than twice* as long as one set used alone.

[Illustration: FIG. 154.—Showing the differences between the Candelabra,
Single Ediswan and Double Ediswan Types of Lamp Bases.]

Six volt lamps of more than six candle-power are best operated on
storage batteries because the current required is too great for dry
cells to give efficient service in such a case.

The tungsten lamps made for automobiles are ideal for miniature lighting
plants operated by storage batteries. The list below shows some of the
sizes on a current of six to eight volts.

The bases are made of brass and come in four different styles,
miniature, candelabra, single Ediswan and double Ediswan. The single and
double Ediswan are used on automobiles because the construction of the
base and the socket or the receptacle into which it fits is such that
the lamp cannot jar loose.

[Illustration: FIG. 155.—Miniature Sockets of the types known as "Flat
Base Porcelain," "Pin" and "Weatherproof."]

The candelabra base is probably the type best adapted to miniature
lighting elsewhere than on an automobile.

The letter "G" and the number in the first column indicates the size of
the glass globe or bulb of the lamps.

You can compute the approximate amount of current drawn from a battery
by a tungsten lamp, by dividing the candle-power by the voltage. The
result is the current in amperes. For example, a 6 volt, 12 candle-power
lamp will consume 12 divided by 6, or 2 amperes.

[Illustration: FIG. 156.—Connections for a 2.8 Volt Lamp.]

Storage batteries are rated by their output in *ampere hours*. An ampere
hour is the amount of current represented by one ampere flowing for one
hour. A forty ampere hour cell will deliver one ampere for forty hours,
4 amperes for ten hours or 5 amperes for eight hours. The ampere hour
capacity of a storage cell divided by the amount of current being used
will determine how long that current can be drawn before recharging is
necessary.

The maximum amount of current it is safe to draw from a storage cell
without impairing its life and efficiency is the maximum current which
that cell can deliver continuously for eight hours. In order to
determine this current simply divide the manufacturer’s rating of the
battery in ampere hours by eight. The answer is the maximum current you
should require from the battery if you wish to obtain good service from
it. For example, the maximum safe discharge rate of a 40 ampere hour
battery is 40 divided by 8 or 5 amperes.

[Illustration: FIG. 157.—A Miniature Base Tungsten Filament Battery Lamp
for small lighting.]

The method of computing the current required by a lamp and the method
for determining the maximum safe discharge rate of a battery will enable
you to figure the size of the smallest battery it is desirable to use in
a lighting plant.

Suppose that you intend to use three 6 volt 12 candlepower lamps. Each
lamp will require two amperes or a total of six when all three lamps are
burning at the same time. Six amperes multiplied by eight ampere hours
equals 48 ampere hours. This is the smallest size of battery which
should be used. If it is larger, it will be advantageous, because it
will supply the lamps a correspondingly longer time without recharging.

Figure 155 shows some of the sockets or receptacles which are on the
market. The illustration to the left is a "flat base receptacle." It
will be found most useful when the lamp is to be mounted directly on the
wall or ceiling. The weatherproof type of socket may be secured with
either a fibre or a porcelain shell.

[Illustration: FIG. 158.—A Tungsten Automobile Lamp with Ediswan Base.]

The brass shell socket is the best wherever appearance counts. It is
patterned after the standard Edison sockets and is made so that it will
screw onto several different sizes and styles of brackets which may be
mounted on either the ceiling or the wall. This type of socket is also
made with a small switch built inside so that the lamp may be turned on
or off directly at the socket.

*The Wire* used to connect the system will depend upon where the lamps
are located. Annunciator or office wire as it is sometimes called will
serve in most cases where the wires are to be run entirely indoors. The
largest size made is No. 16 B. & S. Gauge. This is the size which should
be used. Annunciator wire is made in various colors so that it can be
more easily concealed.

If the wires are run outdoors, or somewhat exposed to the weather, as on
a porch or in a barn, it is advisable to use weatherproof or rubber
covered wire. Lead covered twin conductor is recommended for use aboard
boats or wherever the wire is liable to abrasion.

[Illustration: FIG. 159.—Lamps Controlled by One Switch.]

If the lamps are larger than eight candle-power, or several are to be
used on the same line, the wires should be larger than No. 16. When a
battery is connected to a system of wires, the voltage at the end of the
line is much lower than it is at the battery terminals. This is due to
the resistance of the wire and is called "voltage drop." The lamps at
the end of the line will not burn as brilliantly as those close to the
battery. This can be partially overcome by using large wire.

The lamps may be either connected in series or in multiple. When a six
volt battery is used, it will be necessary to connect them in multiple.
Figure 159 shows how several lamps may be connected in multiple and
controlled by one switch. Figure 160 shows the same lamps with three
separate switches so that each lamp may be turned on or off
individually.

[Illustration: FIG. 160.—Lamps Controlled by Separate switches.]

It is possible to arrange a lamp and two switches so that it can be
turned on or off at either switch independently of the other. This is a
very convenient method of installing a light on a stairway or in a hall.
One switch may be placed at the top of the stairs and the other at the
bottom. A person going either up or down stairs can light the lamps
ahead and turn it out as he passes the last switch regardless of its
position at the other end.

The switches must be of the type called "two point" or "double throw
single pole" and the levers must always rest on one of the contacts and
never be left in between.

[Illustration: FIG. 161.—Double Control System.]

CHAPTER XVI. COHERER OUTFITS FOR WIRELESS TELEGRAPHY.

Making a Coherer. How to Adjust the Instruments.

MANY experimenters desire some device by which wireless signals may be
made clearly audible without the necessity of holding a telephone
receiver to the ear. It is not possible for the amateur to make such an
arrangement which will receive signals over long distances. It is,
however, possible to arrange a "coherer" so that signals coming from a
nearby station may be indicated by the ringing of a bell.

[Illustration: FIG. 162.—The Coherer Details.]

Such a "coherer" outfit will receive messages coming within a radius of
one mile and may also be used for demonstrating the principles of
wireless telegraphy when both the receiving and transmitting station are
located in the same room or building.

In order to secure these results it will be necessary to substitute a
device called a "coherer" for the detector in the receiving apparatus.

A coherer consists essentially of a few metal filings between two metal
plugs. The filings are made part of a circuit which includes a relay and
a battery. Under ordinary conditions the filings lie loosely together
and their resistance to an electric current is so great that they will
not allow enough energy to flow to operate the relay. If, however, the
two plugs are connected to the aerial and ground so that the currents of
the incoming wireless signals also pass through the filings, they will
suddenly "cohere" or stick together and permit sufficient current to
pass to operate the relay.

[Illustration: FIG. 163.—The Complete Coherer.]

A "tapper," or as it is also sometimes called a "decoherer," is also
arranged in the circuit so as to automatically shake the filings up and
restore them to their loose state as soon as each signal is received.
The decoherer consists simply of an ordinary bell mounted so that the
hammer will strike the coherer and jar it.

The first thing required in order to make a coherer is a pair of double
binding posts. These should be mounted on a wooden base six inches long
and four inches wide as shown in Figure 163.

A piece of glass tubing about one and one-half inches long and
one-eighth of an inch in diameter inside together with some brass rod
which will just slip into the tube tightly will be required.

Cut two pieces of the brass rod one and three-quarters inches long and
face off the ends perfectly square and smooth.

Slip these rods through the upper holes in the binding posts and into
the glass tube as shown in Figure 163. Be sure that everything lines up
perfectly and then remove one of the plugs.

Before putting the plug back in place put some nickel and silver filings
in the tube so that when the rods are pushed almost together, with only
a distance of three-sixty-fourths to one-sixteenth of an inch between,
the filings will about half fill the space.

[Illustration: FIG. 164.—Pony Type Relay.]

The filings are a mixture of silver and nickel and must be very
carefully prepared. The mixture should be nine-tenths nickel and
one-tenth silver. The filings may be secured by holding a five cent
piece over a clean sheet of paper and filing it with a coarse file. The
silver filings are made in the same way by using a ten cent piece or a
quarter in place of the nickel.

Do not use the fine dust and powder which is formed, but only the coarse
filings.

The success of the coherer will depend upon its adjustment and it will
probably be necessary for the beginner to experiment considerably to
find out just the right amount of filings to place in the tube and how
far apart the brass plugs should be placed.

The decoherer is made by removing the gong from an old electric bell and
mounting the bell on the base in the position shown in Figure 163. The
hammer should be bent so that it will tap the coherer lightly when a
battery is connected to the bell binding posts.

The only thing required to complete the apparatus is a relay.

A relay of the "Pony" type such as that shown in Figure 164 will serve
for ordinary work. It should be wound to at least 150 ohms, for to a
certain extent, the higher the resistance, the more sensitive it will
be.

When it is desired to secure the maximum possible distance with the
coherer a "polarized" relay will be necessary. A polarized relay is much
more sensitive than the ordinary sort. The polarized relay should be
wound to 1000 ohms.

[Illustration: FIG. 165.—Connections for the Receiving Set.]

Figure 165 illustrates how the coherer, decoherer and relay should be
connected. Two wires connected to the coherer posts lead to the magnets
of the relay in series with a single dry cell. The contact posits of the
relay are connected to the decoherer in series with another dry cell.

When wireless signals pass through the relay they will cause the
resistance to drop and allow sufficient current from the dry cell to
pass through the coherer to energize the magnets of the relay and draw
the armature in, thus closing the decoherer circuit. When the armature
of the relay is drawn in towards the magnets the relay contacts are
brought together. This closes the decoherer circuit and starts the
hammer to tapping the coherer, thus restoring the filings to their
former loose state. The decoherer will tap the coherer as long as the
incoming signals continue. By breaking the signals up into dots and
dashes of the telegraph code a message may be easily transmitted and
read from the tapping of the decoherer.

[Illustration: FIG. 166.—Coherer, Decoherer and Relay Connections.]

The best results are secured from a coherer outfit if it is connected to
the aerial and ground by substituting it for the detector in a circuit
employing a double slide tuning coil and a fixed condenser. The two
wires that would ordinarily be connected to the detector terminals are
simply connected to the coherer posts.

When the apparatus is to be used for demonstration or experiment and the
transmitting and receiving stations are both located in the same room or
house it will not be necessary to use an aerial and ground but merely to
attach two copper wires about 18 or 24 inches long to the opposite sides
of the coherer as shown in Figure 163.

In such a case the transmitter should be arranged as in Figure 167.

A spark gap made especially for this purpose is illustrated in Figure
168. Some of the details of the gap are shown in Figure 169.

[Illustration: FIG. 167.—How the Transmitter is Connected.]

The ball may be made in the form of a complete sphere or else consist
simply of half of one as illustrated. It should have a radius of about
five-eighths of an inch and arranged so that it may be mounted upon the
end of a "catch-wire."

[Illustration: FIG. 168.—The Complete Spark Gap.]

The "catch-wires" are mounted in two standards similar in construction
to a large binding post three and one-quarter inches high. The standards
should be mounted by screwing them on top of the secondary terminals of
the spark coil. The spark balls should be adjusted so that the distance
between them is not over one-eighth of an inch.

The coherer apparatus will probably require to be very accurately
adjusted before it will work properly.

Patience and a little experience will soon enable one to overcome the
difficulties and to put the apparatus in sensitive condition without
much trouble.

[Illustration: FIG. 169.—Details of Spark Gap.]

The coherer will be found to be the most sensitive when only a very few
filings are used.

The adjustment desired in the relay is the one in which the armature is
given the smallest possible amount of motion and the spring which pulls
the armature away from the magnets, the least tension.

The best method of finding the most sensitive adjustment for the
apparatus is to place the transmitting and receiving stations only a few
feet apart from each other in the same room. After you learn how to
adjust the coherer and relay properly you will then find that you can
move the transmitter quite a distance away from the coherer and it will
still operate.

Of course a coherer outfit is not very satisfactory and reliable for the
regular reception of wireless signals even over short distances because
of its irregular working. It is, however, very useful for sort of a
calling or signal outfit. It may be connected to the tuning coil by
means of a double-pole, double-throw switch and left in the circuit so
as to indicate by the working of the tapper when any of the other
stations in the near neighborhood are sending. The detector can then be
quickly inserted in the circuit in place of the coherer by throwing the
switch in the opposite direction and the signals read in the telephone
receiver.

CHAPTER XVII. HOW TO BUILD A TESLA HIGH FREQUENCY COIL.

IF the discharge from a Leyden jar or a condenser is passed through a
coil of wire acting as a primary and the primary is provided with a
secondary coil of a larger number of turns, a peculiar current known as
high frequency electricity is generated in the secondary. Such a device
is known as a Tesla Coil or Transformer.

[Illustration: FIG. 170.—Tesla Coil Circuits.]

When a Leyden jar or a condenser discharges through a coil of wire, the
spark which takes place does not consist simply of a single spark
passing in one direction only, but is really made of a number of
separate sparks passing alternately in opposite directions at the
tremendous rate of from one hundred thousand to one million times per
second.

A Tesla high frequency coil opens a field of wonderful possibilities to
the amateur experimenter and brings innumerable weird and fascinating
experiments within his reach.

The Tesla coil described in the following pages will give sparks of high
frequency electricity two or three inches long from the secondary, when
used in connection with a two inch spark induction coil. If used in
connection with a small high potential wireless transformer, the high
frequency discharge can be increased to six or eight inches.

A Tesla coil, suitable for use with a smaller spark coil, say one
capable of giving sparks from one-half to one inch in length can be made
by following the same plans but cutting all of the dimensions in half.
Make the secondary six inches long and one and one-half inches in
diameter instead of twelve inches long and three inches in diameter,
etc.

[Illustration: FIG. 171.—Secondary Tube.]

*The Secondary* winding consists of a single layer of No. 28 B. & S.
Gauge double cotton covered wire wound over a cardboard tube, twelve
inches long and and three inches in diameter. The tube must be
thoroughly dried before using it, by baking in an oven. A coat of
shellac, both inside and out, will avoid the possibility of having to
rewind the tube because of the wire becoming loose, due to drying out of
the tube later. The wire should be wound on in a smooth, even layer to
within about one-quarter of an inch from the ends and given a coat of
hot paraffine when finished. The ends of the tube are fitted with
circular wooden heads having a half inch flange.

*The Base* is a rectangular piece of wood, fifteen inches long and six
inches wide.

The secondary is supported in position by two hard rubber uprights, four
inches high, seven-eighths of an inch wide and one-half an inch thick. A
round-headed brass wood screw is passed through the top part of each of
the supports into the centre of each one of the wooden secondary heads.
High frequency currents are very hard to insulate and wood does not
possess sufficient insulating value to fit it for use as supports. Hard
rubber or glass are the most satisfactory materials for the supports.

[Illustration: FIG. 172.—Details of the Secondary Heads.]

The secondary terminals are connected to two brass rods, five inches
long and having a small brass ball at the upper end, mounted on the top
of each of the hard rubber supports.

The lower ends of the hard rubber supports are fastened to the base by
means of screws passing upwards through the base into a threaded hole in
the bottom of each support.

[Illustration: FIG. 173.—Details of the Primary Head.]

The secondary passes through the centre of the primary. The primary
consists of eight turns of heavy copper wire wound around a wooden drum
or frame. The wire should be No. 8 or No. 10 B. & S. Gauge. Flat copper
or brass ribbon one-quarter of an inch wide can be used in place of the
wire. The stranded copper wire, consisting of seven No. 22 B. & S. Gauge
wires twisted together and commonly employed for wireless aerials can be
used to good advantage in winding the primary, the idea of using a large
wire, stranded wire, or ribbon being to obtain a conductor having as
much surface as possible. High frequency currents travel only on the
surface of wires and conductors. A hollow tube is just as good a
conductor for high frequency currents as a solid rod of the same
diameter.

[Illustration: FIG. 174.—Primary Cross Bar.]

[Illustration: FIG. 175.—Front View of the completed Tesla Coil.]

[Illustration: FIG. 176—Side View of the completed Tesla Coil.]

The heads of the primary drum are wooden rings, seven inches in diameter
outside, four and one-half inches inside and one-half an inch thick. Six
cross bars, two and one-half inches long, three-quarters of an inch
thick and one-half an inch wide are required to support the wire. They
are spaced equidistantly around the rings and held in position by means
of brass screws passing through the rings. Do not use iron screws,
because iron is magnetic and should be entirely avoided in the
construction of a Tesla coil. Small notches should be cut in the outside
edge of the cross bars to accommodate the wires. The wires should pass
around the drum in the form of a spiral with one-quarter to
five-sixteenths of an inch space between the turns. The completed drum
will somewhat resemble a squirrel cage. The ends of the primary winding
should terminate in two large binding posts mounted on the primary
heads. The heads are fastened to the centre of the base by a couple of
large wood screws passing upwards though the bottom.

[Illustration: FIG. 177.—Diagram of connections for operating the Coil.]

The illustration in Figure 177 shows how to connect the Tesla coil. The
primary should be in series with a condenser and a spark gap. The
condenser should consist of two or three Leyden jars or several glass
plates coated with tinfoil. It is impossible to determine just how much
capacity the condenser should have in advance, because the length of the
conducting wires, adjustment of the spark gap, etc., will have
considerable effect. The condenser is connected directly across the
terminals of the spark coil. The spark gap may consist of two one-eighth
inch brass rods supported by two double binding posts mounted on a small
wooden block.

The induction coil should be as large as possible. When the coil is set
in operation it will charge the condenser and a white, snappy spark
should pass across the gap. If the fingers are brought near to one of
the secondary terminals of the Tesla coil, a small, reddish purple spark
will jump out to meet them. It will be necessary to adjust the apparatus
very carefully before a spark of any considerable length can be
obtained. Changing the length of the spark gap and the size of the
condenser will undoubtedly produce results. It may also be possible to
lengthen the high frequency spark by disconnecting one of the wires from
the primary binding posts on the Tesla coil and connecting the wire
directly to some one of the primary turns. A very small change in some
one of the connections may produce considerable result. The purpose of
the adjustments is to tune the circuit in the same manner that a
wireless outfit is tuned by altering the capacity of the condenser or
varying the number of turns in the helix.

[Illustration: FIG. 178.—Plate Glass Condenser.]

There are many interesting experiments which may be performed with the
aid of a Tesla coil which space does not permit of describing here. The
weird and strange beauty of the Tesla discharge is most evident when it
takes place in the dark.

High frequency currents do not produce a shock. If you hold a piece of
metal in your hand and bring it near one of the secondary terminals, you
can take the shock of a high-frequency coil, throwing a spark several
inches long without feeling any sensation except that of a slight
warmth.

CHAPTER XVIII. AN EXPERIMENTAL WIRELESS TELEPHONE.

Many of the readers of this book are probably "wireless experimenters"
who have constructed their own wireless telegraph apparatus, but not
many have ever built a wireless telephone set. The arrangement described
in the following chapter may be built by almost any boy and will prove a
very interesting and instructive piece of apparatus. It is of no real
practical value as a wireless telephone, owing to the fact that the
distance over which it will transmit intelligible speech is limited to
150 to 300 feet. However if you have a chum who lives next door or
across the street or within the distance named above, it is easily
possible for you to construct a wireless telephone which will enable you
to remain in your own rooms and hold a conversation with each other,
without any connecting wires.

[Illustration: FIG. 179.—When a Bar Magnet is plunged into a Hollow Coil
of Wire, a Momentary Current of Electricity is Generated.]

The instruments depend for operation upon what is known as magnetic
induction. Michael Faraday, who was a famous English scientist,
discovered in 1831 that if a magnet is suddenly plunged into a hollow
coil of wire, a momentary current of electricity is generated in the
coil. You can try this experiment for yourself by connecting a
galvanometer with a hollow coil of wire and then suddenly plunging a bar
magnet into the coil.

If you observe closely you will notice that the needle of the
galvanometer is deflected, this indicating that a current has passed
through the circuit. The galvanometer should of course be far enough
away so that the needle is not affected directly by the magnetism of the
bar magnet itself.

[Illustration: FIG. 180.—Magnetic Phantom showing the Lines of Force
about a Bar Magnet.]

As long as the bar magnet is motionless, it will not induce any current
in the coil. As soon as it is moved however, the currents are set up.
The mechanical work done in moving the magnet is really the source of
electrical energy. The medium which changes the mechanical energy into
electricity is called the magnetic field. The real nature of a magnetic
field is very hard to explain and not easily understood. It is a
peculiar state or condition of the space in the immediate neighborhood
of a magnet. It is possible to show its existence by placing a sheet of
cardboard over a magnet and then sprinkling iron filings over the
surface of the cardboard. If the cardboard is tapped slightly, the
filings will settle down in curving lines, forming a magnetic "phantom."
The curved lines into which the filings form themselves, represent the
paths of the lines of force which make up the magnetic field. The
illustration in Figure 180 shows the magnetic phantom about a bar
magnet.

When the space in the neighborhood of a wire or a coil of wire through
which a current of electricity is passing is examined by means of some
iron filings sprinkled on a sheet of cardboard, it is found that a
similar state of affairs exists there and that it also possesses a
magnetic field.

This can be readily shown by punching a small hole in the centre of a
sheet of cardboard or stiff paper and passing a wire which is carrying a
strong current of electricity through the hole at right angles to the
surface of the cardboard. Sprinkle some iron filings on the cardboard
and they will arrange themselves in circles around the wire, forming a
magnetic phantom giving definite proof to the eyes of the existence of
the magnetic field.

Some of my readers may have begun to wonder what a magnetic field has to
do with the operation of the wireless telephone. It has already been
explained that this particular type of wireless telephone depends upon
magnetic induction for its operation. It is necessary to have some sort
of a conception of the magnetic field before you will be able to
understand magnetic induction.

[Illustration: FIG. 181.—Magnetic Phantom about a Coil of Wire carrying
a current.]

In order that you may gain an idea of how the instruments work, suppose
that two coils of wire, A and B, are connected as shown in Figure 182.
The coil A is connected in series with a set of batteries and a
telegraph key. The other coil B is connected to a telephone receiver.
The coils are placed parallel to each other and only a few inches apart.
When the key is pressed so that the circuit is complete and the battery
current flows through the coil A, it creates a magnetic field in the
vicinity of the coil and lines of force are set up in the immediate
neighborhood.

The lines of force will travel through and about coil B and *induce in
it a current of electricity*. The electric current will cause a sound
like a click in the telephone receiver. When a telephone transmitter is
substituted for the key and words are spoken into the mouthpiece, the
current passing through the coil from the battery will be varied in
accordance with the vibrations of the voice. The changes in the current
will produce changes in the magnetic field set up by the coil and the
changes in the magnetic field will produce a varying current in the coil
B so that the words will be distinctly repeated by the receiver
connected to B.

[Illustration: FIG. 182.—Illustrating the Principle of the Induction
Wireless Telephone.]

This experiment is very easy to perform and may be carried out by almost
any boy with the materials he probably already has around his shop.
Twenty-five to thirty turns of magnet wire of almost any size wound
around one end of a cardboard tube three or four inches in diameter will
serve as the coil A. A similar coil wound around the tube five or six
inches away, an ordinary telephone transmitter and receiver and two or
three dry cells form all the rest of the equipment desired. Words spoken
into the transmitter connected to the coil A will be distinctly heard in
the telephone receiver connected to the coil B, although there is no
connection between the two coils other than the *magnetic field*. Such
an outfit as this is of course only experimental and intended solely for
the purpose of demonstrating the principles of operation of the larger
outfit. If it is desired to make a practical set for talking over a
considerable distance it will be necessary to make coils much larger in
diameter and to build them so they contain a larger number of turns.

[Illustration: FIG. 183.—Showing how the Coils may be formed by winding
around nails set in a circle in the Floor.]

Large coils can be made by drawing a circle about four feet in diameter
on the floor of your shop. Then drive a number of small nails around the
circle about three inches apart. This arrangement will serve as a form
to wind the coil. After the winding is completed you can pull a few of
the nails out and lift it off and you will have a circular coil four
feet in diameter. Two coils will be required. They should be made of No.
20 B. & S. Gauge cotton covered wire. Each coil should contain about
seventy-five turns of wire. About three pounds of wire will be required
for each coil. After winding the coils should be tied with string or
tape about every six inches so that they will not come apart. The nails
can then be pulled out of the floor and the coil is ready for use. If it
is intended to subject the coils to any amount of handling, it is a good
idea to secure two large hoops such as girls use for rolling along the
sidewalk, about four feet in diameter. Then make the coils exactly the
same diameter as the hoops and when they are finished bind them to the
hoops with tape. Two binding posts may be mounted on each of the hoops
and the terminals of the coil connected to them.

Two coils are required in order to establish a complete wireless
telephone system, one at each station. Each coil may be used for both
sending and receiving messages. Each station should be arranged as in
Figure 184. The transmitter should be of the type known as "long
distance." The switch is a two point switch.

[Illustration: FIG. 184.—Circuit Diagram showing how the Coil is
connected so as to serve for either transmitting or receiving.]

It is a good plan to use two telephone receivers mounted on a head band
so that both ears can be used and the hands left free to manipulate the
switch. If a set of telephone receivers wound to a high resistance for
wireless telegraph purposes is used it will greatly increase the range
of the outfit.

Six to eight first class dry cells will be required to form the battery.
A push button is placed in series with the transmitter so that the
battery current will be consumed only when the button is pressed. This
makes it necessary to push the button when sending a message. When the
lever of the two point switch rests on the contact A the circuit is
completed for transmitting. When the lever rests on B the telephone
receivers are connected to the coil and the apparatus is ready for
receiving a message.

If the apparatus is used only for demonstrating purposes, a camera
tripod will be found very convenient for supporting the coils. The
transmitter and switch can be fastened to the top of the tripod and the
batteries placed in a box on the ground. It is absolutely necessary that
the coils be perfectly parallel to each other when messages are being
transmitted back and forth. It is well to start with the coils
comparatively close to each other, say ten or twelve feet at first, and
then gradually increase the distance.

Coils approximately four feet in diameter and containing about
seventy-five turns of wire will transmit and receive messages about one
hundred and fifty feet. The range can be increased slightly by using
more batteries. If too much battery is used, however, the telephone
transmitter will become very hot and is liable to burn out.

It is impossible, of course, to "call up" over a set of wireless phones
such as these. If you succeed in getting your set to work satisfactorily
with your chum across the street and wish to talk to him it will be
necessary for you to arrange some predetermined time.

In order to operate your phone place the switch lever on the contact A.
Hold your finger tightly against the push button so that the circuit is
completed and talk slowly and distinctly into the transmitter. The
transmitter will operate the best when the mouthpiece points on a level
with your mouth. The lips should be about one inch away from the
mouthpiece. Speak in a low even tone. The switch at your friend’s
station should be resting on B. When you finish speaking throw your
switch to B and listen in your telephone receivers. The operator at the
other station should throw his switch to A and push the button. He may
then talk to you.

CHAPTER XIX. MISCELLANEOUS EXPERIMENTS AND APPARATUS.

ELECTROLYSIS.

Liquid which will conduct a current of electricity is called an
*electrolyte*. All electrolytes are compounds, that is, they consist of
more than one substance. When an electric current passes through a
liquid it decomposes it. This process of decomposition is called
*electrolysis*.

Pure water is not a conductor of electricity. If sulphuric acid is added
to water, the mixture become an electrolyte and will conduct. If an
electric current is passed through water containing sulphuric acid, it
will decompose the water.

[Illustration: FIG. 185.—Apparatus for Electrolysis Experiment.]

Water is composed of oxygen and hydrogen and so bubbles of oxygen and
hydrogen gas will rise from the liquid.

Figure 185 illustrates a very simple arrangement for decomposing
acidulated water into oxygen and hydrogen gases.

It consists of a bottle with the bottom broken out, and provided with a
cork fitted snugly into the neck. Two glass tubes pass through the cork.
A small piece of platinum wire is sealed into the inside end of each
glass tube. The platinum wires are connected to copper wires leading out
of the lower ends of the tubes.

If the bottle is inverted and filled with a dilute solution of sulphuric
acid, the current from two or three dry cells will decompose the water.
The battery should be connected to the wires running through the glass
tubes.

Bubbles of gas will rise from the platinum wires. Oxygen gas will rise
from the positive wire or electrode and hydrogen gas from the negative
electrode.

If two test tubes are filled with acidulated water and then inverted
over the wires, the tubes will collect the gas. In a few minutes it will
be noticed twice as much hydrogen as oxygen has been generated.

If copper or brass electrodes &re used the acid will attack the positive
one and a chemical action will take place which will prevent the
liberation of any appreciable amount of oxygen, unless an excessive
amount of current is passed through.

ELECTROPLATING.

Electroplating consists of coating bodies with metal by means of an
electric current.

The proper chemicals, a small tank and a suitable source of current are
the only apparatus required. The process may be outlined as follows:
Thoroughly clean the article to be electroplated so as to remove all
grease and dirt. Attach it to the negative pole of the battery and
suspend it in an electrolyte composed of some chemical salt of the metal
to be deposited. In order to maintain the strength of the solution, a
piece of metal of the kind to be deposited is attached to the positive
electrode.

A tank for plating small articles such as keys, rings, knives, etc., may
be made out of a square glass battery jar by providing it with a wooden
moulding fitted around the top edge to support the conductor rods. The
rods are made of brass or copper and are threaded at one end so as to be
provided with binding posts. The centre rod is the one from which the
articles to be plated are suspended. They should be attached to it by
means of a thin copper wire. The two outside rods support the anodes.
The anodes are sheets of metal of the kind to be deposited which, in the
case of copper plating, would be copper, in a case of silver plating
silver, nickel for nickel plating, etc.

[Illustration: FIG. 186.—Electroplating Tank.]

Objects which are to be plated must be free from all traces of dirt or
grease or the plating will not be uniform because it will not stick to
the dirty spots.

Articles made of plaster, wax, etc., which are not conductors of
electricity can be plated by first covering with powdered graphite.
Articles of iron, steel, zinc and tin cannot be silver or gold plated
unless first covered with a thin coating of copper.

A single storage cell is an excellent source of current for
electroplating. A rheostat should be placed in the circuit so that the
current can be regulated. The negative pole should be connected to the
centre rod from which the articles are suspended. The positive pole is
connected to the rods supporting the anodes.

The tank should be filled with electrolyte to within about an inch of
the top. The articles to be plated and also the anodes should be
completely submerged.

The electrolyte used for copper plating is simply a solution of copper
sulphate in water. The electrolyte for nickel plating is composed of one
part of nickel sulphate dissolved in twenty parts of water to which one
part of sodium bisulphate is added.

Articles which have been electroplated must be buffed to give them a
bright polish.

ELECTRIC CURRENT GENERATED BY HEAT.

If the point of contact between two dissimilar metals is heated, a
current of electricity will be generated.

This principle was discovered nearly one hundred years ago by a
scientist named Seebeck, and has resulted in many attempts on the part
of inventors to utilize the heat of the sun’s rays in producing
electricity.

[Illustration: FIG. 187.—Generating Electric Current by Heat.]

An interesting experiment illustrating the production of electricity by
heat can be easily performed with very simple apparatus. An alcohol
lamp, candle or source of heat, a piece of copper, a steel needle and a
galvanometer or a telephone receiver are all that are necessary.

The galvanometer or the telephone receiver, whichever is used, is for
the purpose of detecting the electric current.

Connect the needle and the piece of copper, which should preferably be a
small sheet, to the galvanometer or telephone receiver. Hold the copper
sheet over the flame of the alcohol lamp until it is quite hot and then
touch the hottest portion with the point of the needle. Enough current
will be generated to produce a click In the telephone receiver or to
cause the galvanometer needle to move. The needle should be pressed
against the copper tightly enough so that the point cuts through the
scale or oxide on the surface and makes a good electrical contact with
the metal underneath.

Various devices for the production of electricity consisting of a large
number of strips of dissimilar metals in contact with one another and
arranged so that they can be easily heated have been invented. They are
called "thermopiles."

A HANDY LIGHT.

Figure 188 shows a simple and handy form of light which utilizes the
current from a home made primary cell. It consists of a glass fruit jar,
fitted with a tight wooden top. A miniature porcelain socket and a 1.5
volt tungsten lamp are mounted on top.

The battery is arranged so that the zinc element can be drawn up out of
the solution when the light is not in use and any waste thereby
prevented. The zinc electrode consists of a strip of that metal fastened
onto the lower end of a brass rod by means of two threaded nuts. The
upper end of the rod passes through a small metal collar on the top of
the cover, provided with a thumb-screw so that when the electrode is
lifted up out of the solution it may be clamped firmly in that position.

The zinc strip should not be so long that it will not clear the solution
when raised up if the jar is about half filled.

[Illustration: FIG. 188.—A Handy Light.]

The positive electrode is a battery carbon mounted on the lower end of a
brass rod. The brass rod in this case is not movable because the carbon
can remain in the solution indefinitely without any waste.

The joint between the brass rods and the electrode should be coated with
paraffine so that the chemicals in the solution will not cause any
corrosion. The rods should be connected to the lamp socket. When the
zinc is lowered into the solution, the lamp will be lighted by the
current generated.

The electrolyte should be that described as the "bichromate" solution on
page 34 of Vol. I of this book.

AN EXPERIMENTAL ARC LAMP.

An arc lamp is operated by causing an electric current to pass between
two carbon rods. If the voltage is high enough, carbon vapor will form
between the rods when they are separated a short distance. It requires
an E. M. F. of approximately fifty volts to produce and maintain an arc.

A six volt storage battery will heat a pair of sharp pointed carbons to
incandescence and produce a light somewhat similar to the electric arc.

[Illustration: FIG. 189.—Experimental Arc Lamp.]

Ordinary carbon rods such as those used in flashlight batteries will
serve very nicely for a "battery arc lamp." The ends should be filed to
sharp points. Figure 189 shows a simple method of mounting the carbons.
The lower one is soldered to a piece of brass strip by taking advantage
of the brass cap pressed over the upper end of flashlight battery
carbons.

The upper carbon is mounted on the forward end of a brass lever which is
pivoted near the back end so that an adjustable counterweight may be
used to regulate the pressure on the point of contact between the two
carbons.

If the carbons are touching lightly and are connected to a strong
battery of six volts or more, the point of contact will be heated to
incandescence and will produce a dazzling white light.

A real arc lamp for operation on the 110 volt current, in series with a
bank of lamps, may be constructed on this same scheme by using larger
carbons and eliminating the counterweight. The upper arm should be
pivoted in the same manner but should move stiffly so that it will
remain in any position in which it is set.

If the 110 volt current is used, the carbons should be brought together
and then separated a short distance. The current will continue to flow
across and will form an arc producing a very powerful purplish white
light. The arc will consume the carbons quite rapidly and also generate
a great deal of heat. Therefore if it is intended to use the light for
any length of time it is advisable to fasten the carbons by means of a
clamp so that they may be easily replaced.

A MAGNETIC DIVER.

This is a mystifying piece of apparatus to those who do not know its
secret. The little diver apparently travels up and down from the bottom
of a jar full of water to the surface at a word of command.

The diver consists of a small glass test tube about two inches long
having the figure of a man painted upon it. The lower end is closed by a
very small cork through which is pushed a large iron tack with the head
on the outside. The test tube contains just enough water to float head
up even with the surface of the water. The exact amount of water
required to just permit enough buoyancy for the diver to rise again to
the surface after he has been to the top will have to be determined by
careful experiment.

The jar containing the diver should be set on a table having a drawer in
which a pair of powerful electromagnets can be placed directly under the
jar. The electro-magnets are connected to a strong battery and a switch
located under the rug or carpet and so arranged that it may be closed by
stepping on it lightly and without attracting attention. If the diver
does not have too much bouyancy the attraction between the tack and the
electro-magnets when the switch is closed should be sufficient to cause
him to descend to the bottom of the jar. When the current is turned off
the diver should rise again.

[Illustration: FIG. 190.—The Magnetic Diver.]

THE MAGNETIC FISH.

The same sort of a scheme employed in the Magnetic Diver may be used for
producing a magnetic fish which will swim around and around a pan of
water.

[Illustration: FIG. 191.—The Magnetic Fish.]

It consists of a small wooden fish having a magnetised sewing needle
attached to the under side. The fish is placed in a bowl of water on a
table having a drawer in which a pair of electro-magnets mounted on a
rotating wooden arm may be placed so that they swing around directly
underneath. A piece of strong twine wrapped around an empty spool and
attached to the centre of the arm makes it possible to rotate the
magnets by pulling on the string. When the magnets are connected to a
battery they will exert a strong magnetic pull upon the needle fastened
to the fish and if slowly rotated will cause the latter to follow slowly
around the bowl.

A MAGNETIC CLOWN.

Small figures of men or animals cut out of sheet iron will perform many
amusing acrobatic feats when under the influence of a magnet.

[Illustration: FIG. 192.—The Magnetic Clown.]

Such figures are easily cut out of an old tin cracker box with a pair of
snips or strong shears. A realistic appearance may be secured with the
aid of a little paint.

A tin clown having a sharply pointed hat, hands and feet will do all
sorts of stunts when hanging from the poles of a horseshoe magnet. If
several clowns are made they can be caused to hold hands, stand on each
others heads, jump up in the air, etc.

AN ELECTRIC BREEZE.

If a sewing needle is connected to one of the discharge rods of a static
machine and the point of the needle is presented to the flame of the
candle while the machine is in operation, the flame will be repelled
just as if a breeze or current of air were issuing from the needle. This
is caused by the "brush" discharge which takes place whenever high
voltage electricity has a chance to escape from a sharp point or edge.
The brush discharge will be much more marked if the condensers or Leyden
Jars are not connected to the discharge rods. The "electric breeze" can
be felt if the point of the needle is brought near to the side of the
face. It is necessary that the needle and the wire connecting it to the
static machine be very carefully insulated from all surrounding objects
which might dissipate the electricity before it has an opportunity to
escape from the needle point.

[Illustration: FIG. 193.—An Electric Breeze.]

A STATIC MOTOR.

This is a motor operated by the electricity from a static machine. It
does not possess any appreciable amount of power and must be very
carefully built and balanced in order to operate.

It consists of four celluloid "ping-pong" balls, B, B, B, B, covered
with tinfoil and mounted on opposite ends of two wooden spokes. The
balls should be at right angles to each other as shown in the
illustration. The spokes pass through a cork. The cork is mounted on a
wire spoke or knitting needle passing through its centre and supported
in small notches in the top of two upright wooden bearings. The device
must be very carefully balanced so that the slightest impulse will cause
it to spin and so that there will not be any dead centre.

The upright bearings are mounted on a wooden base. Two other tinfoil
covered balls A, A, are supported on glass or rubber insulating rods at
opposite ends of the base on a level with the axle and in such a
position that the balls B, B, B, B, almost touch A and A as they swing
past.

[Illustration: FIG. 194.—The Static Motor.]

Connect A and A each to one discharger rod on the Wimshurst machine.
Start the machine and give the axle of the static motor a twist. As the
balls B, B go past A and A they will receive a charge of electricity
which will cause them to repel each other until they have swung past the
other ball on the opposite side and discharge their electricity in
return for a charge of the opposite sign.

Any of the Following

Practical Books

*will be sent At Once, Post-paid on receipt of price.*

_There is very little danger of losing currency in a letter if the
following directions are observed:_

Cut a circular hole the diameter of

the coin in a piece of cardboard, of

sufficient size to fit closely in the

envelope. The cardboard should

be no thicker than the coin.

Insert the coin in the hole and paste

a piece of paper on both sides of

the cardboard to prevent the coin

from falling out.

COLE & MORGAN

Publishers of the Arts and Sciences Series

P.O. Box 473 New York, N. Y.

*The Boy Electrician*

Practical Plans for Electrical Toys and Apparatus, with an Explanation

of the Principles of Everyday Electricity.

*By ALFRED P. MORGAN.*

Author of "Wireless Telegraph Construction for Amateurs" and "Wireless

Telegraphy and Telephony," etc.

*With full-page Illustrations and 324 Working Drawings and Diagrams*

*by the author. 8vo., Cloth, Net Price, $2.00.*

This is the age of electricity. The most fascinating of all books for a
boy must therefore be one dealing with the mystery of this ancient force
and modern wonder, even a mere list of whose services is impossible. The
best qualified of experts to instruct boys, Alfred P. Morgan, has in a
book far superior to any other of its kind told not only how to make all
kinds of motors, telegraphs, telephones, batteries, etc., and to do so
economically, but has explained the principles upon which these depend
for operation, and how the same thing is done in the every-day world be
well presented and so attractive is this really great book that it will
be an education for any bright boy to have it, as well as the best kind
of a moral safeguard, by leaving no time or thought for evil, and a
means of future benefit beyond the power of any one to reckon. Glancing
over the pages of this book, one cannot but be impressed by the
excellent illustrations, clearness of expression and the large number of
subjects that are covered. It is beyond doubt the best book in this line
that has ever been written or published. It is a book that will delight
every boy who has a leaning towards electrical experiments. The author
writes in a clear and chatty style and while he has a thorough technical
knowledge of his subject he has succeeded in treating it in a simple
manner so that it is readily intelligible to his young readers.

*Among the Chapter Headings and Contents are:*

Magnets and Magnetism—Static Electricity—Static Electric Machines—Cells
and Batteries—Electro-Magnetism and Magnetic Induction—Electrical
Units—Electrical Appurtenances—Electrical Measuring Instruments—Bells,
Alarms and Annunciators—Electric Telegraphs—Microphones and
Telephones—Induction Coils—Transformers—Wireless Telegraphy—Wireless
Telephony—Electric Motors—Dynamos—An Electric Railway—Miniature
Lighting—Miscellaneous Electrical Apparatus.

*READ WHAT HAS BEEN SAID OF IT.*

"Even a casual glance through the many pages of the book does not fail
to emphasize the fact that Mr. Alfred P. Morgan has indeed succeeded
well in giving the juvenile electricians a work that has long been
sought."—Popular Electricity.

"We have no hesitation in commending the book to the attention of the
juvenile audience for which it is intended."—Boston Post.

"A great book for enterprising boys. Bright boys will highly appreciate
it and feel like thanking the wideawake publishers for putting such a
reliable and interesting work in the field."—New Haven Journal.

"The book covers the subject of electricity thoroughly in all its phases
and is a splendid acquisition to any boy’s library."—Detroit Times.

"In this age of electricity a book like the present one is both
fascinating and valuable especially to boys. The book is attractive with
its many illustrations and will prove of much educational value for any
bright boy."—Zion’s Herald.

"This is an admirably complete and explicit handbook for young boys who
fall under the spell of tinkering with electrical apparatus."—Boston
Transcript.

"Well presented and attractive this book will be a source of great
benefit and delight for any bright boy."—New Orleans Times-Picayune.

*Price, $2.00, Postpaid*

COUNTLESS OTHER MAGAZINES, NEWSPAPERS AND LIBRARIES HAVE

ENDORSED THIS GREAT BOOK. SEND FOR A COPY NOW.

*If you are interested in this great book, write for our 8-page special*

*descriptive circular.*

*Experimental Wireless Construction*

*EIGHTY-SIX PAGES NINETY-THREE ILLUSTRATIONS*

*Only 25 Cents, Postpaid*

Here at last is the book which every young experimenter interested in
constructing his own wireless apparatus has been looking for.

A book which tells how to build apparatus which anyone would be proud to
own. It is a more advanced book than "Wireless Construction and
Installation for Beginners," and describes apparatus which is much more
elaborate and sensitive. The instruments have all been the subject of
considerable experimental work and study. All the apparatus has been put
to practical test and carefully improved by clever experts. By
purchasing this book you get the benefit of vast knowledge and
experience and are enabled to build far better instruments than by
following your own designs and haphazard methods.

THE TREMENDOUS POPULARITY OF THIS VALUABLE LITTLE BOOK IS ONLY AN
INDICATION OF ITS GREAT WORTH.

It has only been on the market a short time, yet the sales will
undoubtedly soon reach a point which would indicate that experimenters
unquestionably consider, that in proportion to its size, it is the best
book on the market.

It does not describe any old or obsolete forms of wireless apparatus but
only the latest types of aerials, spark coils, keys, gaps, condensers,
helixes, oscillation transformers, loose couplers, tuning coils,
detectors, loading coils, variable condensers, aerial switches, etc.

IT IS ONE OF THE MOST DETAILED AND THOROUGH BOOKS EVER PUBLISHED.

The information is all intensely practical. Complete directions and
dimensions are given. Nothing is left to be guessed at. The book must
really be seen to be appreciated.

*Partial Contents*

Chapter I.—THE AERIAL. The Location of the Station. The Construction of
an Operating Bench. The Aerial and Ground. The Supports or Masts. Types
of Aerials. How to Erect an Aerial. Protection from Lightning, Etc.

Chapter II.—SPARK COILS. The Construction of Spark Coils. A 1/4-inch
Spark Coil. A 1/2-inch Spark Coil. A 1-inch Spark Coil. A 1 1/2-inch
Coil. A 2-inch Coil. Sources of Current. Dry Cells. Storage Cells.
Wireless Keys, Etc.

Chapter III.—TRANSMITTING APPARATUS AND ITS CONSTRUCTION. Step-down
Transformers. Spark Gaps. The Oscillation Condenser. Leyden Jars.
Helixes. Oscillation Transformers, Etc.

Chapter IV.—THE RECEIVING APPARATUS AND ITS CONSTRUCTION. A Silicon
Detector. A Galena Detector. The Double Slide Tuning Coil. How to Make a
Fixed Condenser. Building a Loose Coupler. The Loading Coil. How to Make
a Variable Condenser, Etc.

Chapter V.—ARRANGEMENT AND OPERATION OF THE APPARATUS. Aerial Switches.
The Buzzer Test. Using More Than One Detector. Shunting the Detector.
Complete Outfits. Portable Sets. The Operation of the Station, Etc.

*LESSONS IN WIRELESS TELEGRAPHY*

FOURTH EDITION

72 Pages 66 Illustrations

A systematic course in the elementary principles. Written so you can
understand it. In 35 lessons.

1.—Magnetism. 2.—Magnetic Induction. 3.—Primary and Secondary Cells.
4.—Electric Currents. 5.—Electromagnetism. 6.—Dynamo-Electric Machinery.
7.—The Induction Coil. 8.—The Transformer. 9.—Leyden Jars and
Condensers. 10.—Electromagnetic Theory. 11.—Electric Waves.
12.—Principles of Wave Telegraphy. 13.—The Aerial. 14.—The Wireless
Coil. 15.—The High Potential Transformer. 16.—The Oscillation Condenser.
17.—The Helix. 18.—Spark Gaps. 19.—The Key. 20.—Aerial Switches.
21.—Anchor Gaps. 22.—Detectors. 23.—Tuning Coils. 24.—Loose Couplers.
25.—Fixed Condensers. 26.—Variable Condensers. 27.—Telephone Receivers.
28.—Hot Wire Ammeter. 29.—Potentiometer. 30.—Dead End Losses and
Switches. 31.—Distributed Capacity. 32.—Poulsen Arc. 33.—Receiving
Undamped Waves. 34.—The Audion Amplifier. 35.—Hook-Ups.

*Price, 25 Cents, Postpaid*

If you want to understand your apparatus and how it works, you will need
this book—over 15,000 copies in use.

*Price, 25 Cents, Postpaid*

*Model Flying Machines*

*HOW TO BUILD AND FLY THEM*

Will prove interesting and valuable.

Have you ever built and flown a Model Racer?

If not, you have missed something.

Price, 25 Cents, Postpaid.

Model Aeroplaning is one of the most fascinating and instructive of
sports.

Thousands of young men and boys have formed Model Aero Clubs and
organized Flying Contests throughout the country.

"MODEL FLYING MACHINES" of the _Arts and Sciences_ series is the only
book giving reliable data and instructions for the construction of
practical Model Aeroplanes.

IF YOU ARE A BEGINNER, this is the book that you ought to have. It will
start you right. It tells how to build seven different types of
machines, starting with the simplest Monoplane and finishing with
several Long Distance Racing Models.

IF YOU ARE INTERESTED IN MODEL AEROPLANING, this book will prove the one
you have been looking for. Gives valuable "Kinks". Tells how to carve
propellers, make winders, adjust and fly machines, etc. Fully
illustrated with large size, detailed working drawings, showing the
exact size of each part. Twelve full-page plates.

Printed on first-class paper. Heavy cover in three colors.

Sent postpaid by return mail upon receipt of 25 cents.

*EVERY MODEL AVIATOR OUGHT TO HAVE A COPY*

*Wireless Construction and Installation for Beginners*

SEVENTY-THREE PAGES SIXTY-SEVEN ILLUSTRATIONS.

(Second Edition.)

A Practical Handbook giving detailed instructions for the Construction
and Operation of a Boy’s Wireless Outfit.

*Only 25c. Prepaid*

An indispensible book for the young wireless experimenter. It not alone
shows how to build the various instruments but describes their actual
workings and tells how to operate them.

*EVERY BOY IS ADVISED TO*

*SEND FOR A COPY*

Written in a very clear and simple style, the book is invaluable to a
beginner. He will be able with its aid to construct simple apparatus of
the latest and approved type. The instruments described in the book have
been the subject of considerable experimental work and special study.
They are modeled along simple lines so that they will be easy and
inexpensive to construct, but at the same time combine features which
make them very sensitive and capable of receiving or transmitting
messages greater distances than some more complicated apparatus.

*THIS BOOK, CONSIDERING ITS WORTH, IS A GIFT AT 25c.*

There are no old or obsolete forms of wireless apparatus discussed, but
only the latest types of tuning coils, receiving transformers, fixed
condensers, keys, spark coils, detectors, etc. The book is illustrated
by numerous detailed working drawings giving all dimensions. Several
full-page views of the apparatus enable the beginner to fully comprehend
the text.

*THE MOST THOROUGH AND COMPLETE ELEMENTARY WIRELESS*

*CONSTRUCTION BOOK PUBLISHED*

The pages on the construction and installation of aerials will be found
to be of considerable help to the experimenter, for it is here that the
most trouble is experienced by the beginner. The practical and helpful
information on this subject is alone worth several times the cost of the
book.

*PARTIAL CONTENTS*

Chapter I.—*WIRELESS TELEGRAPHY*. An intensely interesting subject;
amateur wireless telegraphy; the purpose of the aerial and ground; the
apparatus used to send messages; the apparatus used to receive messages.

Chapter II.—*AERIALS AND GROUNDS*. Where to put up the aerial; types of
aerials; the "T" aerial; the masts; the wire; insulators; leading in the
wires; the ground.

Chapter III.—*HOW TO BUILD AND OPERATE THE SIMPLEX DOUBLE SLIDE
RECEIVING OUTFIT*. The tuning coil; the tube; the sliders; the fixed
condenser; the detector parts; assembling the set; connecting the
instruments; operation.

Chapter IV.—*HOW TO BUILD THE SIMPLEX LOOSE COUPLER, DETECTOR AND
CONDENSER*. The base; the primary; the secondary; the pillar; the
switch; How to make the Simplex cat whisker detector; How to make the
Simplex fixed condenser; How to connect the apparatus; How to tune with
the loose coupler; How to adjust the detector.

Chapter V.—*TELEPHONE RECEIVERS AND HEADBANDS.*

Chapter VI.—*HOW TO BUILD THE SIMPLEX SPARK COIL.* The core; the
secondary; the condenser; the coil heads; the base; the interrupter
parts; the bridge.

Chapter VII.—*HOW TO MAKE THE SIMPLEX KEY*.

Chapter VIII.—*HOW TO CONNECT AND OPERATE THE APPARATUS*. How to connect
and operate a complete wireless station; How to operate; the code, etc.

*Three New Books on Home Made*

*Electrical Apparatus*

The Book you are now reading is only the first volume of "Home-made
Electrical Apparatus." Written in a very clear and simple style, the
other volumes are invaluable to the young experimenter. There are no old
or obsolete forms of apparatus described but only the latest electrical
devices, making them

*The Most Thorough and Complete Books for*

*the Young Electrical Experimenter Published*

The partial Table of Contents below only gives a small idea of the
interesting matter contained in these volumes.

VOLUME II

72 Pages 55 Illustrations

Table of Contents

Chapter VI—ELECTRICAL MEASURING INSTRUMENTS. Galvanometers, Ammeters,
Voltmeters, etc.

Chapter VII—CURRENT CONTROL DEVICES. How to Make a Pole Changing Switch
or Current Reverser. How to Reverse Small Motors. Battery Rheostats.

Chapter VIII—HOW TO MAKE A TELEGRAPH KEY AND SOUNDER. How to Install a
Telegraph Line and Learn to Operate. Learning the Morse Code.

Chapter IX—HOW TO MAKE AND INSTALL A TELEPHONE.

Chapter X—MEDICAL COILS AND SHOCKING COILS.

Chapter XI—THE CONSTRUCTION OF SPARK COILS. A one-quarter inch Coil, a
one-half inch Coil, a one inch Coil. Experiments with Spark Coils.

VOLUME III

80 Pages 73 Illustrations

Chapter XII—HOW TO MAKE A DYNAMO-MOTOR.

Chapter XIII—HOW TO MAKE A TOY BATTERY MOTOR.

Chapter XIV—HOW TO BUILD AN ELECTRIC ENGINE.

Chapter XV—MINIATURE BATTERY LAMP LIGHTING.

Chapter XVI—COHERER OUTFITS FOR WIRELESS TELEGRAPHY.

Chapter XVII—HOW TO BUILD A TESLA HIGH FREQUENCY COIL. Experiments with
High Frequency Currents.

Chapter XVIII—AN EXPERIMENTAL WIRELESS TELEPHONE.

Chapter XIX—MISCELLANEOUS APPARATUS. Electrolysis of Water.
Electro-Plating. Electricity from Heat. A Handy Light. An Experimental
Arc Lamp. A Magnetic Diver. Magnetic Fish. A Magnetic Clown. An Electric
Breeze. A Static Motor.

*Price Postpaid, 25 Cents per Volume*

All three volumes can be supplied bound together with handsome cloth
cover for $1.25 postpaid.

*Parts and Materials*

For Building the Apparatus Described in this Book

We have received so many requests from our customers for information as
to where they may obtain some of the materials required to build the
apparatus described in this book, that we have made arrangements to
supply same. Our business is essentially publishing, and we do not
intend to go into the manufacture of, or to push the sale of apparatus
or parts. Knowing, however, that many of our customers live where they
are remote from cities or suitable supply houses, where they might
obtain the necessary materials, we believe that the value of our books
will be increased ten fold to the reader if we are in a position to
furnish parts, etc.

*M500* Complete Set of Parts for Dynamo illustrated in Figure 132
*$3.75*

Shipping Weight, 5 lbs.

*M631* Complete Set of Parts for Tesla Coil *4.50*

Shipping Weight, 4 lbs.

*M631A*
Completed Tesla Coil *6.00*

Shipping Weight, 10 lbs.

*M631B*
Complete Tesla Coil Outfit, consisting of Tesla Coil, two-inch
Spark Coil, Spark Gap and Leyden Jars *25.00*

Shipping Weight, 25 lbs.

Please use list number when ordering. Include postage to pre-pay mailing
charges, or we will ship by Express Collect. No parts supplied other
than listed above. All prices subject to change without notice. Send for
latest price list.

*COLE & MORGAN, Inc.*

P.O. Box 473, City Hall Sta. New York, N. Y.

*** End of this LibraryBlog Digital Book "Home-made Electrical Apparatus" ***

Home